• 제목/요약/키워드: Sheet Material

검색결과 1,576건 처리시간 0.041초

위성용 전개형 고안정 반사판 안테나 주반사판 제작 및 검증 (Manufacture and Qualification of Composite Main Reflector of High Stable Deployable Antenna for Satellite)

  • 김동건;김현국;김동연;구경래;안지민;최오영
    • Composites Research
    • /
    • 제37권3호
    • /
    • pp.219-225
    • /
    • 2024
  • 정찰위성의 탑재체인 위성용 전개형 반사판 안테나는 발사 환경에 대한 구조안정성 및 궤도 환경에 대한 운용 성능을 고려하여 경량화, 고성능의 구조 개발이 필수적이다. 그 중, 복합재 주반사판은 전개형 반사판 안테나를 구성하는 핵심 구성품이며, 발사체 탑재 성능을 고려한 경량 설계 뿐만 아니라 위성체 임무 수행 중 민첩한 자세제어 기동 이후 높은 품질의 위성 영상을 획득하기 위해서는 높은 전개 시 강성을 갖는 고성능의 주반사판 개발이 요구된다. 주반사판 개발을 위해 전개형 반사판 안테나를 구성하는 복합재 주반사판의 적층 설계 및 재료 물성에 따른 구조적 성능을 분석하여 주반사판의 초기 설계안을 도출하였으며, 도출된 초기 설계안을 기준으로 제작 공정을 변수로 4가지 타입의 복합재 주반사판을 제작하였다. 공정 변수로는 복합재 구조의 성형 공정, 탄소 섬유 복합재 시트와 허니콤 코어 간 접착 필름의 적용 유/무, 샌드위치 복합재 내부의 벤팅 경로를 선정하였다. 제작된 4가지 종류의 주반사판에 대해 무게 측정, 비파괴 검사, 표면오차 측정 및 모드 시험을 통한 전개 시 강성 측정을 수행하였으며, 경량 및 구조적 성능을 향상시킬 수 있도록 접착 필름을 미적용하며 벤팅 경로를 포함하는 주반사판 제작 공정을 선정하여 SAR(합성 개구 안테나)를 포함한 위성체에 실 적용이 가능한 복합재 주반사판을 개발하였다.

난연특성을 가지는 EVA/Intumescent/나노클레이 복합재료 제조 및 교호집성재(Cross Laminated Timber) 적용 기술 (Preparation of EVA/Intumescent/Nano-Clay Composite with Flame Retardant Properties and Cross Laminated Timber (CLT) Application Technology)

  • 최요석;박지원;이정훈;신재호;장성욱;김현중
    • Journal of the Korean Wood Science and Technology
    • /
    • 제46권1호
    • /
    • pp.73-84
    • /
    • 2018
  • 최근 들어 늘어나고 있는 도시형 화재 사고와 건축 외장재에 따른 화재 피해 사례의 증가에 따라 난연처리기술의 중요성이 부각되고 있다. 특히, 목재를 기반으로 한 건축재료의 활용에 있어서 난연처리기술은 더욱 중요하게 평가되고 있다. Intumescent 시스템은 비할로겐계 난연처리기술의 하나로, 발포와 탄화층 형성을 통하여 난연성을 구현하는 시스템이다. 본 연구에서는 Intumescent 시스템을 적용하기 위해 Ethylene vinyl acetate (EVA)를 매트릭스로 채용하여 복합재료를 제조하였다. Intumescent 시스템의 난연특성을 강화하기 위해 나노클레이를 함께 적용하였다. Intumescent 시스템과 나노클레이 기술을 함께 적용한 복합재료를 시트상의 시험편으로 가공한 후, 이를 활용하여 표면의 난연특성이 강화된 새로운 구조의 교호집성재를 제작하였다. Intumescent 시스템을 적용한 복합재료의 연소특성 평가에서 최대 열방출량이 효과적으로 감소되는 것을 확인할 수 있었다. 표면에 부착된 구조에 따라 CLT는 두 단계에 걸친 연소 현상이 발생했다. 또한, 심부 연소 과정에서 최대 열방출률이 크게 감소하는 경향을 확인할 수 있었다. 이러한 특성은 목재의 연소과정에 있어 연소 확산지연효과가 있을 것으로 판단된다. 표면단판에 대한 난연처리기술 및 복합재료 적용 최적화 기술을 통해 보다 화재특성이 개선된 CLT 구조체 개발이 가능할 것으로 기대된다.

차근육묘를 위한 자재 및 배지 종류가 토양환경과 '설향' 딸기 자묘의 생장에 미치는 영향 (Influence of Root Restriction Materials and Media on Soil Environment and Growth of Runner Plantlets during Propagation of 'Seolhyang' Strawberry)

  • 박갑순;채수천;오찬식;최종명
    • 원예과학기술지
    • /
    • 제33권4호
    • /
    • pp.511-517
    • /
    • 2015
  • '설향' 딸기 차근육묘에서 배지 및 차근자재의 종류가 자묘 생장에 미치는 영향을 구명하고자 본 연구를 수행하였다. 연구목적을 달성하기 위해 폴리에틸렌 필름이 차근자재인 조건에서 팽연왕겨, 사양토 및 양질사토 등 세 종류 배지가 자묘 생장에 미치는 영향을 밝혔다. 또한 폴리에틸렌 필름(PE), 부직포(NF), 유공비닐(PP) 및 방근시트(RPS)의 네 종류 차근자재를 설치하고 팽연왕겨를 배지로 충진한 후 배지의 함수량 및 근권온도 변화와 자묘의 생장에 미치는 영향도 구명하였다. 런너에서 발생한 자묘를 세 종류 배지에 고정시키고 20일 및 40일 후 조사한 자묘의 생장에서 팽연 왕겨 처리가 착근 20일 후의 엽 면적과 관부 직경, 그리고 40일 후의 관부 직경, 근중 및 생체중 등 지상부 및 뿌리 생육이 가장 우수하였다. 네 종류 차근 자재를 깔고 팽연왕겨를 충진한 후 관수 주기별 배지의 수분함량(volumetric water content, VWC)를 조사한 결과 PE 처리는 관수 후 55%로 측정된 VWC가 관수 직전 26%로 낮아졌으며, PP는 10-16%, NF 및 RPS는 관수 후 다음 관수까지 10% 미만의 VWC를 유지하였다. 육묘 기간 중 PE 처리가 NF, PP 및 RPS 처리보다 차근 자재에 영향을 받은 오후 2-5시 사이의 배지온도가 약 $1^{\circ}C$ 낮았고, 주 야간 온도차는 $1.5^{\circ}C$ 적었다. 자묘의 초장, 생체중 및 근 중은 PE 처리가 가장 크거나 무거웠다. NF 및 PP 처리는 뿌리가 차근되지 않아 자묘 뿌리가 차근자재 윗부분에 제한적으로 존재하지 못하고 자재 밑으로 많은 근계가 형성되었다. 이상과 같이 PE를 차근자재로 삼은 경우 팽연왕겨가 바람직한 배지이고, 차근 자재로써 PE가 NF, PP 및 RPS 보다 자묘의 생장에 더 우수한 영향을 미쳤으며, 본 연구 결과는 딸기 양질묘 생산을 위한 기초자료로 활용될 수 있을 것이다.

이중 구조의 X선 차폐시트 설계를 위한 FLUKA 수송코드의 신뢰성 검증 (Reliability Verification of FLUKA Transport Code for Double Layered X-ray Protective Sheet Design)

  • 강상식;허승욱;최일홍;전제훈;양승우;김교태;허예지;박지군
    • 한국방사선학회논문지
    • /
    • 제11권7호
    • /
    • pp.547-553
    • /
    • 2017
  • 현재 의료분야에서는 방사선 차폐체로서 납(Pb)이 널리 쓰이고 있다. 하지만 납은 무게가 매우 무거워 납치마 등의 방호복은 장시간 착용이 어려우며, 인체에 치명적인 납 중독의 위험이 상시 가지고 있다는 문제점을 가지고 있다. 이러한 문제점을 해결하고자 납을 대체 할 수 있는 물질에 대한 많은 연구가 진행되고 있다. 현재 납의 대체물질로써 대표적인 바륨(Ba)과 요오드(I) 등은 우수한 차폐능을 가지고 있지만, 30keV 근처의 에너지 영역에서 특성 X선을 방출하는 특성을 가지고 있다. 환자나 방사선 종사자의 경우 차폐체를 인체에 접촉하고 있는 경우가 많으므로 차폐체에서 발생되는 특성 X선이 인체에 직접 조사되어 방사선 피폭을 증가시킬 위험이 매우 높다. 본 연구에서는 바륨(Ba)과 요오드(I)등에서 발생되는 특성 X선을 제거하기에 적절한 이중구조 차폐체를 방사선 수송코드 중 하나인 FLUKA 수송코드를 개발하여 선행연구로서 진행된 MCNPX 시뮬레이션과 비교 분석하여 이중구조 차폐체의 차폐율에 대한 신뢰성을 검증하고자 하였다. MCNPX와 FLUKA를 이용하여 황산바륨($BaSO_4$)과 산화비스무스($Bi_2O_3$)로 이루어진 다양한 두께조합의 이중구조 차폐체를 설계하였으며, IEC61331-1에 제시된 모식도를 기하학적으로 동일하게 시뮬레이션 상에 구현하였다. 또한, 120 kVp의 연속 X선 스펙트럼에 대한 차폐체의 투과스펙트럼과 흡수선량을 납과 비교 평가하였다. 평가결과, $0.3mm-BaSO_4/0.3mm-Bi_2O_3$$0.1mm-BaSO_4/0.5mm-Bi_2O_3$ 구조에서는 33 keV와 37 keV의 특성 X선을 모두 흡수하였으며, 90 keV 이상의 고에너지 X선에 대해서도 납과 거의 유사한 차폐효율을 보였다. 또한, FLUKA의 수송코드는 33 keV 이하에서는 cut-off 가 발생하여 저에너지 X선 광자에 대한 전산모사에 제약이 있지만, 40 keV 이상의 고에너지 영역에서 MCNPX와의 상대오차가 6 % 이내로 신뢰성이 매우 우수하다는 것을 확인할 수 있었다.

조선 후기 무위(武威)의 상징 대기치(大旗幟) 고증 (A historical study of the Large Banner, a symbol of the military dignity of the Late Joseon Dynasty)

  • 제송희;김영선
    • 헤리티지:역사와 과학
    • /
    • 제54권4호
    • /
    • pp.152-173
    • /
    • 2021
  • 대기치는 임진왜란 중에 새로운 군사 제도와 함께 도입된 깃발이다. 군사 훈련에서 표식으로 세워 군사들의 움직임을 통제하거나 상급자를 영접하기 위해 세우던 사방 4자 이상의 큰 깃발로 군영에서 국왕을 영접할 때 국왕 행차 앞에 세우는 어전 대기치, 사신 영접과 파견, 지방관의 행차 등에 다양하게 쓰였다. 군사 훈련권을 상징하는 대기치를 통해 무위를 과시하는 사회적 상황을 확인할 수 있다. 대기치의 깃대 장식을 영두·주락(상모)·운봉을 갖춘 I유형과 영두·주락·치미를 갖춘 II유형으로 나누어 형식적 특징을 분석하였다. I유형에는 청도기·각기·문기가, II유형에는 대·중·소 오방기와 금고기·표미기가 속하는데 각각의 용도에 맞추어 장식을 달리하였다. 깃발의 크기는 네 변이 4자 이상의 정사각형에 상하와 세로 한 면에 화염각을 달아 세로가 약간 긴 정사각형에 가까웠던 것으로 추정된다. 대기치는 음양오행의 원리에 따라 오방색을 기본으로 활용하였다. 대기치의 문양은 오방을 상징하는 신수와 도교 부적 글자를 결합한 대오방기, 오방을 호위하는 신장들을 그린 중오방기, 팔괘문을 그린 소오방기, 군문을 엄격히 지키라는 뜻의 익호 문양의 문기로 대별된다. 대기치 제작을 위한 채색 사료로 오사카부립도서관 소장품 컬러 필사본 『기제』를 18세기 중후반의 용호영의 견식으로 비정하고 본 논고 서술과 시각화 작업에서도 중요하게 활용하였다. 대기치의 바탕 재료는 군권의 위엄을 드러내기 위해 수입 운문대단을 썼다. 크기는 영조척 1자(30cm)를 적용하여 4자 깃발은 세로 170cm, 가로 145cm, 5자 깃발은 세로 200cm, 가로 175cm로 확정하였다. 아울러 국왕 의장기 중 대기 > 중기 > 대기치로 조선 후기 전체 깃발 안에서의 위계 질서를 확인하였다. 위의 문헌 및 회화 분석을 통한 고증과 유물 자료를 토대로 두 유형으로 나눈 대기치를 시각화하였다. 시각화에서는 본 논고에서 고증한 깃발의 크기, 깃대 장식, 깃발별 문양 장식을 고려하여 제시하였다. 깃발의 바탕은 운문대단으로 18세기 운보문단 유물에 표현된 운문과 보문 문양을 제시하여 원형에 가깝게 복원하고자 하였다. 색상과 크기, 재질의 문양, 부대물품 등을 함께 제시함으로써 3D 콘텐츠 제작뿐만 아니라 실물 제작까지 가능하도록 하였다.

바이오디젤 혼합물의 인화 및 연소 위험성에 관한 연구 (A Study on the Flammability and Combustion Risk of Biodiesel Mixture)

  • 김주석;고재선
    • 한국재난정보학회 논문집
    • /
    • 제17권1호
    • /
    • pp.10-24
    • /
    • 2021
  • 연구목적: 본 연구의 목적은 현재 대체연료로 사용하고 있는 바이오디젤과 일반디젤 혼합물의 위험성을 장비별(태그방식과 펜스키마르텐 방식) 시험방식에 따른 인화점 및 연소점의(밀폐, 오픈) 차이를 비교 분석, 측정함으로서 혼합물의 위험성을 확인하고, 화학물질의 위험성 평방법을 확립하여 화재원인 물질의 감식과 감정에 참고 자료로 활용하고자 함이다. 연구방법: 인화점 실험 방법 및 결과 처리는 원유 및 석유 제품 인화점 및 연소점 시험방법으로 사용되고 있는 테그밀폐식 및 펜스키마텐스식 시험방법인 ASTM 및 KS M mode를 기준으로 실험하였다. 본 실험에 사용한 장비의 제조사는 일본의 TANAKA사에서 생산한 장비로 KS M 2010의 시험규격을 만족하는 시험장비로 인화점 및 연소점을 측정하였고, 바이오디젤과 일반디젤 혼합물의 시험방식에 따른 인화점(밀폐, 오픈) 차이를 확인하고, 바이오디젤과 일반디젤 혼합물의 발화점을 기존의 디젤과의 비교 발화위험성을 비교 분석하였다. 연구결과: 실험결과를 살펴보면 먼저 혼합물의 인화 위험성에 대한 실험 결과 분석으로 인화점이 64.5℃인 일반 디젤을 기준으로 했을 때 바이오디젤이 70% 함유된 물질의 인화점은 약 92℃로 확인되었고, 가솔린과 바이오디젤 또는 바이오디젤 혼합물을 합성했을 때 인화점이 낮아지는 경향을 확인할 수 있었다. 아울러 인화점과 연소점의 차이는 약 20~30℃정도로 분석되었고, 소량의 가솔린 또는 메탄올의 혼합시 인화점은 낮아지나, 연소점은 기존의 혼합물의 연소점과 유사하다는 것을 확인하였다. 결론: 본 연구에서는 기존의 위험물안전관리법렬상의 위험물 판정 기준에 대한 세부내용의 실효성 확보 및 위험물 판정의 신뢰성 및 재현성 확보를 목적으로, 인화성 혼합물에 대한 실험적 연구를 통해서 혼합물에 대한 위험성 판단기준을 확인, 소방현장에서 단속되는 인화성 액체 대한 실험적 판정 기준에 대한 참고적인 자료를 제공할 수 있을 것이다. 또한 향후 본 연구로 시험방법별 실험에 대한 노하우를 축적한다면 위험물의 위험성 평가 연구에 있어 기초 자료이자 위험물 판정에 관한 연구의 기반으로 활용될 수 있기를 기대한다.

섬유판(纖維板)의 증강(增强)사이즈제(齊)가 재질(材質)에 미치는 영향(影響) (Effect of Strength Increasing Sizes on the Quality of Fiberboard)

  • 신동소;이화형
    • 한국산림과학회지
    • /
    • 제30권1호
    • /
    • pp.19-29
    • /
    • 1976
  • 습식(濕式) 경질섬유판(硬質纖維板) 제조(製造)를 위(爲)한 보강용(補强用) 사이징제(劑)로서 실험실(實驗室) 제조(製造) 석탄산수지(石炭酸樹脂), 요소수지(尿素樹脂)(음(陰)이온 형(型), 양(陽)이온 형(型)), 요소(尿素) 메라민 공축합수지(共縮合樹脂)와 일본(日本) M사(社)의 변성(變性)메라민수지(樹脂)(P-6100)와 변성(變性) 양(陽)이온형(型) 요소수지(尿素樹脂)(P-1500)등을 사용(使用)하여 섬유판(纖維板) 재질(材質)에 미치는 영향(影響)을 검토(檢討)하였다. 공시재(供試材)는 라왕(20%)+소나무(80%)로 사용(使用)하였고 침착제(沈着劑)는 황산알미늄을 사용(使用)하였으며 열압조건(熱壓條件)은 전기가열(電氣加熱) 푸레스로 $180^{\circ}C$, $50-6-50kg/cm^2$, 시간(時間)은 1-2-7분(分)으로 S-1-S 경질섬유판(硬質纖維板)을 제조(製造)하여 일주일 기건(氣乾)시킨 후(後) 그 성질(性質)을 조사(調査)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 섬유판(纖維板)의 비중(比重)은 각(各) 보강제(補强劑)의 처리량(處理量)에 따른 비중(比重)의 차(差)는 없으나 보강제(補强劑) 간(間)에는 고도(高度)의 유의차(有意差)가 있어 변성(變性)메라민수지(樹脂)가 제일 높고 양(陽)이온형(型), 음(陰)이온형(型) 및 요소(尿素) 메라민 공축합수지(共縮合樹脂)가 중간(中間)이며 석탄산수지(石炭酸樹脂)가 제일 낮았다. 2. 섬유판(纖維板)의 함수율(含水率)은 보강제(補强劑) 간(間)의 차(差)와 보강제(補强劑) 처리량(處理量)에 따른 함수율(含水率)의 차(差)가 전부(全部) 유의성(有意性)이 있었으며 전체적(全體的)으로 처리량(處理量)이 증가(增加)할 수록 함수율(含水率)은 떨어지나 2%와 3% 처리(處理) 간(間)의 함수율(含水率) 차(差)는 없었다. 3. 섬유판(纖維板)의 흡수율(吸水率)은 보강제(補强劑) 간(間) 및 파라핀 왁스유탁액(乳濁液) 처리량(處理量) 간(間) 모두 다 유의차(有意差)를 보이고 있다. 파라핀 왁스유탁액(乳濁液) 처리량(處理量)을 늘일수록 흡수율(吸水率)은 떨어져 내수성(耐水性)이 증가(增加)함을 보이고 있으며 P-6100 및 P-1500은 무처리(無處理)에도 표준규격(標準規格)을 만족시켜 주며 음(陰)이온형(型) 요소수지(尿素樹脂), 양(陽)이온형(型) 요소수지(尿素樹脂), 요소(尿素) 메라민 공축합수지(共縮合樹脂)의 산(酸)콜로이드는 내수제(耐水劑)를 1% 요구하고 석탄산수지(石炭酸樹脂)는 2%에 합격(合格)되고 있었다. 4. 섬유판(纖維板)의 곡강도(曲强度)는 보강제(補强劑) 간(間) 및 보강제(補强劑) 처리량(處理量) 간(間)에 모두 유의차(有意差)가 있으며 처리량(處理量)이 증가(增加)할 수록 곡강도(曲强度)는 증가(增加)하였다. P-6100이 가장 곡강도(曲强度)가 높고 P-1500, 양(陽)이온형(型) 및 음(陰)이온형(型) 요소수지(尿素樹脂), 요소(尿素) 메라민 공축합수지(共縮合樹脂)의 산(酸)콜로이드등(等)이 중간(中間)이며, 석탄산수지(石炭酸樹脂)가 곡강도(曲强度)는 제일 낮았다. 5. 섬유판(纖維板)의 품질(品質)과 경제적(經濟的)인 면(面)을 고려한다면 석탄산수지(石炭酸樹指)의 대체(代替)로서 산(酸)콜로이드 방법(方法)에 의한 요소(尿素) 메라민 공축합수지(共縮合樹脂)와 양(陽)이온형(型) 요소수지(尿素樹脂)를 사용(使用)하는 것이 가장 바람직하며 이들 변성수지(變性樹脂)에 대(對)한 개선(改善) 연구(硏究)가 계속 필요(必要)하다 하겠다.

  • PDF

종합병원의 비보험환자 처치행위 양상과 수가분석에 관한 연구 (An Analysis of Nursing Behavior and Unit of Treatment Cost of Non- Insurance Patients)

  • 오세영
    • 대한간호학회지
    • /
    • 제10권1호
    • /
    • pp.41-55
    • /
    • 1980
  • The medical care insurance system, being put into practice nearly for three years, seem to have brought about some considerable problems as serious for the government as to consider a revision of that system. As one of the most serious problems of present system, the treatment cost of insurance patients is so remarkably low in comparison with than of non-insurance cases that normal operation of hospitals is threatened and care services of low quality are induced. The researcher carried out this survey to analyze and bring to light several aspects of treatment cost of non-insurance patients as a material for a re-assessment of the cost of insurance cases which shows a a considerable difference in amount at the standpoint of hospitals with than of non-insurance cases and further, hoping the significant blind spot of present insurance system(that is, the absence of regulations' for cost assessment by patterns or types of health care treatment) will be mended in near future. The survey was carried out with the treatment invoice sheets of total 902 in-hospital Patients of a general hospital in Seoul during the period of the 2 nd quarter of the year(1979). Among total 902 patients, 694 cases were used for analysis, because those disease or syndromes shared by less than 10% of the patients were put aside before procession. The data were analyzed by kinds or types of diseases, demographic characteristics of patients, hospitalization patterns, types of nursing treatment, etc. The result of analysis was as follows 1. Among all the non-insurance cases, those who received one or more kinds of nursing treatment mounted up to 96. 7 %. The invoice issue frequency per person was 7.2 times, while that frequency per day for a person was 0.8, : the treatment cosr per person was ₩22,650 while its daily average was ₩2,430, due to the average 9.3 in-hospital days per person. 2. As to the nursing treatment types by the demographic characteristics of patients and hospitalization patterns. a. The unit cost female patients was generally more expensive them that of males, and independent nursing service was more given than other types of treatment. As to age, higher age groups received independent nursing service most, while the youngest group received instrumental and integrated nursing services. b. As to room grade, the unit cost of I.C.U. cases was the highest : and the cast of private room patients was higher than that of public room patients. By in-hospital days, the curve of function showed L. type : that is, the longer stay, the lower function. 3. State of treatment types by kinds of disease were ; a. Dependent nursing service showed comparatively high availability in surgical and neurologic disease and independent nursing service was most received by medical, obstetrical and urological patients, while instrumental and integrated services were most available for respiratory disease and obstetrical and neurologic diseases next. b. The invoice issue frequency per day for a patient was highest in obstetrical disease 3.8 times, and the unit cost(per one invoice sheet) was also highest in obstertrical disease(₩10,880) and next in neurologic cases(₩ 4,690 ). 4. As to the pertained departments. a. Cost amount per person was highest in department of Psychiatries daily cost was highest in obstetrical cases : while the invoice issue frequency was highest in obstetrics and next in pediatrics. b. In departments in need of surgical operation, dependent nursing care was highly availabl : while in internal medicine and obstetrics, independent service was higher. Psychiatrics showed the highest the of integrate nursing while pediatrics and obstetrics higher of instrumental services. The variation co-efficien of treatment cost came out to be relatively in high in special surgery, opthalmology and internal medicine. 5. State of treatment cost by types of nursing behavior was. a. The average frequency of invoice issue was 3.5 (times). Among the type four types of treatment, instrumetal service (4.3) and independent nursing behavior(3.9) showed higher frequency than average respectively. But as to unit cost (per invoice). dependent (₩5,200) and integrated (₩5,340) nursing care services were higher than average and considerably higher than the other two types. b. In repect patient distribution. independent nursing behavior(80.3% ) was the highest and depend ent nursing (31.7% ) the lowest. The variation co-efficient of treatment cost appeared highest in dependent nursing be havior as a whole, and among that, doctor's diagnosis showed the highest coefficient value (100.7). In conclusion, the variaty of treatment cost(treatment itself ) by various characteristics and treatment types pro- that treatment various sort of patients and treatment cost of various types of nursing behavior cannot be uniform. Therefore, to attain the equalization of health care service and its cost both for insurant and non-insurant patients, a more specific provision for assessment of cost should be added to the present medical care insurance system and, in addition, the cost of nursing treatment is desired to be inserted into the treatment invoice.

  • PDF

원격의료서비스 수용요인의 구조적 관계 실증연구 (Structural Relationships Among Factors to Adoption of Telehealth Service)

  • 김성수;류시원
    • Asia pacific journal of information systems
    • /
    • 제21권3호
    • /
    • pp.71-96
    • /
    • 2011
  • Within the traditional medical delivery system, patients residing in medically vulnerable areas, those with body movement difficulties, and nursing facility residents have had limited access to good healthcare services. However, Information and Communication Technology (ICT) provides us with a convenient and useful means of overcoming distance and time constraints. ICT is integrated with biomedical science and technology in a way that offers a new high-quality medical service. As a result, rapid technological advancement is expected to play a pivotal role bringing about innovation in a wide range of medical service areas, such as medical management, testing, diagnosis, and treatment; offering new and improved healthcare services; and effecting dramatic changes in current medical services. The increase in aging population and chronic diseases has caused an increase in medical expenses. In response to the increasing demand for efficient healthcare services, a telehealth service based on ICT is being emphasized on a global level. Telehealth services have been implemented especially in pilot projects and system development and technological research. With the service about to be implemented in earnest, it is necessary to study its overall acceptance by consumers, which is expected to contribute to the development and activation of a variety of services. In this sense, the study aims at positively examining the structural relationship among the acceptance factors for telehealth services based on the Technology Acceptance Model (TAM). Data were collected by showing audiovisual material on telehealth services to online panels and requesting them to respond to a structured questionnaire sheet, which is known as the information acceleration method. Among the 1,165 adult respondents, 608 valid samples were finally chosen, while the remaining were excluded because of incomplete answers or allotted time overrun. In order to test the reliability and validity of the assessment scale items, we carried out reliability and factor analyses, and in order to explore the causal relation among potential variables, we conducted a structural equation modeling analysis using AMOS 7.0 and SPSS 17.0. The research outcomes are as follows. First, service quality, innovativeness of medical technology, and social influence were shown to affect perceived ease of use and perceived usefulness of the telehealth service, which was statistically significant, and the two factors had a positive impact on willingness to accept the telehealth service. In addition, social influence had a direct, significant effect on intention to use, which is paralleled by the TAM used in previous research on technology acceptance. This shows that the research model proposed in the study effectively explains the acceptance of the telehealth service. Second, the research model reveals that information privacy concerns had a insignificant impact on perceived ease of use of the telehealth service. From this, it can be gathered that the concerns over information protection and security are reduced further due to advancements in information technology compared to the initial period in the information technology industry, and thus the improvement in quality of medical services appeared to ensure that information privacy concerns did not act as a prohibiting factor in the acceptance of the telehealth service. Thus, if other factors have an enormous impact on ease of use and usefulness, concerns over these results in the initial period of technology acceptance may become irrelevant. However, it is clear that users' information privacy concerns, as other studies have revealed, is a major factor affecting technology acceptance. Thus, caution must be exercised while interpreting the result, and further study is required on the issue. Numerous information technologies with outstanding performance and innovativeness often attract few consumers. A revised bill for those urgently in need of telehealth services is about to be approved in the national assembly. As telemedicine is implemented between doctors and patients, a wide range of systems that will improve the quality of healthcare services will be designed. In this sense, the study on the consumer acceptance of telehealth services is meaningful and offers strong academic evidence. Based on the implications, it can be expected to contribute to the activation of telehealth services. Further study is needed to assess the acceptance factors for telehealth services, such as motivation to remain healthy, health care involvement, knowledge on health, and control of health-related behavior, in order to develop unique services according to the categorization of customers based on health factors. In addition, further study may focus on various theoretical cognitive behavior models other than the TAM, such as the health belief model.

품질개량제 첨가가 냉동반죽의 Microwave 가열특성에 미치는 영향 (The Additional Effects of Various Materials on Microwave Heating Property of Frozen Dough)

  • 김은미;한혜경;김인호
    • 한국식품과학회지
    • /
    • 제37권6호
    • /
    • pp.873-881
    • /
    • 2005
  • 본 연구는 전분성 냉동제품의 저장기간 중 발생하는 제품표면의 노화현상과 전자레인지 조리 후 식품표면의 수분증발에 따른 마름(경화)현상 등 제품의 품질저하특성을 일차적으로 원료측면에서 개선하고자 기존에 사용되고 있는 전분성 물성개량제의 첨가효과와 polyethylene(PE)포장에 따른 품질변화를 전자레인지 조리특성과 함께 검토하였다. 첨가원료에 대한 효과는 현재 산업체에서 적용되고 있는 기본반죽조성물에 34종의 첨가원료를 농도별로 혼합하여 증숙 및 전자레인지 가열조리에 대한 기호도 조사로 검토하였다. 기호도 조사로 전분류(TA, ST), 검류(AR, XT), 유화제(E, S1)의 총 6종의 시료가 선별되었으며, 선별된 6종의 첨가원료 중 TA 혼합반죽물이 텍스쳐, 외관, 색감에 따른 기호도가 가장 높은 것으로 조사되었다. 선별된 시료가 첨가된 혼합반죽물의 amylogram 결과, TA 혼합반죽물의 호화개시온도는 $61.5^{\circ}C$로 가장 낮았고, 최고점도는 227 B.U.로 가장 높았다. 노화경향을 예측할 수 있는 setback값 또한 24-79 B.U.까지 낮은 191 B.U.로 노화개선에 효과적임을 보였다. ${\alpha}-amylase-iodine$법을 이용한 노화측정은 전자레인지 가열조리 중 대조구는 31.59%(비포장), 34.52%(PE포장)로 가장 높게 나타났고, 20.08%, 20.48%로 비포장 처리된 E와 TA 혼합반죽물의 노화정도가 가장 낮게 나타났다. 전자레인지 가열조리 처리구에서는 비포장처리 시료보다 PE 포장처리 시료의 노화가 5-10% 정도 노화정도가 심화된 것을 확인하였다. 기계적 물성변화는 증숙조리 시 대조구의 hardness, cohesiveness, springiness, chewiness 등이 높은 경향을 보였다. 전자레인지 가열조리 시에는 증숙처리구보다 hardness, cohesiveness, gumminess. chewiness가 감소하는 경향이 나타났고, 대조구에 비해 hardness는 감소, cohesiveness는 증가하였다. 미세구조변화는 전자레인지 가열조리에서는 대조구가 격자무늬 형태가 붕괴되고 작은 균일한 기공을 갖는 것으로 조사되어 첨가구간의 미세구조 차이를 식별할 수 있었으며, 특히 TA 냉동만두피의 경우 균일한 크기의 기공으로 보아 망상구조의 재배열이 다른 첨가구에 비해 덜 붕괴되었고, 대조구는 기공이 크고 불규칙하였다. 전반적인 TA 전분 첨가구가 전자레인지 가열조리에 의한 품질 저하를 개선하는 것으로 나타났으며, PE 포장조리에 따른 노화억제효과는 크게 나타나지 않았다.