• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.713-719
• /
• 2015

통신 회선에 대한 전력선 전자유도 전압을 측정할 때, 일반 통신 케이블의 쉬스 층 및 측정 대상 통신 회선 접지의 상호 접속 관계에 따른 전압 변화를 비교 분석하였다. 케이블 양측 쉬스 접지 저항이 평균 $42.6{\Omega}$으로 유사한 상태에서 쉬스를 분리 접지하고 유도 전압을 측정하면 쉬스 접지를 하지 않은 상태에서 측정한 유도 전압에 대하여 10 % 미만 감소된다. 어느 한 쪽을 공통으로 접지하면 약 50 % 감소되고 양측을 모두 공통으로 하면 90 % 넘게 감소된다. 이것은 국제전기통신연합(ITU)에서 제공하는 계산식으로 계산하였을 때의 결과와 유사한 것으로 분석되었다. 아울러 ITU의 계산식을 활용하여 양측 쉬스 접지 저항 값을 변화시킬 때의 유도 전압 변화를 시뮬레이션하여 비교 분석한 결과, 실제 현장에서 쉬스 접지 저항 기준이 $100{\Omega}$이고 전화 국사의 저항이 보통 $10{\Omega}$ 이하인 점을 감안할 때 측정 오차율은 약 10 % 이하가 된다.

• 한국군사과학기술학회지
• /
• 제22권6호
• /
• pp.763-772
• /
• 2019

There is a need to use sheath flow nozzle to detect bioaerosol such as virus and bacteria due to their characteristics. In order to enhance the detection performance depending on nozzle parameters, numerical analysis was carried out using a commercial code, ANSYS CFX. Eulerian-lagrangian approach method is used in this simulation. Multiphase flow characteristics between primary fluid and solid were considered. The detection performance was evaluated based on the results of flow field in nozzle chamber such as focusing efficiency and swirl strength. In addition, Latin hypercube sampling(LHS) of design of experiment(DOE) was used for generating a near-random sampling. Then, the acceleration section is optimized using response surface method(RSM). Results show that the optimized model achieved a 6.13 % in a focusing efficiency and 11.47 % increase in swirl strength over the reference model.

• Archives of Reconstructive Microsurgery
• /
• 제23권1호
• /
• pp.29-32
• /
• 2014

Few articles have been written about the flexor tendon sheath ganglion in the finger, especially, between A1 pulley and A2 pulley. We report on rare cases of flexor tendon sheath ganglion with one symptomatic and two asymptomatic. All masses were evaluated using real-time ultrasonography and well-defined anechoic cystic lesions with posterior enhancement were observed. A 17-year-old female had a small mass at the 4th metacarpophalageal joint of her right hand, with pain and triggering. The patient underwent simple excision and a ganglion measuring $1.0{\times}0.8$ cm in size was derived from Camper's chiasm, between A1 pulley and A2 pulley. In two asymptomatic cases, ganglia measuring less than 0.5 cm in size observed. Based on our experience, real-time ultrasonography would be an excellent diagnostic modality in determining the treatment method in flexor tendon sheath ganglia, and surgical excision is recommended in symptomatic, especially triggering patients.

• Journal of Korean Biological Nursing Science
• /
• 제8권1호
• /
• pp.39-48
• /
• 2006

Purpose: To see the effects of capsaicin on the peripheral nerve damage of intervibrissal fur in mature rats, Method: 24 female mature rats($200{\sim}250g$) are divided to 3 groups and compared with each other. Immunofluorescence dye using CGRP and PGP antibodies was performed and 8 weeks after administration of capsaicin with control group. Result: The immunopositive reaction against PGP and CGRP was reduced by the damage of epidermal and dermal endings in unmyelinated sheath and thin myelinated sheath and the group after 8weeks showed distinct positive reaction of PGP and CGRP than the group after 4 weeks which means the recover of nerves. Conclusion: As a result, capsaicin influenced on pain-related neurotransmitter like CGRP when administerd to mature rats and even though it caused the damages on unmyelinated sheath and thin myelinated sheath, the damaged nerves recovered after 8 weeks. Also the research about sensory nerve endings scattered over middle dermal and deep epidermal layers such as lanceolate, merkel reticular, Ruffini endings should be studied when the research of the inner conical body is performed. Further studies are necessary about the toxicity and effect of capsaicin on the peripheral nerve endings.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2011년도 제45차 학술발표회
• /
• pp.35-35
• /
• 2011

Phase change material(PCM) has thermal energy storage and been attracted attention. Latent heat of the organic PCM can keep maintaining temperature when the change of outside energy conditions influence to PCM. Thus, many researchers have interested to thermal energy storage ability and investigated to applications such as thermal storage of solar energy, bioclimatic building, icebank, medical application, clothing industry and so on. Among the many applications, investigation of the PCM in clothing industry is also important because the people has interest functional factor called health-care in the clothing. In addition, PCM can give them mild environment condition such suitable temperature control or humidity. To fabrics, the PCM has various methods such as microcapsule, padding and modified cross-section formation(Sheath/core). Sheath core PCM fabric has a better benefit of durability than other method. However, PCM sheath/core spinning is difficult. In addition, dyeing property is important to use clothing industry due to visual images. In this study, we investigated dyeing properties of Nylon/PCM sheath/core fabrics. Especially, we observed the relation between dyeing property and PCM including ratio. Various temperature and pH conditions were also studied to optimize dyeing properties as acid dye.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(2)
• /
• pp.216-221
• /
• 1998

A study on induction plasma deposition with ceramic materials, yttria-stabilized-zirconia ZrO$_2$-Y$_2$O$_3$ (m.p 264O $^{\circ}C$), was conducted with a view developing a new method for nuclear fuel fabrication Before making dense pellets more than 96％TD., the spraying condition was optimized through the process parameters, such as chamber pressure, plasma plate power powder spraying distance, sheath gas composition, probe position, particle size and powders different morphology. The results with a 5mm thick deposit on rectangular planar graphite substrates showed a 97.11％ theoretical density when the sheath gas flow rate was Ar/H$_2$120/20 l/min, probe position 8cm, particle size -75 ${\mu}{\textrm}{m}$ and spraying distance 22cm by AMDRY146 powder. The degree of influence of the main effects on density were powder morphology. particle size, sheath gas composition, plate power and spraying distance, in that order. Among the two parameter interactions, the sheath gas composition and chamber pressure affects density greatly. By using the multi-pellets mold wheel type, the pellet density did not exceed 94%T.D., owing to the spraying angle.

• 한국건축시공학회지
• /
• 제1권2호
• /
• pp.191-195
• /
• 2001

When top down method is used, it could be a construction method trouble in column joint, between the former concrete and the latter. It could bring a void and weak concrete in column. The purpose of this study is finding a way to prevent concrete void and concrete suitable for top down , through V-metering for top down column and concrete experiment. To minimize the void of reverse placement joint, It is more effect to use the sheath method then direct method in concrete placement.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전력기술부문
• /
• pp.405-407
• /
• 2006

The power system analysis based on the accurate impedance of the individual underground cable, which is the inter connected to a large power system, is required. A study on calculation method of impedance allowable current for underground cables. furthermore, various methods of bonding and earthing the sheath have been used for the purpose of eliminating or reducing the sheath losses. the effectes of bonding and earthing must be includied in impedances. therefore, the subject of predicting thermal performance of soil and cable systems has been received increasing attension. for these problems, this paper describes a general formulation of impedance that is based on the effect of crossbonding and earthing of the sheath on the 66kV, 132kV and 220kV underground cable systems. also the work is presented, for calculating the temperature rise of power cable and soil.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.294-295
• /
• 2015

Many unbalanced factors of underground transmission power cable, such as burying types and the length difference of the cable between each minor section, etc will cause the impedance unbalance and excessive circulating current between cables. So this paper presents the analysis of sheath circulating current in accordance with the distance between the center conductors and phase arrangement. ground resistance value changes on 154kV transmission system. Based on these simulation results, this paper will contribute to the reduction method of sheath circulation current.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.578-578
• /
• 2013

We proposed a method for synthesized nanoparticle trapping in capacitively coupled plasma (CCP) reactor. The nanoparticle in nonthermal plasma can be negatively charged by a charged particle in plasma. Thus, it can be placed between sheath and bulk plasma with zero net force on nanoparticle. However, synthesized nanoparticle can be pumped out due to the neutral drag force when the large size of sheath thickness. We try to make a potential well using the sheath for trapping the synthesized nanoparticle.