• Journal of Welding and Joining
• /
• v.18 no.4
• /
• pp.38-47
• /
• 2000

Characteristics of the interface between tube and tube sheet which were formed by explosive expansion and roll expansion, have been studied in the research. The results are as follows: Optimum amounts of explosives for the expansion of Alloy 600 (19.05mm and 15.88mm) were found to be RDX 3.5-8.5g/m. Because explosive expansion caused les strain hardening and increased bounding strength, characteristics of the explosively expanded were better than those of mechanically expanded. As the transition region of the explosive expansion is inactive, the resistance to the stress corrosion cracking increases by 30∼40% compared to the roll and hydraulic expansion.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.5
• /
• pp.196-203
• /
• 2005

A semi-empirical method to determine the electrostatic characteristics of a diode type corona aerosol charger based on ion current measurement and electrostatic charging theory was presented. Results from mathematical model were in agreement with those from experimental investigation of the charger. Current-voltage characteristics, $N_{i}t$ product and charge distribution against aerosol size were obtained. It was shown that the space charge was significant and must be taken into account at high ion number concentration and low flow rate. Additionally, significant particle loss was evident for particles smaller than 20 nm in diameter where their electrical mobility was high. Increase in charging efficiency may be achieved by introducing surrounding sheath flow and applying AC high voltage. Overall, the approach was found to be useful in characterizing the aerosol charger.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.4
• /
• pp.641-647
• /
• 2008

In this paper, we have studied the basic discharge characteristics of ac-type cylindrical microcavity structure. The structure has a two electrodes, which are positioned in the bottom of the cavity and in the side wall of the cylinder, respectively. The discharge showed asymmetric phenomena depending on the position of a cathode electrode. When the bottom electrode was a cathode, the discharge was stronger even though the area of the cathode was smaller than that of the anode. Simulation results revealed that the focused electric field toward the bottom electrode increased ion density in the space which in turn strengthened the cathode sheath and ionization process.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.11
• /
• pp.1199-1204
• /
• 2004

Most overhead transmission lines in Korea run over the mountain; however, only little study has been made for the effect of mountain fire on polymeric insulator for transmission lines, though the study is significantly required, Therefore, in this study, the authors observed the deformation of the sheds of the insulator under fire, varying the ignition time using artificial ignition testing equipment, and investigated electrical and mechanical characteristics of the insulator through dry withstand voltage test, impulse flashover test and tensile load test. As the results of the tests, the following conclusions were obtained, First, when the insulator was subjected to the fire, the electrical characteristics were slightly reduced, but there was no change on the mechanical characteristics, Secondly, the sheds and sheath of the insulator were not non-flammable but less-flammable. These two results show the high mechanical stability and durability of the insulator under severe fire condition, though the electrical characteristics can be deteriorated as the time that the insulator is subjected to fire, goes by.

• Journal of Drive and Control
• /
• v.21 no.1
• /
• pp.8-15
• /
• 2024

This thesis investigates the jetting characteristics of an aerosol jet printing (AJP) process as a function of design and operating conditions. The governing equations of the AJP system are derived for experimentation and analysis. To understand the characteristics of the AJP system, it analyzes the jetting characteristics as a function of the flow rate of the carrier gas and the sheath gas, and the variation of the linewidth with the nozzle exit size based on particle tracking. The thesis focuses on computational fluid dynamics (CFD), which is a computer simulation. The particle tracking results obtained by CFD were analyzed using MATLAB. CFD analytical models can be analyzed in environments with different conditions and consider more specific situations than mathematical computational models. The validity of the CFD analysis is shown by comparing the experimental results with the CFD analysis.

• Journal of Drive and Control
• /
• v.21 no.2
• /
• pp.8-14
• /
• 2024

This paper investigates the jetting characteristics of an aerosol jet printing (AJP) process as a function of design and operating conditions. The governing equations of the AJP system are derived for experimentation and analysis. To understand the characteristics of the AJP system, this thesis analyzes the jetting characteristics as a function of the flow rate of the carrier gas and the sheath gas, and the variation of the linewidth with the nozzle exit size based on particle tracking. This thesis focuses on computational fluid dynamics (CFD), which is a computer simulation. The particle tracking results obtained by CFD were analyzed using MATLAB. CFD analytical models can be analyzed in environments with different conditions and consider more specific situations than mathematical computational models. The validity of the CFD analysis is shown by comparing the experimental results with the CFD analysis.

• Science of Emotion and Sensibility
• /
• v.18 no.1
• /
• pp.49-58
• /
• 2015

This paper investigated far-infrared emission characteristics of ZrC imbedded heat storage knitted fabrics for emotional garment. For this purpose, ZrC imbedded heat storage PET was spun with high viscosity PET imbedded ZrC powder on the core part and low viscosity PET on the sheath part by conjugated spinning method. Ingredient analysis and far-infrared emission characteristics assessment of spun filament were carried out by EDS and FT-IR spectrometer. Two kinds of knitted fabrics were made using texturized ZrC imbedded PET for measuring thermal characteristics of ZrC imbedded heat storage PET. Zr peak was certified by EDS measurement and it was confirmed that content of Zr was 19.29%. Far-infrared analysis revealed that emission power at the range of wavelength, $5{\sim}20{\mu}m$ was $3.65{\times}10^2W/m^2$, and emissivity was 0.906. Heat storage analysis by KES-F7 system revealed that $Q_{max}$ of ZrC imbedded PET knitted fabric was lower than that of regular PET one and warmth keepability rate was higher than that of regular one, which means that ZrC imbedded PET knitted fabric has heat storage property. Thermal conductivity of ZrC imbedded PET knitted fabric was higher than that of regular PET one which was caused by high thermal conductivity of Zr itself. Hand property of ZrC imbedded knitted fabric was not inferior compared to regular PET knitted fabric, which preferably was found to be dependent on knit structure and surface property.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.2
• /
• pp.99-105
• /
• 1974

According to the content of sugar and starch of each positional leaf sheath and internode at heading and 4 weeks after it using IR667-Suwon 214 (high yielding var. having tropical Indica parantage) and Jinheung (local leading var. temperate Japonica) rice grown in various cultivation seasons the suitability of grouping into the high sugar type (sugar>starch), sugar, tendency (increasing tendency in sugar content), high starh type (starch>sugar) and starch tendency (increasing tendency in starch) in carbohydrate metabolism was reexamined as follows. 1. Sugar tendency appeared strongly in IR667 than Jinheung, internode than leaf sheath, late season cultivation than early season, 4 weeks after than heading and high temperature than low temperature. Thus at heading, leaf sheath and internode of Jinheung in early and late season cultivation were high starch type, and lower internode in early season cultiattion and leaf sheath and internode in late season for IR667 were high sugar type. In very late season all internodes of both varieties except 1st internode of Jinheung at heading were high starch type. At four week after heading all leaf sheaths except 1st and 4th one of Jinheung and all internodes were high sugar type. High sugar type was intensified 4 weeks after heading in leaf sheaths than in internodes of IR667 in early season and of both varieties in late season. 2. The upper three leaf sheaths and internodes seem to work in the same way for carbohydrate translocation. Among them upper ones showed sugar tendency at heading and starch tendency 4 weeks after heading and it was clear in Jinheung. 3. The later the cultivation season, the higher the carbohydrate content (sugar+starch), and such tendency was clear 4 weeks after heading and in IR667, suggesting teanslocation inhibition by low temperature. 4. Grain filling rate (weight increase per day) was more rapid in early season cultivation and IR667 took shorter days to reach maximum rate. 5. The later the cultivation season, the greater the percent contribution of carbohydrate before heading to yield and it was always greater in IR667, a leaf sheath type. 6. Sugar and starch ratio appears to be determined principally by metabolic characteristics of variety according to growth process and secondly but considerably by environmental factors.

• Applied Microscopy
• /
• v.39 no.2
• /
• pp.89-99
• /
• 2009

To investigate the morphological characteristics of spermatozoa of the grey red-blacked vole (Clethrionomys rufocanus) belongings to the subfamily Cricetinae, subgenus Clethrionomys were examined by scanning and transmission electron microscopes. The sperm head of C. rufocanus was an ax or hatchet in shape with a curved single dorsal hook. The total length of C. regulus sperm was 95.8 ${\mu}m$. The length of sperm head was 7.8 ${\mu}m$, and the tail (88.0 ${\mu}m$) consisted of four major segments: the neck (1.0 ${\mu}m$), middle piece (22.0 ${\mu}m$), and principal piece plus end piece (65.0 ${\mu}m$), respectively. The segmented columns were about 10~12 in number. The number of gyres of mitochondria ranged from about 170 to 178. The post-nuclear cap occupied about a half of nucleus. The equatorial segment is located between the post-nuclear cap segment and acrosomal cap on the nuclear surface. Nos. 1, 5 and 6 of the outer dense fibers were larger than the others. A fibrous sheath and longitudinal column of the principal piece were in evidence, but the fibrous sheath was not seen at the end piece. In conclusion, the morphological structures of sperm head and tail may be useful information to patterning of sperm evolution and classifying of species.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.189-195
• /
• 2017

The only method used in the power stations in order to deliver generated electric power is 6 kV XLPE (or CV) single core cables. Among many kinds of accidents happening in the power stations, the outbreak of fire due to the deterioration of live cables causes enormous socioeconomic losses. From the installation of the cables, the management and diagnose should be thoroughly made. Even though it differs depending on the installations and usage conditions, the cross-sectional area of cables is in shortage. The excessive allowable temperature caused from the current causes the deterioration of cables. In order to prevent an unexpected breakdown of live cables, we have invented a device to monitor and diagnose the status of cables. We have installed our device in the Korea Western Power Co., Ltd.. In this paper, we present our research results in situ that we have obtained by measuring the temperature of sheath, changing with the surrounding circumstances, especially ambient temperatures. We also show our study results of characteristics for temperature of sheath surface and load current at the ambient temperatures of $40^{\circ}C-10^{\circ}C$.