• 한국정밀공학회지
• /
• 제17권9호
• /
• pp.62-69
• /
• 2000

Uneven clearances in the left and right sides of a press die cause deformation of the punch in precision shearing process. This deformation results from the compression stress and bending moment from shearing force in vertical direction and from the side force in horizontal direction acting to the punch, In this study the behavior of punch deformation is investigated in order to clarify the deformation state of the punch by using strain gauge deformation to shearing force side force bending moment radius of curvature and shear plane of the punch. Also we presented the calculation method of deformation size for the punch.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.235-238
• /
• 2009

This study is performed to investigate shearing characteristics for vibration damping sheet metals which are bonded with dissimilar sheet metals. A shearing tool set is designed and manufactured and shearing tests with the tool set are conducted at varying the magnitude of clearance in order to analyze the shearing characteristics. The shearing characteristics are analyzed for burr height and shape of sheared faces with respect to the magnitude of clearance between the punch and the die. The shearing test results demonstrate that optimum clearance is $8{\sim}12%$ of the sheet thickness at the shearing of the vibration damping sheet metals and the shearing direction has to be controlled deriving occurrence of the burr at the thick sheet of the vibration damping sheet metals.

• 한국의상디자인학회지
• /
• 제12권3호
• /
• pp.93-103
• /
• 2010

The results of comparison and analysis of dynamical features according to Jacquard structure are as follows. Regarding elongation(E) value in tensile property, the value in the direction of course was found to be larger in all Jacquard structure, except floating Jacquard, than the direction of wale. It could be found that, as to bending strength(B) in Bending Property, the value of bending strength in the direction of course smaller in all the textile(structure) except floating than the direction of wale, so that the ability of curve formation is excellent. And in case of floating Jacquard, it showed the smallest value in the direction of course and wale, so that it was interpreted as Jacquard having a soft feel. Blister Jacquard showed the highest value in both directions of course and wale, so that it was evaluated as Jacquard having the hardest touch. With regard to shearing character(G) and shearing hysteresis(2HG) in Shearing Property, Jacquard indicated the lowest value, so it was evaluated as the textile(structure) having high drape the transformation of whose fabric is easy. In addition, normal Jacquard, transfer Jacquard, blister Jacquard showed a high value, so that it could be known they are Jacquards having stiff touch. The study implies that normal Jacquard, bird's eye Jacquard, etc., which well stretch in the direction of a course like tubular Jacquard course, is better to make the margin a little shorter than the basic margin, and Jacquard that well stretches in the direction of wale like ladder's back Jacquard and floating Jacquard is better to make the margin longer and the length shorter than the basic margin.

• Journal of Mechanical Science and Technology
• /
• 제18권9호
• /
• pp.1493-1499
• /
• 2004

This paper describes the speckle shearing interferometry, a non-destructive optical method, for quantitative estimation of void defect and monitoring separation defect inside of a pneumatic tire. Previous shearing interferometry has not supplied quantitative result of inside defect, due to effective factors. In the study, factors related to the details of an inside defect are classified and optimized with pipeline simulator. The size and the shape of defect can be estimated accurately to find a critical point and also is closely related with shearing direction. The technique is applied for quantitative estimation of defects inside of a pneumatic tire. The actual traveling tire is monitored to reveal the cause of separation and the starting points. And also unknown void defects on tread are inspected and the size and shape of defects are estimated which has good agreement with the result of visual inspection.

• 한국지반공학회논문집
• /
• 제38권2호
• /
• pp.29-38
• /
• 2022

마찰 방향에 따른 전단 저항의 이방성을 지반 구조물에서 선택적으로 이용할 수가 있다. 예를 들어서, 축방향으로 하중을 가하는 깊은 기초, 소일 네일링, 타이백 등은 큰 전단 저항이 유발되므로 하중 전달 능력을 증가시키지만, 이와 반대로 말뚝 관입과 흙 시료 채취 등은 최소화된 전단 저항만 유발된다. 기존 연구는 뱀 비늘의 기하학적 형상과 유사한 표면 돌출부를 갖는 플레이트와 흙 경계면에서 유발되는 전단 저항 변화를 확인하였다. 본 논문에서는 표면 돌출부의 형상에 따른 경계면 마찰각의 변화를 정량적으로 평가하였다. 수정된 직접 전단 시험기를 이용하여 상대 밀도가 40%로 조성된 모래 시료에 대해 9개의 플레이트, 2개의 전단 방향(전단 시 돌출부 높이가 증가와 감소하는 방향), 그리고 3개의 초기 수직 응력(100kPa, 200kPa, 300kPa) 조건으로 총 51가지 경우를 실험 하였다. 실험 결과, 전단 응력은 돌출부 높이가 높을수록, 돌출부 길이가 짧을수록, 돌출부 높이가 증가하는 전단 방향에서 크게 나타났다.

• 소성∙가공
• /
• 제12권1호
• /
• pp.43-48
• /
• 2003

The strain state during the continuous confined strip shearing (CCSS) based on ECAP was tackled by means of a two-dimensional FEM analysis. The deformation of AA 1100 sheet in the CCSS apparatus was composed of three distinct processes of rolling, bending and shearing. The pronounced difference in the friction conditions on the upper and lower roll surfaces led to the different variation of the strain component ${epsilon}_13$ throughout the thickness of the aluminum sheet. Strain accompanying bending was negligible because of a large radius of curvature. The shear deformation was concentrated at the corner of the CCSSchannel where the abrupt change in the direction of material flow occurred. The process variables involving the CCSS-die design and frictions between tools and strip influenced the evolution of shear strains during CCSS.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.263-265
• /
• 2003

Stressed liquid crystals, SLCs, consist of a lowdensity polymer network dispersed in a nematic host. We induced stress by shearing the material. Alignment layers are not required because the liquid crystal director uniformly aligns along the direction of shear. The shearing stress also eliminates light scattering and results in sub-millisecond switching speeds, making them good candidates for video display applications.

• 한국통신학회논문지
• /
• 제24권9B호
• /
• pp.1704-1712
• /
• 1999

무인자율 주행시스템의 개발에는 인접 차량 유무 및 상대 속도의 정확한 검출이 매우 중요하다. 본 연구에서는 전방차량의 위치를 검출할 수 있는 효율적 방법을 제시한다. 종래 방법의 문제가 되었던 도로면상의 표식이나 그림자가 전방 물체로 잘못 판단되는 것을 막기 위해 Helmholtz shear 기법을 이용해 주어진 영상으로부터 residual disparity map을 얻은 후, 이의 히스토그램 분석을 통하여 전방차량의 위치를 효율적으로 검출하는 방법을 제안하였으며, 스테레오 카메라를 이용한 실제 영상으로 제안한 방법을 평가하였다.

• 소성∙가공
• /
• 제13권4호
• /
• pp.382-387
• /
• 2004

The continuous confined strip shearing (CCSS) based on the equal channel angular pressing (ECAP) was modeled by means of a rigid-plastic two-dimensional finite element method (FEM). Parallel to the simulations, samples of AA 1050 sheets were experimentally deformed by CCSS. The CCSS deformation led to the formation of through thickness texture gradients comprising a strong shear texture in the sheet center and weak shear textures in the sheet surfaces. FEM analysis revealed variations in the strain component $\varepsilon_13$ along the sample thickness direction, which gave rise to the evolution of different textures. A high friction between the sample and die surface was responsible for lowering intensities of the shear texture components in thickness layers close to the surfaces.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.298-303
• /
• 2003

In recent years, shearogrpahy has significantly improved capabilities in the areas of unbond and separation detection in tires. Although shearography has many advantages for qualitative evaluation, the technique remains the problem of quantitative analysis of inside defects, because shearography needs several effective factors including the amount of shearing, shearing direction and induced load, which exist as barrier for the quantitative analysis of inside defects. Since the factors are highly dependent on inspectors skill and also affect the in-situ workability. The factors were optimized and the size of cracks inside of pipeline and tire has been quantitatively determined.