A detailed understanding of the mechanical behaviors for crushed coal rocks after grouting is a key for construction in the broken zones of mining engineering. In this research, experiments of grouting into the crushed coal rock using independently developed test equipment for solving the problem of sampling of crushed coal rocks have been carried out. The application of uniaxial compression was used to approximately simulate the ground stress in real engineering. In combination with the analysis of crack evolution and failure modes for the grouted specimens, the influences of different crushed degrees of coal rock (CDCR) and solidified grout strength (SGS) on the mechanical behavior of grouted specimens under uniaxial compression were investigated. The research demonstrated that first, the UCS of grouted specimens decreased with the decrease in the CDCR at constant SGS (except for the SGS of 12.3 MPa). However, the UCS of grouted specimens for constant CDCR increased when the SGS increased; optimum solidification strengths for grouts between 19.3 and 23.0 MPa were obtained. The elastic moduli of the grouted specimens with different CDCR generally increased with increasing SGS, and the peak axial strain showed a slightly nonlinear decrease with increasing SGS. The supporting effect of the skeleton structure produced by the solidified grouts was increasingly obvious with increasing CDCR and SGS. The possible evolution of internal cracks for the grouted specimens was classified into three stages: (1) cracks initiating along the interfaces between the coal blocks and solidified grouts; (2) cracks initiating and propagating in coal blocks; and (3) cracks continually propagating successively in the interfaces, the coal blocks, and the solidified grouts near the coal blocks. Finally, after the propagation and coalescence of internal cracks through the entire specimens, there were two main failure modes for the failed grouted specimens. These modes included the inclined shear failure occurring in the more crushed coal rock and the splitting failure occurring in the less crushed coal rock. Both modes were different from the single failure mode along the fissure for the fractured coal rock after grouting solidification. However, compared to the brittle failure of intact coal rock, grouting into the different crushed degree coal rocks resulted in ductile deformation after the peak strength for the grouted specimens was attained.
Objective: This experiment was conducted to evaluate the optimal space allowance on growth performance, blood profile and pork quality of growing-finishing pigs. Methods: A total of ninety crossbred pigs [$(Yorkshire{\times}Landrace){\times}Duroc$, $30.25{\pm}1.13kg$] were allocated into three treatments (0.96: four pigs/pen, $0.96m^2/pig$; 0.80: five pigs/pen, $0.80m^2/pig$; 0.69: six pigs/pen, $0.69m^2/pig$) in a randomized complete block design. Pigs were housed in balanced sex and had free access to feed in all phases for 14 weeks (growing phase I, growing phase II, finishing phase I, and finishing phase II). Results: There was no statistical difference in growing phase, but a linear decrease was observed on average daily gain (ADG, p<0.01), average daily feed intake (ADFI, p<0.01), and body weight (BW, p<0.01) with decreasing space allowance in late finishing phase. On the other hand, a quadratic effect was observed on gain to feed ratio in early finishing phase (p<0.03). Consequently, overall ADG, ADFI, and final BW linearly declined in response to decreased space allowance (p<0.01). The pH of pork had no significant difference in 1 hour after slaughter, whereas there was a linear decrease in 24 h after slaughter with decreasing space allowance. Floor area allowance did not affect pork colors, but shear force linearly increased as floor space decreased (p<0.01). There was a linear increase in serum cortisol concentration on 14 week (p<0.05) with decreased space allocation. Serum IgG was linearly ameliorated as space allowance increased on 10 week (p<0.05) and 14 week (p<0.01). Conclusion: Data from current study indicated that stress derived from reduced space allowance deteriorates the immune system as well as growth performance of pigs, resulting in poor pork quality. Recommended adequate space allowance in a grow-to-finish production system is more than $0.80m^2/pig$ for maximizing growth performance and production efficiency.
지반의 액상화에 관한 연구는 대부분 깨끗한 모래를 대상으로 실시되었다. 하지만 실제 현장 지반이나 매립지는 깨끗한 모래만으로 이루어진 경우보다 실트나 점토와 같은 세립분을 포함한 상태로 존재하는 경우가 대부분이다. 이와 같은 현장 지반조건을 고려하기 위하여 사질토 지반 내에 포함된 세립분이 액상화에 미치는 영향에 대한 연구가 다수 수행되었으나, 대부분의 연구가 실트와 같은 비소성 세립분을 포함한 경우이다. 따라서 본 연구에서는 낙동강모래에 소성지수가 8, 18, 50, 377인 저소성 실트에서 고소성 점토질 세립분을 10% 함유한 공시체에 대하여 비배수 반복삼축시험을 실시하였다. 습윤 시료를 저다짐방법으로 느슨한 상태, 중간 상태, 조밀한 상태로 성형하였으며, 각각의 공시체에 세 종류의 반복전단응력을 가하였다. 세립분의 양은 동일하지만 공시체에 포함된 점토와 같은 소성 세립분의 소성지수가 높아질수록 액상화 저항강도는 전반적으로 감소하는 경향을 보였다. 한편, 공시체의 상대밀도가 느슨한 경우에는 세립분의 소성지수에 따른 액상화 저항강도 차이가 크지 않았으나, 조밀한 경우에는 세립분의 소성지수가 증가함에 따라 액상화 저항강도가 최대 40%까지 감소하였다.
서해남부해역에서 관측된 조위와 조류 관측자료를 분석하여, 수심이 얕고 간사지가 넓게 분포된 연안해역에서 비선형 조석 및 조류 특성을 뚜렷하게 보이는 것을 확인하였으며, 조석 비대칭을 발생하는 원인에 대해 수치 모형을 이용하여 검토하였다. 목포항에서 30여 년간 관측된 조위자료를 조화분석하여 주요 조석의 진폭과 위상의 연 변화를 살펴본 결과, 반일주조의 진폭은 증가하고 위상은 빨라졌으며, 일주조는 진폭과 위상의 변화가 거의 없었다. 이에 따라 반일주조의 상호작용에 의해 발생되는 대표적인 비선형 조석인 $M_4$ 분조와 $MS_4$ 분조의 진폭은 증가하고, 위상이 빨라졌다. 본 연구에서는 $M_2$ 분조의 전파과정과 $M_4$ 분조의 생성과정을 2차원 조석모형을 사용하여 모의하였다. 바닥마찰응력 산정방법, 조위변화 및 비선형항의 영향, 간사지 분포 등이 $M_4$ 분조의 생성에 미치는 영향에 대해서 조사하였다. 연구해역에서 바닥마찰계수가 일정 크기까지는 작아질수록 비선형 조석이 크게 생성되는 것을 확인하였으며, 바닥마찰응력이 커지면 오히려 조석 에너지의 소산으로 수심이 얕은 연안해역에서 $M_2$ 분조와 $M_4$ 분조의 진폭이 작아 졌다. 간사지를 바다로 치환하여 모의한 결과는 비선형 조석이 거의 발생하지 않아 간사지가 비선형 조석의 생성에 큰 영향을 미친다는 것을 확인할 수 있었다.
첨가제 선택을 위한 목적으로 성장단계별 육계 사료에 햄 철 성분, 규산염, 설탕 제조 부산물, 목초액을 첨가하여 실시한 첨가제 비교시험에서, 사육성적은 동일한 계사 내에서도 환경조건이 좋은 위치에서 사육된 대조구가, 다른 시험구보다 좋은 성적을 보여 사육환경의 중요성을 확인하였으며, 시험구중에서는 햄철 성분 첨가구가 증체량이 많았고 규산염 첨가구의 증체성적이 가장 낮았다. 따라서 설탕 제조 부산물의 메틸기 절약 효과는 사육시간의 경과와 함께 낮아져 다른 첨가제의 효능보다 낮았다. 사료효율은 첨가제를 혼합하지 않은 대조구의 공간 배치 잇점으로 사료 섭취량이 적고 체중증가가 커서 사료 요구율이 낮았고, 시험구 중에서는 목초액과 햄철 성분 첨가구가 거의 동일한 사료효율을 보였다. 축산연구소에 의뢰한 육질 평가에서는 사육성적이 좋았던 대조구를 제외한 시험구 중에서는, 규산염 첨가구의 보수성이 가장 좋았으나 가열 감량이 많아 도계 후 제품의 실중량이 작아지는 단점으로 인하여, 상품화에는 부적합한 것으로 사려된다. 대조구를 제외한 시험구 중에서는 햄철 성분함유구가 전단력과 가열감량, 조지방 함유량에서 좋은 점수를 받았고, 회사에서 실시한 관능검사 결과와 사육성적을 고려하였을 때, 햄철 성분이 함유된 첨가제를 이용한 제품개발이 가장 좋을 것으로 생각된다.
When domestic sewage and rainwater runoff are discharged into a single sewer pipe, it is called a "combined sewer system." The sewage design standards in Korea specify the flow velocity based only on the volume of rainfall; therefore, sedimentation occurs on non-rainy days owing to the reduced flow rate and velocity. This sedimentation reduces the discharge capacity, causes unpleasant odors, and exacerbates the problem of combined sewer overflow concentration. To address this problem, the amount of sewage on non-rainy days, not just the volume of rainfall, should also be considered. There are various theories on sedimentation in sewer movement. This study introduces a self-cleansing velocity based on tractive force theory. By applying a self-cleansing velocity equivalent to the critical shear stress of a sand particle, sedimentation can be reduced on non-rainy days. The amount of sewage changes according to the water use pattern of citizens. The design hourly maximum wastewater flow was considered as a representative value, and the velocity of this flow should be more than the self-cleansing velocity. This design method requires a steeper gradient than existing design criteria. Therefore, the existing sewer pipelines need to be improved and repaired accordingly. In this study, five types of improvement and repair methods that can maximize the use of existing pipelines and minimize the depth of excavation are proposed. The key technologies utilized are trenchless sewer rehabilitation and complex cross-section pipes. Trenchless sewer rehabilitation is a popular sewage repair method. However, it is complex because the cross-section pipes do not have a universal design and require continuous research and development. In an old metropolis with a combined sewer system, it is difficult to carry out excavation work; hence, the methods presented in this study may be useful in the future.
주요 조림수종으로 도입 식재된 리기다소나무의 고부가가치 이용을 위한 구조용 집성재 이용 가능성을 검토하고, 이에 적합한 기술을 개발하기 위하여 본 연구를 수행하였다. 국산 리기다소나무 제재목의 기계응력등급은 대부분 E7에서 E9등급으로 집성재 제조에는 다소 불량한 것으로 나타났다. 반면 단일수종 및 혼합수종 구조용 집성재 제조에 필수적인 리기다소나무 및 낙엽소 판재의 접착성을 평가한 결과 전단접착력, 목파율, 침지 및 삶음박리율 모두 KS기준 이상으로 나타났다. 리기다소나무 단일수종 집성재의 휨성능을 측정해본 결과 휨강도는 KS의 집성재 강도등급에 따른 휨성능 합격기준을 만족한 반면 휨 탄성계수는 기준에 다소 못 미치는 결과를 나타내었다. 그러나 낙엽송 층재와의 혼합구성을 통해 리기다소나무 집성재의 휨성능(휨강도와 휨탄성계수)을 20% 향상시킬 수 있었으며, 층재 구성방법에 있어서는 판재의 탄성계수가 높고 품질이 우수한 낙엽송 층재를 외층에 배치하는 방법이 보다 효과적인 것으로 확인되었다. 결론적으로 리기다소나무의 부가가치 증진을 위한 구조용 집성재 이용은 그 가능성이 매우 컸다.
본 연구에서는 영주댐 하류하천에서 유사공급에 의한 하도의 지형변화와 그 효과를 수치실험을 통하여 분석하였다. 본 수치모형의 모의 결과는 실내실험에서 보여준 토사더미의 이송과 확산과정과 잘 일치하였다. 초기에 토사가 공급된 구간에서 수면이 불연속적으로 형성되는 현상이 발생하지만, 시간이 증가함에 따라 하상고가 저하되면서 완만한 수면형을 형성하였다. 유사공급을 효과적으로 수행하기 위하여 댐 직하류에서 여울이 형성된 만곡부를 유사공급 위치로 선정하였다. 시간이 증가함에 따라 공급된 유사는 하류로 쓸려 내려가고 하상고는 저하되었으며, 유속이 감소되는 하류지점에서 퇴적되었다. 시간이 증가함에 따라, 하상고의 변화가 증가하고, 상류보다는 하류에서 크게 변화하였다. 유량이 증가함에 따라 횡방향 하상고 변화를 나타내는 하상기복지수는 증가하였으며, 하도의 역동성과 유사공급 효과가 큰 것을 알 수 있다.
본 논문은 3차원 축대칭 몰수체에 대해 소스 코드가 공개된 OpenFOAM 4.0을 이용하여 첫 번째 격자의 높이와 레이놀즈 수에 따른 마찰저항 변화에 대해 연구하였다. 마찰저항 계산을 위해 경계조건, 수치조건을 정립하였다. 축대칭 물체의 3차원 효과로 인해 거칠기가 매우 작은 $12{\mu}m$에서도 부드러운 표면과 비교해 마찰저항이 다르게 계산되었다. 레이놀즈 수가 커질수록 경계층의 두께 증가가 감소되었으며 이로 인해 마찰저항의 증가량이 감소되었다. 첫 번째 격자의 크기인 y+에 대한 영향에 대해서도 검토하였다. 첫 번째 격자가 log layer에 위치하고 있지 않으면 마찰저항과 표면의 전단력이 과도하게 예측되는 것을 확인하였다. 이는 경계층이 두껍게 예측되어 난류에너지가 과도하게 예측되었기 때문으로 판단된다. 표면의 거칠기가 커질수록 경계층이 두꺼워지고 표면의 난류에너지가 증가되는 것을 확인하였다. 마찰저항을 정확하게 예측하기 위해서는 y+ 값, 거칠기 및 벽함수가 적절한 영역에 위치해야 함을 알 수 있었다.
우리는 생활주변에서 파이프의 사용을 흔히 볼 수 있다. 그 만큼 파이프의 소요량은 우리 생활에서 엄청난 양이라 할 수 있는데 그것이 기존 재료로는 콘크리트나 철강제품이 대부분을 차지하고 있다. 요즈음 대체 재료로써 복합재료가 여러 산업분야에서 각광을 받고 있다. 처음 항공분야에서 사용이 시작되어 제품의 우수성 뿐 아니라, 그 값이 점차 낮아짐에 따라 여러 분야에서 사용되고 있다. 복합재료는 내구성, 내열성, 내부식성 등 다른 어느 재료보다 좋은 성질을 가지고 있으며 특히 중량이 가볍다. 파이프 매설 공사에 있어서 운반비의 비중은 전체 공사비에 약 20-40%에 달할 만큼 크다. 따라서 복합재료의 선택은 그 비용을 감소시킬 수 있을 뿐 아니라 내구성, 내열성 등 복합재료의 여러가지 우수성을 동시에 가질 수 있다. 그리고 재료의 발달이 가속되고 있어 앞으로 유용성은 더욱 커질 것이다. 지하매설 파이프로써 반경에 비해 두께가 얇은 관인 경우 큰 변형이 발생할 것이다. 따라서 기하학적 비선형성을 고려하여야 한다. 이를 위해 변형 후의 형상에 대해 평형방정식을 세웠으며, 이를 Galerkin's method에 의해 풀었다. 하중조건은 파이프가 땅속에 묻히게 되므로 수직하중은 매설깊이에 비례하며 수평하중은 수평변위에 비례하게 가정하였다. 복합재료로 만들어진 파이프는 층(layer)수와 fiber 방향 등에 따라 강성이 틀려지며 또한 흙의 종류와 발생되는 변위에 따라 파이프-흙간의 상호작용이 달라진다. 본 연구에서는 복합재료로 만들어진 파이프가 지하에 매설된 경우 기하학적 비선형을 고려한 해석방법을 제시하며 파이프 강성에 미치는 여러 인자에 대해 고찰해 보았다. 결과가 유한요소법에 의해 검증되었다. 기술고도화를 위한 과감한 측정관련 투자 결과가 제품의 불량감소에 크게 영향을 준다는 사실이 밝혀졌다. 연구결과에 따른 주요내용과 평가분석 모형을 제시한다.을 나타냄으로써 누에소화액 protease에 의하여 용해되지 않았음을 보여 주었다. 4. 결정성독소의 amino산 조성은 subsp. israelensis에서는 aspartic산이 14.5%로 가장 많은 비율을 차지하였고 그외 4개의 subsp.에서는 glutamic산이 13.9-14.6%로 가장 많았다. 5. 결정성독소의 면역학적 특성을 보면 subsp. israelensis의 항체는 그것의 항원과만 반응하고 그외 4개의 subsp.의 항체는 각각의 항원과 그리고 서로 다른 항원과 교호하여 반응하였다.화지방산을 다량으로 함유한 칠성장어유 및 옥수수유는 동맥경화증 랫트에 있어 생체내 지질대사에 영향을 미침으로써 혈청지질치를 저하시키고 동맥벽내에 지방침착을 억제시켰으며, 이러한 효과는 n-6계 다불포화지방산을 많이 함유하고 있는 옥수수유보다 n-3rP 다불포화지방산을 다량으로 함유한 칠성장어유에 더욱 크게 나타났다isozyme but not with p. esocinus B4 isogyme, reflecting that subunit B is less conservative in its evolution.e bands (fractions) with 290 Kd to 23 Kd molecular weight, and 8 bands of these detected bands developed strongly by silver stain. In serological test, ELISA, we recognized the cross-reaction
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.