• 설비공학논문집
• /
• 제13권12호
• /
• pp.1175-1183
• /
• 2001

Recently, a great attention has been paid to the ice thermal storage system for the purpose of energy saving and reduction in peak electrical demand. In the present study, it has been investigated the freezing behavior of several kinds of water solutions with nonionic surfactant. In order to prevent ice blockage in a cooled pipe, the amount and wall adhesion behavior of ice of the test fluids were observed experimentally under different concentration of water solution with surfactant, temperature of cooled wall, and the shear velocity of test fluids. The results showed that the size of ice crystal became smaller at higher shear velocity at wall. And the lowest limit of wall adhesion of ice in water solution with surfactant was found at 230 W/$m^2$ of heat flux.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.32-35
• /
• 1999

Poly(arylene ether phosphin oxide) (PEPO), Udel$^{\circledR}$ P-1700, Ultem$^{\circledR}$ 1000. poly(hydroxy ether) (PHE), carboxy modified poly(hydroxy ether)(C-PHE) and poly(hydroxy ether ethanol amine) (PHEA) were utilized for a coating of carbon fibers. Interfacial shear strength(IFSS) of polymers to carbon fibers was also evaluated in order to understand the adhesion mechanism. IFSS was measured via micro-droplet tests, and failure surfaces were analyzed by SEM. Diffusion between polymer and vinyl ester resin was investigated as a function of styrene content; 33. 40 or 50wt.% and the solubility parameters of polymers were calculated. The results were correlated to the interfacial shear strength. The highly enhanced interfacial shear strength (IFSS) was obtained with PEPO coating, and marginally improved IFSS with PHE, Udel$^{\circledR}$ and C-PHE coatings, but no improvement with PHEA and Ultem$^{\circledR}$ coatings.

• Journal of the Korean Wood Science and Technology
• /
• 제32권5호
• /
• pp.59-65
• /
• 2004

물고기의 공기 주머니인 부레를 말려 두었다가 물에 넣어 끓여서 만든 어교는 전통적인 방법으로 사용되고 있다. 어교의 경화시간에 따른 접착력과 접착력을 향상시키기 위한 방법으로 최적의 개방퇴적시간을 조사하여 어교의 접착특성을 연구하였다. TGA, DSC, FT-IR을 이용하여 경화 전과 후의 휘발성 물질(수분)의 변화량에 따른 어교의 경화특성과 어교의 반응성을 측정하였으며 자작나무 시편을 이용한 lap shear strength를 측정하여 경화시간과 개방퇴적시간에 따른 접착특성을 평가 하였다. 본 실험 결과 어교는 경화온도 22±1℃, 상대습도 43±2%에서 경화시간에 따른 접착력은 48시간에서 최대 강도를 나타냈으며 개방퇴적시간과 경화시간에 따른 접착력은 개방퇴적시간을 15분을 유지하고 6시간의 경화시간을 유지할 때 가장 높은 접착력을 나타냈다.

• 한국추진공학회지
• /
• 제5권3호
• /
• pp.60-70
• /
• 2001

PCP추진제인 ADP-505추진제와 적합한 라이너의 연구를 수행하였다. 추진제로부터의 고에너지 가소제의 이동을 막기 위하여 라이너의 바인다는 HTPB/DDI계로 선정하였고, EPDM 인슐레이션/라이너, 추진제/라이너, EPDM 인슐레이션/라이너/추진제의 박리 시험을 통하여 라이너 조성을 연구하였고, 예비 선정된 라이너로 접착력인 인장, 전단, 박리(peel) 시험을 수행하였다. 시험 결과 추진제와 라이너간의 접착력은 박리값이 1.5∼l.8daN/cm, 인장력이 5.5∼6.0 bar, 전단력이 4.2∼5.0 bar로 우수한 편이다. 마찬가지로 인슬레이션/라이너/추진제간의 접착력도 박리력이1.8daN/cm, 인장력이 5.0∼6.0bar, 전단력이 4.5∼5.0bar로 우수한 편이다.

• Journal of the Korean Wood Science and Technology
• /
• 제38권2호
• /
• pp.117-123
• /
• 2010

The objective of this research was executed to investigate the effect of molar ratio of formaldehyde to urea and melamine (F/(U+M)) of urea-melamine-formaldehyde (UMF) resin on bonding high and low moisture content veneers. For that purpose, UMF resin types with 5 different F/(U+M) molar ratios (1.45, 1.65, 1.85, 2.05, and 2.25) synthesized were used in present study. First, their curing behavior was evaluated by differential scanning calorimetry. Second, their adhesion performance in bonding high and low moisture content veneers was evaluated by probe tack and dry and wet shear strength tests. Curing temperature and reaction enthalpy decreased with the increase of F/(U+M) molar ratio. And the dry and wet shear strengthsof plywood manufactured from low moisture content veneers were higher than thoseof plywood manufactured from high moisture content veneers. Also, the maximum initial tack force on the low moisture content veneer was higher than that on the high moisture content veneer.

• 접착 및 계면
• /
• 제25권1호
• /
• pp.162-168
• /
• 2024

The effect of maleinized polybutadiene (MPB) on the mechanical properties of epoxy resins including adhesion strength, elongation and impact peel resistance was investigated in this study, in which MPB is an anhydride-functionalized polybutadiene prepolymer. Different molecular weights (3.1K and 5.6K) of MPB were added to diglycidyl ether bisphenol-A (DEGBA), an epoxy resin, to increase its impact peel strength and elongation. At various loading percent (5, 10, 15, 20 and 25 wt%) of MPB in the epoxy resin, significant improvements of mechanical properties were observed. According to the comparative analysis results, the modified epoxy system with 15 wt% (3.1K) MPB exhibited the highest lap shear strength, about 40% higher than that of neat epoxy. The tensile strength and elongation steadily and simultaneously increased as the loading percent of MPB increased. The impact peel strengths at low (-40℃) and room (23℃) temperatures were substantially improved by MPB incorporation into epoxy resins. Reactive and flexible MPB prepolymer seems to construct strong nano-structured networks with rigid epoxy backbones without sacrificing the tensile and adhesion strengths while increasing impact resistance/toughness and elongation properties. For higher impact peel while maintaining adhesion and tensile strengths, approximately 10-15 wt% MPB loading in epoxy resin was suggested. Consequently, incorporation of functionalized MPB prepolymer into epoxy system is an easy and efficient way for improving some crucial mechanical properties of epoxy resins.

• 접착 및 계면
• /
• 제6권3호
• /
• pp.19-25
• /
• 2005

합성 고무계 점착제는 일반적으로 SIS나 SBS 블록 공중합체와 점착부여수지, 가소제, 기타 첨가제를 함유한다. SIS/SBS 계 점착제는 우수한 접착력에도 불구하고 내용제성이나 내열성이 낮아서 그 사용에 한계가 있다. 이에 이러한 단점을 보완하고자 SIS/SBS 점착제에 가교제, 광개시제를 주성분으로 하는 자외선 경화 시스템을 도입하였다. 제조된 점착제는 thiol-ene 광중합 반응에 의해 가교하였으며 점착제의 프로브 택(probe tack), 박리강도(peel strength) 전단접착파괴온도(shear adhsion failure temperature, SAFT)를 측정하여 UV 경화형 점착특성을 고찰하였다. 또한 UV 경화형 점착제의 택 성질을 프로브 택을 이용하여 프로브 재료별, 점착제의 두께별의 영향을 살펴보았고 접촉각 측정을 통해 점착제 표면 변화를 살펴보았다.

• 접착 및 계면
• /
• 제21권1호
• /
• pp.20-26
• /
• 2020

Single lap-shear joints (SLJ) specimens with and without partial round fillets were fabricated to measure the average shear strength of adhesives. The effects of the length of the adherend on the SLJ specimens were also investigated. An epoxy adhesive was used to bond aluminum alloy. Tensile tests were performed on the adhesive bulk specimens to measure the mechanical properties. The finite element analysis (FEA) method was used to measure the adhesive stress distributions, i.e., the peel and shear stresses, on the bonded part. The experimental results revealed that the specimen consisting short length of adherend and without the partial round fillets exhibited the smallest average shear strength of adhesive among the investigated specimens. FEA revealed that the low average shear strength for the specimen with a short adherend length was caused by high stress concentrations on the adhesive at the edge of the bonded part.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.211-212
• /
• 2023

Polishing tiles among porcelain tiles are more durable and aesthetic than ceramic tiles, so their demand has recently increased. In particular, since polishing tiles have a very low absorption rate, organic adhesives with chemical bonds are mainly used. However, organic adhesives have low economic efficiency and some volatile organic compounds (TVOCs). Therefore purpose of this study was to evaluate the performance of polishing tile adhesion by developing organic-inorganic adhesives, which have chemical bonds and mechanical bonds. As a result, since the amorphous chain and chemical bonds of the polymer in the tile adhesives, both tensile and shear adhesion strength were satisfied with the KS L 1592, KS L 1593, and the rate of length change itself in the thermal cycling was lower than organic adhesives. So it is thought that it is possible to replace some organic adhesives.

• Journal of the Korean Wood Science and Technology
• /
• 제38권5호
• /
• pp.414-420
• /
• 2010

The effect of polymeric diphenyl methane-4,4-diisocyanate (pMDI) or 1,6-hexamethylene diisocyanate (HDI) in the UMF resin was discussed for improvement of the dry and wet shear strengths of plywood manufactured from high moisture content veneers. The curing behavior of UMF resin by pMDI or HDI content was examined by DSC and TGA, and its adhesion performance was evaluated by dry and wet shear strength tests of plywood. With the increase of pMDI content in the UMF resin, the curing temperature, reaction enthalpy (${\Delta}H$), and thermal stability consistently increased. With the increase of HDI content in the UMF resin, however, the curing temperature and reaction enthalpy (${\Delta}H$) decreased consistently and the thermal stability slightly increased in the range of 200 to $400^{\circ}C$ but decreased beyond $400^{\circ}C$. Also, the dry tensile shear strength increased up to the pMDI content of 5% and then decreased with its further addition but the wet tensile shear strength showed slight tendency to increase with the increase of pMDI content in the UMF resin. As the HDI content increased, however, the dry and wet tensile shear strengths of plywood consistently increased.