• Bulletin of the Korean Chemical Society
• /
• 제31권10호
• /
• pp.2877-2883
• /
• 2010

The folding kinetics of $WT^*$ ubiquitin variant with valine to alanine mutation at sequence position 26 (HubWA) was studied by stopped-flow fluorescence spectroscopy. While unfolding kinetics showed a single exponential phase, refolding reaction showed three exponential phases. The semi-logarithmic plot of urea concentration vs. rate constant for the first phase showed v-shape pattern while the second phase showed v-shape with roll-over effect at low urea concentration. The rate constant and the amplitude of the third phase were constant throughout the urea concentrations, suggesting that this phase represents parallel process due to the configurational isomerization. Interestingly, the first and second phases appeared to be coupled since the amplitude of the second phase increased at the expense of the amplitude of the first phase in increasing urea concentrations. This observation together with the roll-over effect in the second folding phase indicates the presence of intermediate state during the folding reaction of HubWA. Quantitative analysis of Hub-WA folding kinetics indicated that this intermediate state is on the folding pathway. Folding kinetics measurement of a mutant HubWA with hydrophobic core residue mutation, Val to Ala at residue position 17, suggested that the intermediate state has significant amount of native interactions, supporting the interpretation that the intermediate is on the folding pathway. It is considered that HubWA is a useful model protein to study the contribution of residues to protein folding process using folding kinetics measurements in conjunction with protein engineering.

• 패션비즈니스
• /
• 제18권3호
• /
• pp.134-147
• /
• 2014

The aim of this study is to create smart wear that brings out the perspective person's individuality and creativity wearing these garments through various interactions. It is intended to build a prototype for a "Shape-folding Dress", which is length-adjustable skirt that responses with the environment of the wearer. In this process, four basic physical properties can be identified with fabric samples selected which are relatively stiff, including fusible interlining, organdy, silk, and ramie. In addition, two types of folding pattern specimens, "Basic Pattern" and "Diamond Pattern", and heat-steam were used to make the specimens so that the correlation could be calculated by recovery rate among flexing, stiffness and tensile properties. As a result, compared to other fabrics, the silk showed low stress to repeat folding and unfolding process, and its recovery rate of elongation deformation was stable without being affected by the different folding types and twice repeated process. In this study, forming a circuit using an Arduino, illuminance sensor, motors, and pulley, the prototype was created with a silk fabric.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.925-926
• /
• 2013

• 소성∙가공
• /
• 제8권2호
• /
• pp.135-142
• /
• 1999

Tube Process(TP) is one of the processes to produce permanent magnets. Advantage claimed for this process is that it can accmplish both densification and anisotropication in one step forming. This process is distinguished from other processes since it uses deformable tube for densification of powder magnets. TP has, however, difficulties in manufacturing permanent magnets from Nd-Fe-B green powder due to folding resulted from large height reduction and localized densification. Therefore, an adequate preform is necessary to reduce folding resulted from large height reduction and localized densification. Therefore, an adequate preform is necessary to reduce folding, lead magnets into almost desired final shape and get uniform densification. In this paper, preform design for TP is carried out without a deformable tube to investigate the behaviour of magnet sinter-forging. Preform design is accomplished to increase the effective magnet area with a near net shape and uniform densification.

• 한국생산제조학회지
• /
• 제20권1호
• /
• pp.67-73
• /
• 2011

In this study, the manufacturing technology of a folding blind rivet was developed through finite element analysis(FEA). Numerical simulations of the folding blind rivet used to join two components have been performed with the finite element method for the forging process design. To minimize the process and manufacture the folding blind rivet without defects, a variety of design rules were proposed. From the results of FEA applied process design rules, an optimal six-stage process was proposed. The finite element simulation results such as shape of the forged rivet, strain distribution and forging load were investigated for the usefulness of the forging process of the blind rivet. In addition, the experiments have been implemented and their results were compared to the analytic results.

• 한국공간구조학회논문집
• /
• 제7권2호
• /
• pp.45-52
• /
• 2007

폴딩은 면에 기하학적 형태를 부여하는 동시에 역학적 효율을 증대시킬 수 있다. 본 연구의 목적은 건축의 조형성에 영향을 미칠 수 있는 폴딩을 구조와 형태의 매개로서 탐구하고, 그 역할과 가능성을 고찰하는 것이다. 따라서 먼저 폴딩의 특성과 패턴형성의 요소 및 이를 이용한 공간의 구성양식을 살펴본다. 또한 절판구조와 막구조에서 보이는 폴딩의 변형과 응용 방법을 파악함으로써 조형요소로서 역할과 가능성을 확인하고, 전개성을 응용한 형태로서 전개구조의 가능성을 확인한다.

• 소성∙가공
• /
• 제20권1호
• /
• pp.48-53
• /
• 2011

Fasteners are used to join the various electronic products and machines. So, the quality and reliability of the fastener are strongly requested. In this study, the analyses of the multi-stage cold forging of TORX screws for storage parts are carried out. In manufacturing of TORX screws, crack and folding defects are observed. Therefore, the analysis is focused on the prediction of the defects. Based on the analysis results, the upper die and process conditions are redesigned to reduce the defects. The upper die shape for preform forming is redesigned to prevent folding and sharp shape change. The Cockroft-Latham damage criterion is introduced to predict the crack initiation. Analysis results shows that the maximum Cockroft-Latham damage value is decreased by 40% in the forming using the modified upper die.

• 오토저널
• /
• 제7권3호
• /
• pp.42-55
• /
• 1985

The study is concerned with the investigation of curved line folding of developable surface from flat sheets of metal. General geometric relations among folding line, folded surface, folded angle are derived. From the derived geometric relations, the required plastic work and punch force are derived for the first approximation. Five methods of forming are suggested and the experiment is carried out using two chosen methods for the prismatic developable surfaces of which cross-sections have 103.deg.arc, 180.deg.arc, sinusoidal shape. In the die design for the tolding of prismatic developable surfaces, a stack of sheets were used to form shapes of the dies by which acceptable folded surfaces were obtained. The computed plastic work and punch force turned out to be in reasonable agreement with the experimental result.

• 한국정밀공학회지
• /
• 제27권1호
• /
• pp.25-32
• /
• 2010

With the latest automobile technology, though the third generation common rail system requires high injection pressures up to 1,800bar, the next generation diesel engine is expected to require more higher pressures than the third generation. The common rail pipe requires higher strength because it is one of the parts in the common rail system, which is influenced directly by fuel under high pressure. Preform design is very important for preventing head of the common rail pipe from folding in the heading process. In this study, die angle, curvature, outer diameter of die and length of trapped part are selected as main parameters to obtain best preform shape minimizing radius of folding. Therefore optimal design is carried out by finite element analysis and Taguchi method through main parameters. Results of the finite element analysis have good agreements with those of the experiments in the actual field.

• 한국정밀공학회지
• /
• 제32권6호
• /
• pp.509-515
• /
• 2015

Recent trends to reduce the size of mobile electronics products have driven miniaturization of various components, including screw parts for assembling components. Considering that the size reduction of screws may degenerate their joining capabilities, the size reduction should not be limited to the thread region but should be extended to its head region. The screw head is usually manufactured by forging in which a profiled punch presses a billet so that plastic deformation occurs to form the desired shape. In this study, finite element (FE) analysis was performed to simulate the forging process of a subminiature screw; a screw head of 1.7 mm diameter is formed out of a 0.82 mm diameter billet. The FE analysis result indicates that this severe forging condition leads to a generation of folding defects. FE analyses were further performed to find appropriate punch design parameters that minimize the amount of folding defects.