• 한국방재학회 논문집
• /
• 제10권6호
• /
• pp.73-80
• /
• 2010

최저 안전율 또는 최대 파괴확률을 기반으로 하는 기존의 사면안정해석에 대하여, 지반물성과 해석모델이 갖는 고유 불확실성을 최소화하고, 사면안정해석에서 다양한 안정해석모델과 그에 따른 파괴형상을 반영할 수 있도록, 다중 파괴모드를 고려한 사면의 신뢰성해석기법을 제안하였다. 파괴확률의 산정에는 체계 신뢰성해석분야에서 최근 도입된 선형계획법에 의한 최적화를 이용하였다. 이를 통하여 여러 가지 해석모델을 신뢰성 기반으로 동시에 고려하여 해석할 수 있다. 선형계획법에 의한 다중 파괴 모드를 고려한 파괴확률 산정기법을 이용하여 단순 사면의 경사도 결정을 위한 최적 설계를 검토하였다. 그 결과, 동시 파괴확률을 이용하면, 대상으로 하는 사면안정해석모델과 파괴형상 및 파괴확률을 복합적으로 고려할 수 있기 때문에 개선된 안전성을 확보할 수 있을 것으로 판단된다.

• Asia pacific journal of information systems
• /
• 제25권3호
• /
• pp.563-578
• /
• 2015

Forecasting daily box-office performance is critical for planning the distribution of marketing resources, and by extension, maximizing profits. For certain movies, the number of viewers increases rapidly at the beginning of their theatrical run, and the increments slow down later. Other movies are not popular in the beginning, but the audience sizes grow rapidly afterward. Thus, the audience attendance of movies grow in different trajectories, which are influenced by various factors including marketing budget, distributors, directors, actors, and word of mouth. In this paper, we propose a method for predicting the daily performance trajectory of running movies based on the hierarchical linear model. More specifically, we focus on the effect of online word of mouth on the shape of the growth curves. We fitted the mean trajectory of the cumulative audience size as a cubic function of time, and allowed the intercept and slope to vary movie-to-movie. Moreover, we fitted the linear slope with a function of online word of mouth predictors to help determine the shape of the trajectories. Finally, we provide performance predictions for individual movies.

• Wind and Structures
• /
• 제31권3호
• /
• pp.185-196
• /
• 2020

A method to reduce the wind pressure at the leading edge of a noise barrier was investigated by gradually lowering the height of a member added to the end of the noise barrier. The shape of the lowered height of the added member was defined by its length and slope, and the optimal variable was determined in wind tunnel testing via the boundary-layer wind profile. The goal of the optimal shape was to reduce the wind pressure at the leading edge of the noise barrier to the level suggested in the Eurocode and to maintain the base-bending moment of the added member at the same level as the noise-barrier section. Using parametric wind tunnel investigation, an added member with a slope of 1:2 that protruded 1.2 times the height of the noise barrier was proposed. This added member is expected to simplify, or at least minimize, the types of column members required to equidistantly support both added members and noise barriers, which should thereby improve the safety and construction convenience of noise-barrier structures.

• 대한치과보철학회지
• /
• 제30권3호
• /
• pp.321-337
• /
• 1992

The objective of this study was to compare the condylar path and the anterior angle of articular fossa and to analyze the pattern of condylar path in edentulus patients. Nineteen male and female edentulous patients with normal masticatory system ranging in age 42 to 78, without present symptoms and any history of TMJ disturbance were selected for this study. On the computer analysis on the transcranial radiographs of the TMJ, the angle of slope of articular eminance and condylar path to the Frankfort Horizontal Plane and the height of glenoid fossa was measured respectively, and stuied their interrelationship comparatively. Obtained results were asfollows. 1. The angle of the slope of articular eminence averaged 37.28 degree. and there was no significant difference between the right and left side. 2. The condylar path angle averaged 29.05 degree and there was no significant difference between the right and left side. 3. The height of the glenoid fossa averaged 8.11 mm and there was no significant difference between the right and left side. 4. The sequence of the frequence of condylar movement patterns were concavex curve(39.5% ), 'S' shape curve(34.2%), reverse 'S' shape(15.8%) and convex curve(10.5%). 5. The horizontal distance of the point of the changed curve of the condylar path averaged 2.91 mm. 6. The height of glenoid fossa was highly correlated to the slope of articular eminence and relatively highly correlated to tile condylar path and the condylar path was closely correlated to the slop of articular eminence.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.932-938
• /
• 2001

This study is concerned with the shape optimization of stem for the artificial hip prosthesis with unbonded cement mantle. The artificial hip prosthesis with unbonded cement mantle allows a stem to slip on cement mantle because of polished stem surface. Unbonded cement mantle type has several advantages compared with bonded cement mantle type, for example, small micro motion, preventing stress shielding and so on. In this study, 2-dimensional axisymmetric model was developed with considering characteristics of unbonded cement mantle. Moreover, optimal shape of stem was obtained by using feasible direction method. The objective of this optimization is maximizing supported vertical loading. The slip motion and stresses of stem, cement mantle and bone is used for constraints. The optimal shape which obtained by this study has slope of 0.15 in proximal part and maintains the width about 5mm in distal part In addition, simplified 3-dimensional analysis which applying optimal shape is carried out. The result of 3-dimensional analysis showed that optimal shape has some advantages for cement mantle stress. However, more realistic 3-dimensional analysis which including bending effect, complex geometries etc. is needed in further research.

• 대기
• /
• 제23권3호
• /
• pp.265-273
• /
• 2013

To investigate properties of cloud and rainfall occurred at Boseong on 10 July 2012, Raindrop Size distributions (RSDs) and other parameters were analyzed using observation data collected by Micro Rain Radar (MRR) and PARticle SIze and VELocity (PARSIVEL) disdrometer located in the National center for intensive observation of severe weather at Boseong in the southwest of the Korean peninsula. In addition, time series of RSD parameters, relationship between reflectivity-rain rate, and vertical variation of rain rates-fall velocities below melting layer were examined. As a result, good agreements were found in the reflectivity-rain rate time series as well as their power relationships between MRR and PARSIVEL disdrometer. The rain rate was proportional to reflectivity, mean diameter, and inversely proportional to shape (${\mu}$), slope (${\Lambda}$), intercept ($N_0$) parameter of RSD. In comparison of the RSD, as rain rate was increased, the slope of RSD became less steep and the mean diameter became larger. Also, it was verified that reflectivities are classified in three categories (Category 1: Z (reflectivity) > 40 dBZ, Category 2: 30 dBZ < Z < 40 dBZ, Category 3: Z < 30 dBZ). As reflectivity was increased, rain rate was intensified and larger raindrops were existed, while reflectivity was decreased, shape (${\mu}$), slope (${\Lambda}$), intercept ($N_0$) parameter of RSD were increased. We expected that these results will lead to better understanding of microphysical process in convective rainfall system occurred during short-term period over Korean peninsula.

• 한국지리정보학회지
• /
• 제17권2호
• /
• pp.121-135
• /
• 2014

최근 픽셀기반분류보다 더 많은 정보를 이용할 수 있는 객체기반에 대한 연구가 활발히 진행 중이다. 따라서, 본 연구는 인제군 Demilitarized Zone(DMZ)지역 일원을 대상으로 객체기반 분류기법을 이용한 토지피복분류를 실시하였다. 분류항목은 환경부 기준의 대분류 항목 7개, 중분류 항목 13개로 선정하였고, 사용된 인자는 분광 값의 평균과 표준편차, Grey Level Co-occurrence Matrix(GLCM)의 Homogeneity를 사용하여 감독분류방법 중 최근린기법을 이용하여 계층적 토지피복도를 구축하였다. 구축된 토지피복도를 이용하여 남방한계선으로부터의 거리와 Digital elevation model(DEM)을 통해 지형특성에 따른 분류항목 별 분포 특성을 분석하였다. 객체기반 분류를 위한 최적 가중치는 Scale 72, Shape 0.2. Color 0.8, Compactness 0.5, Smoothness 0.5로 선정하였고, 가중치 선정과정에서 Scale, Shape, Color가 가장 많은 영향을 주었다. 대분류 토지피복분류는 산림, 초지, 시가지의 순으로 각각 약 92%, 약 5%, 약 2%였으며, 중분류 토지피복분류는 활엽수림, 혼효림, 침엽수림의 순으로 각각 약 44%, 약 42%, 약 6% 순으로 분포하였다. 토지피복형태에 따른 분포특성을 보면, 남방한계선으로부터 2km이내의 지역에서 공공시설 지역과 도로의 이용이 높았으며, 남방한계선 6km이상의 지역에서는 논과 밭, 나지의 형태가 많았다. 산림은 표고 600m, 경사 $30^{\circ}$이상의 지역에서는 면적분포가 높았고, 농업지역과 나지, 초지는 표고 600m, 경사 $30^{\circ}$이하의 지역에서 면적분포가 높았다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권4호
• /
• pp.37-42
• /
• 2002

The purpose of this paper is comparing the forging effect according to the shape of preforms of cup shaped powder forging product, and extending the application of powder forging technology to more complicated cup-shaped products like pistons. In order to achieve this, preforms are provided by compacting, sintering, and machining to 5 different shapes, then forged to the final shape of products. The workability for sintered aluminium powder material was examined and confirmed its slope was 0.5 as known. Density and strain loci of forged products are also evaluated and compared. On the basis of the results, the most effective shape of preform was proposed. The preform for the piston which is 50mm in diameter was prepared and hot forged successfully to the final product.

• 한국재료학회지
• /
• 제4권8호
• /
• pp.927-933
• /
• 1994

비구형 입자들의 크기와 형태에 따른 침강 특성의 영향을 검토하였다. 비구형입자를 포함하는 서스펜션의 침강에서 $log \mu_{c}$대 $log \varepsilon$로부터 얻은 기울기 지표n값은 형태와 크기가 다른 입자는 같은 부피 농도에서 흡착되는유체량이 달라져 입자크기가 감소하거나 불균일한 경우 증가하는 경향을 나타내었다. 실험결고 비구형입자를 포함하는 서스펜션의 침강에서 기울기 지표 $n_{i}$값에 대하여 $n_{i}=n(a+b/d_{v})$와 같은 식을 얻었으며 이때 a, b는 입자형태에 따른 상수이다.

• 대한기계학회논문집A
• /
• 제30권11호
• /
• pp.1461-1471
• /
• 2006

This paper presents the mathematical model for rolling behaviors of a small regular polygonal part on an inclined plane. Throughout the numerical analysis performed with the simulation program which has been experimentally validated, it is shown that the number of edges of the rolling polygonal part can be a measure for the energy dissipation rather than the coefficient of friction. The appropriate slope angle has been found to be around 20 degree for roughness-separation as well as shape-separation of polygonal parts which have small number of edges. In additions, the vibratory motion applied to the inclined plane is able to cause mixed parts to be separated more effectively according to the shape or the roughness. Finally, a couple of parts separation methods based on the analysis results are presented, and are validated through the numerical simulation.