• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2006년도 추계학술대회
• /
• pp.173-179
• /
• 2006

In order to explain a U-shape pattern of stock returns, Fama and French(1988) suggested the state-space model consisting of I(1) permanent component and AR(1) stationary component. They concluded the autoregression coefficient induced from the state-space model follow the U-shape pattern and the U-shape pattern of stock returns was due to both negative autocorrelation in returns beyond a year and substantial mean-reversion in stock market prices. However, we found negative autocorrelation is induced under the assumption that permanent and stationary noise component are independent in the state-space model. In this paper, we derive the autoregression coefficient based on ARIMA process equivalent to the state-space model without the assumption of independency. Based on the estimated parameters, we investigate the pattern of the time-varying autoregression coefficient and conclude the autoregression coefficient from the state-space model of ARIMA(1,1,1) process does not follow a U-shape pattern, but has always positive sign. We applied this result on the data of 1 month retums for all NYSE stocks for the 1926-85 period from the Center for Research in Security Prices.

• 정보처리학회논문지B
• /
• 제12B권5호
• /
• pp.527-534
• /
• 2005

영상에 회전이나 크기 변형이 가해지면 영상을 구성하는 점들의 좌표값들이 변경되어 형태 기술 및 인식이 어렵게 된다. 그러나 영상을 구성하는 점들 간의 위치관계나 무게중심과의 위치 관계는 변하지 않는다. 따라서 x-y 좌표계로 기술되는 영상 공간의 점들을 회전 및 크기 변형에 불변하는 새로운 좌표계로 사상할 수 있다면, 형태 기술 및 인식의 문제는 보다 수월해진다. 본 논문에서는 영상 공간의 점들을 회전 및 크기 변형에 무관한 새로운 특징 공간으로 사상하여 형태를 기술하는 방법을 제안한다. 특징 공간을 나타내는 새로운 좌표계는 무게중심으로부터의 상대거리와 윤곽선 세그먼트 곡률을 두 축으로 하는 직교 좌표계이다. 상대거리는 윤곽선 상의 임의의 한 점이 무게중심에서 얼마나 멀리 벗어나 있는지를 나타내는 값이고, 윤곽선 세그먼트 곡률은 세그먼트의 굴곡도를 나타내는 값이다. 특징 공간에 사상된 점들의 형태 기술은 메쉬 특징을 통해 이루어진다. 실험을 통해 제안된 형태 기술 방법이 회전 및 크기 변형에 강건함을 확인하였다.

• 한국공간구조학회논문집
• /
• 제10권4호
• /
• pp.113-122
• /
• 2010

대공간 스페이스 프레임 구조물은 구조물의 목적 및 설계자의 의도와 함께 다양한 형상으로 구성될 수 있으며, 다양한 구조물 형식에 적용될 수 있다. 그러나 이러한 대공간 스페이스 프레임 구조물의 최적의 부재크기나 형상은 구조 엔지니어의 경험과 반복적인 해석 그리고 시행착오적인 방법 때문에 그 결정이 쉽지 않다. 따라서 본 논문에서는 설계자가 구조물의 최적 형상을 선택할 수 있는 방안을 제시하기 위해 먼저 타원형 및 볼트복합형과 같은 다양한 유형의 스페이스 프레임 구조물이 선정되며, 절점, 좌표 및 부재 생성을 위한 형상생성방법이 고려된다. 또한 스페이스 프레임 구조의 최적설계 절차에서 각 절점 좌표는 높이 변화나 링의 개수에 따라 변하게 되므로 최적설계 과정에서 절점파 부재의 자동생성기법이 적용된다. 다음으로 형상생성방법을 기반으로 한 형상생성모듈은 구조물의 최적화 단계에 앞서 설계자가 원하는 형상을 생성해주는 모듈이며, 최적화 단계에서는 해석 모듈과 최적화모듈이 연계된다. 마지막으로 예제 모델을 통해 형상생성방안 및 최적설계 방안의 효율성을 검토한다.

• 한국실내디자인학회논문집
• /
• 제25권2호
• /
• pp.41-49
• /
• 2016

The purpose of this study is to analyze the change and to compare to the difference of 'selective elements' and 'space-memory' focusing on the theory, 'selective attention' through the survey results. In this study, In this study, the lighting is considered a important factor in the change of 'selective elements'. this survey is to find the selective elements of participants and to measure the spatial sensitivity of respondents through 'self- test'. The analysis in this study is conducted by descriptive statistics, t-test and one way ANOVA by SPSS program 22. The results of this study are as following; Firstly, 'attention-element' could be classified with 4 types, 'shape', 'material', 'contrast' and 'combination'. 'shape' could divide into 'structure' and' furniture and object'. In case of 'material', it could section with 'pattern' and 'color'. Secondly, through the results of study, 'attention-element' is different each space during the day in detail. But we could know that 'shape' is the important element of the 'attention-elements' during the day through comparison of this result. That means users consider this as a important factor when they evaluate the space. Therefore, it is effective way designers to consider 'shape' as the first element when they want to conduct the special sensitivity of users in the space through planning. On the other hand, what selective elements of users are different by the lighting situation should be acknowledged by designers. And they should think the kinds of selective elements are more various when lighting turns on than turns off.. Thirdly, through the results such as the meaningful difference of space-memory of users according to the change of 'attention-elements', designers should judge about which kind of feeling of users to the space do you want lead in the design process. For the effective feedback between spaces and users to induce the same emotion of users, designers need to consider the unified design and the individual design both. Also, we will regard the differences in the users' emotion to the space according to the lighting situation when we design the space.

• Journal of Biosystems Engineering
• /
• 제30권5호
• /
• pp.268-273
• /
• 2005

This study was conducted to investigate the specificities of four fulcrum types for geo-statistical analysis of elevation within rice paddy field. In Korea, the spaces between inter-rows and between hills for rice transplanting are 30cm and 11cm to 14cm, respectively. So, the size and shape of fulcrum for field elevation measurement should be considered according to the inter-row and the hill spaces. Four kinds of fulcrum were chosen such as round-shape with 2.5cm diameter, circular-shape with 10cm diameter, 10cm (one third of inter-row space) by 24cm (double of hill space) rectangular-shape, and 20cm (two-thirds of inter-row space) by 24cm rectangular-shape. The resulting descriptive statistics couldn't determine the best fulcrum type to measure the rice paddy field elevation. But the results of geo-statistical analysis could determine the best fulcrum type. In the case of 10cm by 24cm rectangular-shape fulcrum, Nugget and range, meaning measurement error and/or noise, and limit of spatial connection, respectively, were minimum; Q value meaning weight of spatial structure and $r^2$ value were minimum, and residual sum of squares was minimum. It means that 10cm by 24 cm rectangular-shape fulcrum could best describe the rice paddy field elevation.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.503-505
• /
• 2008

The purpose of the current study is to examine the aerodynamic characteristics of two hypersonic vehicles in near space. One is derived from waverider shape, and the other from liftbody. The objective of this study are threefold. The first is to creat an computational database for hypersonic vehicle configurations. The second is to examine the effects of individual vehicle components on hypersonic configurations and to determine the differences in aerodynamic characteristics that result from integrating all vehicle components. The third objective is to evaluate the controllability of each of the fully integrated vehicles and the effectiveness of the control surface design. These objectives were accomplished using DSMC solutions and aerodynamic code developed in Northwestern Polytechnical University. The results are analyzed also in three sections. First, the results of the waverider shape and liftbody shape without integrated vehicle components are presented. Second, the results of adding aircraft components to the waverider shape and liftbody shape are presented. Finally, the aerodynamic characteristics of the fully integrated waverider-derived configuration and liftbody-derived configuration are examined and compared with those of the pure waverider shape and liftbody shape. Comparation between fully integrated waverider-derived configuration and liftbody-derived configuration are also presented in this paper.

• Structural Engineering and Mechanics
• /
• 제6권6호
• /
• pp.693-710
• /
• 1998

This paper concerns studies on the shape formation of post-tensioned and shaped steel domes. The post-tensioned and shaped steel domes, assembled initially at ground level in an essentially flat condition, are shaped to a curved space form and erected into the final position by means of a post-tensioning technique. Based on previous studies on this shape formation principle, three post-tensioned and shaped steel domes have been constructed. The results of the shape formation tests and finite element analyses are reported in this paper. It is found that the first two test domes did not furnish a part-spherical shape as predicted by finite element analyses, because the movements of some mechanisms were not controlled sufficiently. With a revised post-tensioning method, the third dome obtained the theoretical prediction. The test results of the three post-tensioned and shaped domes have shown that a necessary condition to form a desired space shape from a planar layout with low joint stiffnesses is that the movements of all the existing mechanisms must be effectively controlled as indicated by the finite element analysis. The extent of the maximum elastic deformation of a post-tensioned and shaped steel structure is determined by the strength of the top chords and their joints. However, due to the semi-rigid characteristic of the top chord joints, the finite element analyses cannot give a close prediction for the maximum elastic deformations of the post-tensioned and shaped steel domes. The results of the current studies can be helpful for the design and construction of this type of structure.

• 한국공간구조학회논문집
• /
• 제10권4호
• /
• pp.59-66
• /
• 2010

본 연구는 스페이스 트러스 구조물의 초기 형상을 결정하기 위해 밀도법을 이용한 위상최적화 기술을 고려하고자 한다. 대부분의 초기 형상설계는 다양한 최적화 방법을 활용하지 않고 설계자의 경험이나 시행착오적인 방법을 바탕으로 수행되고 있다. 이런 이유로 합리적이고 경제적인 최적화기술이 초기 형상설계에 도입되어야 한다. 따라서 본 연구에서는 스페이스 트러스 구조물을 대상으로 설계영역을 설정하고 위상최적화를 수행하여 최적의 재료분포를 찾은 뒤 크기최적화를 이용하여 최적부재 크기를 찾고자 한다. 이와 같이 밀도법을 이용한 위상 및 크기최적화를 병행하여 수행할 경우 합리적인 스페이스 트러스 구조물의 초기 형상을 도출할 수 있다.

• 한국의상디자인학회지
• /
• 제22권4호
• /
• pp.93-104
• /
• 2020

This paper focuses on the spatial changes that create a three-dimensional or deep feeling on the surface of a scarf centering on the cube shape. Through this, consumers with various tastes were able to satisfy their image presentation. The cube form has simplicity and order and is likely to be used as a formative object. The cube shapes can be expressed in various forms through visual and perceptual spatial changes by presenting various shape changes based on the viewpoint of the two-dimensional silk surface, that is, by changing the eyes' position and orientation. Various visual theorists' discussions about cube-shaped visual changes were discussed. In addition, the three-dimensional spatial illusion caused by the shape and color of Victor Bazaarelli's cube was examined. The cube shape was printed silk surfaces to give a three-dimensional sense of space on a two-dimensional scarf design using the size change, the difference in the length of the line, and the color change. As such, the cube shape has infinite possibilities as a method that can express three-dimensional depth and space on the flat surface of a scarf. Therefore, it is hoped that this study will be applied to various aspects as the basic data for the scarf design that expresses the spatial changes in the form of cubes.

• 한국실내디자인학회논문집
• /
• 제18권5호
• /
• pp.156-163
• /
• 2009

Retail space itself could be one of the marketing strategies, through creating space, and communicating brand identity. Especially for innovative products, such as mobile technology products, store is not just to sell products but to provide experiences so that users can fudge usefulness of products and reduce uncertainties to adopt the products. The purpose of this study is to investigate how environmental features and physical artifacts contribute to promote experiences of innovative products in stores and how physical environment help to establish brand identity. For this study, site visits, observation, and literature review were conducted. For case studies, three retail spaces (Apple, Iriver, Sony) and one service space(TTL) were selected. Compared to the service space, three retail spaces have more transparent and open store front design characteristics. For the experiences of shoppers, products displayed in a radial shape, round shape, column shape, and around peripherals of the stores. A service oriented space, TTL zone is differentiated from three retail spaces in terms of layout, store front design, and experience areas. Compared to the traditional stores selling innovative products, the case stores showed more warm atmosphere using various shape, wood materials, lighting fixtures and furniture.