• Journal of the Optical Society of Korea
• /
• v.13 no.4
• /
• pp.464-467
• /
• 2009

The grating projection method with phase-shifting technique is very useful in measuring the 3-dimensional (3D) shape with high accuracy and speed. In this work, we have developed an ultra high-speed digital laser grating projection system using a high-power laser diode and a highsensitivity CMOS camera. With our system, the optical measurement required to find out the profile of a 3D object could be carried out within 2.6 ms, which is a significant ($\sim$10 times) improvement compared with those of the previous studies.

• Transactions of Materials Processing
• /
• v.9 no.6
• /
• pp.574-581
• /
• 2000

A vertically-walled auto-body part is one of the most difficult stamping parts because of angle change, wall curl, and twisting of the blank after springback as well as fracture and wrinkle. In this study, computational simulations of the vertically-walled auto-body part are carried out focusing on angle change, wall curl, and twisting after springback. Binderwrap blank shape is used in forming analysis for precise initial contacts between punch and blank. An adaptive mesh method is used in springback analysis for precise calculation of bending moments. In springback analysis, the differences of 2 and 3 dimensional analysis are compared and the effects of blank holdig force and friction coefficient are evaluated. In order to verify the validity of simulation results, they are compared with measured ones. The predicted thickness distribution and formed shape are agreed well with those of the measurement. The Predicted springback amount is less than that of the measurement.

• Journal of Powder Materials
• /
• v.9 no.4
• /
• pp.251-260
• /
• 2002

In the viscosity measurement of PIM feedstock, slip correction methods require a number of experiments and produce a high level of error. In this study, a rotational rheometer with a parallel-discs configuration having different surface roughness was tried to minimize the effect of the slip phenomenon. Disc surface was prepared in 3 different roughness conditions - a smooth and 2 roughened surfaces. Results with the roughened surfaces were compared with the results obtained with a slip correction method. Relationship between powder characteristics such as size and shape and a surface roughness of the disc was examined for feedstock of 4 different powders with a same binder. As results, the effect of the slip phenomenon could be sufficiently minimized on the roughened surface in most cases. However, the effect of the slip phenomenon could not be sufficiently minimized for feedstock of a round-particular-shape powder and in the case of very narrow gap size.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.53.2-53
• /
• 2001

The Non-Contact Optical Sensor using the Hologram Laser for CD Pickup was developed to measure a shape of transparent objects and shown a good performance. Therefore the problems caused by the contact sensor are solved by using the Non-Contact Sensor. The Non-Contact Sensor has to move toward the objects and obtain the Focus Error Signal to measure a position of transparent objects. However, if the distance between the sensor and the object is shorter than the working distance of the objective lens, the sensor will be collided against the objects. In this paper we proposed a new algorithm to estimate the start position of the Focus Error Signal to solve the problems of collision between the sensor and the objects. In addition, we verified that the algorithm is free from the collision in the real time measurement.

• International Journal of Highway Engineering
• /
• v.15 no.6
• /
• pp.33-39
• /
• 2013

PURPOSES : This research investigates traffic noise characteristics as change the transverse rumble strips shape from rectangular to cylinder at toll plaza of highway. METHODS : The traffic noise was investigated at two different places at toll plaza of highway. One is modified grooving, another is employed cylinder shape of TRS instead of rectangular shape of TRS. A measurement of traffic noise was conducted at same location and time period. The traffic volume information was gotten from office of highway office and vehicle speed was measured by speed measuring device. The traffic noise measurement was conducted from 13:00 to 23:00 and by pass-by method. Also, the traffic noise was measured behind noise barrier. Various distance from noise barrier(7.5m, 30m, 50m) and different heights(1.2m, 3m, and 5m) were parameter for measurement of traffic noise in this study. RESULTS : The class 1 vehicle was contributed from traffic volume which was increased 1,500. However, the distribution of traffic speed didn't change compare to previous investigated period. From this study, It was found that the external traffic noise was changed as function of geometric shape of TRS. The external noise from modified grooving was less than 1.2dB(A) of the current TRS. A difference of traffic noise was 20dB(A) before and after barrier. It came from a noise barrier effect as reduction of traffic noise. According to investigate a traffic noise distribution near barrier, there is similar noise characteristic as function of height at 7.5m distance from noise barrier. Also, There is no different traffic noise between 30m and 50m from source of the noise of sound barrier. CONCLUSIONS : Based on this traffic noise investigation result, there is a clear characteristic difference as changed TRS shape. The traffic noise was reduced by changed TRS shape. Specially, traffic noise was decreased although the traffic volume was increase for same investigation time and period. It is implied that cylinder type of TRS significantly reduces the traffic noise. The specification of various TRS will be studied in the future.

• Journal of the Korean Society of Costume
• /
• v.57 no.5 s.114
• /
• pp.151-165
• /
• 2007

Appearance matters in society today. Women want to feel good and look their best. They do make-up, wear garment and accessory for their good looking. Doing make-up, we have to know how we are look and to consider face shape. But it is difficult to recognize face shape. Because there is no standard face shape of adult women of quantitative analysis. The purpose of this study was to offer standard face shape of adult women in Korea. Furthermore, the study was to determine and differentiate face shape of each age group to set the basic data for the Korean beauty industry. In this study, photographs of 600 Korean women, age between $20{\sim}50's$, were indirectly measured in Venus face2D program. The measurements were analyzed by statistical methods. As a result of basic statistical data analysis, the average lengths of face were 196mm, lengths of forehead-hairline between eyebrows were 62mm, lengths of eyebrow between noses were 68mm, length of nose between chin were 66mm, and width of face were 150mm. By comparing to each age group's face using ANOVA, the statistically noticeable differences were found in measurements.

• Journal of Fashion Business
• /
• v.8 no.1
• /
• pp.76-90
• /
• 2004

The purpose of this study was to classify women's face types and to analyze the measurement of face types. For study, 180 adult women(aged between 20 and 29) in Pusan and Ulsan area was sampled to be measured for facial types. Data were analyzed by Frequencies, Means, Duncan's Multiple Range Test, Distinction analysis. The major results were as followed. Women's face types were classified by 6 types and there were round shape(29.4%), oblong shape(18.9%), inverted triangle shape(16.1%), square shape(13.9%), egg shape(11.7%), diamond shape(10.0%) in the subject. Phyiognomic facial height was 182.38mm, the upper face length was 59.82mm, the middle face length 60.82mm, the lower face length 61.76mm, and the index of face length to face breadth was 1.35. The face width was 134.90mm, interocular distance 34.75mm, the nose width 33.93mm, and mouth width was 43.87mm. And also, differences from those measurements like forehead breadth, face length/bizygion breadth, forehead slopper, bigonion breadth, bignathion breadth, bignathion slopper.

• The Korean Journal of Applied Statistics
• /
• v.32 no.1
• /
• pp.15-27
• /
• 2019

The reliability of the data means the overall consistency of the measurement results. Methods for evaluating reliability have been continuously studied because it affects the results of the statistical analysis. Cronbach's ${\alpha}$ coefficient or intraclass correlation coefficient is used for reliability evaluation; however, these measures cannot be applied to data consisting of three-dimensional coordinates to represent an object. In this study, we propose a measure to evaluate the reliability of three dimensional shapes based on statistical shape analysis that is made possible by extracting the shape information from the measured three dimensional coordinates and decomposing the shape variation.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.122-129
• /
• 2020

The circumference of the body is not only an indicator in order to buy clothes in our life but an important factor which can increase the effectiveness healing properly after figuring out the shape of body in a hospital. There are several measurement tools and methods so as to know this, however, it spends a lot of time because of the method measured by hand for accurate identification, compared to the modern advanced societies. Also, the current equipments for automatic body scanning are not easy to use due to their big volume or high price generally. In this papers, OpenPose model which is a deep learning-based Skeleton Tracking is used in order to solve the problems previous methods have and for ease of application. It was researched to find joints and an approximation by applying the data of the deep camera via reference data of the measurement parts provided by the hospitals and to develop a program which is able to measure the circumference of the body lighter and easier by utilizing the elliptical circumference formula.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.11 s.158
• /
• pp.1598-1607
• /
• 2006

The purpose of this study was to analyze the proportion of gathered skirts using a three-dimensional measurement system. And in this experiment, we have attempted to accumulate three-dimensional data of wearing model and find out adequate methods for analyzing shape of clothes. The experimental design consists of two factorial designs. We established three different kinds of fabrics, ratio of gathers. The measurement tool for three-dimensional model was whole body 3D scanner(Exima-WBS2H). Analysis program used in experiment is RapidForm 2004 PP1 and Pattern Design 2000. Data analysis utilizes SPSS WIN 10.0 Package. As the results show, there were different effect of gather and proportion of shapes among the measurements of width, thickness and areas made by different lines of vision in cross-sectional silhouette. And there were difference shapes of section area at each part of gathered skirts between vertical-outline silhouette and vortical-plane silhouette made by gathering conditions. And also the cross-sectional silhouettes and vertical silhouettes were related to shape of clothes.