• Steel and Composite Structures
• /
• 제31권4호
• /
• pp.397-408
• /
• 2019

In this paper, a geometrically nonlinear meshfree analysis of 3D various forms of shell structures using the double director shell theory with finite rotations is proposed. This theory is introduced in the present method to remove the shear correction factor and to improve the accuracy of transverse shear stresses with the consideration of rotational degrees of freedom.The present meshfree method is based on the radial point interpolation method (RPIM) which is employed for the construction of shape functions for a set of nodes distributed in a problem domain. Discrete system of geometrically nonlinear equilibrium equations solved with the Newton-Raphson method is obtained by incorporating these interpolations into the weak form. The accuracy of the proposed method is examined by comparing the present results with the accurate ones available in the literature and good agreements are found.

• Structural Engineering and Mechanics
• /
• 제88권3호
• /
• pp.201-208
• /
• 2023

In this work, the effect of the correction fibers direction on the efficiency of repairing damaged composite plates was highlighted. The composite plates studied in this work consist of eight layers of graphite/epoxy, while the patch used in this repair consists of four layers of the same type. The results obtained in this work, whether with regard to the experimental or analytical side, showed that the fibers orientation affects the repair efficiency, so the closer the angle of fibers inclination is to the tensile strength direction, the performance of the composite material is ideal. Hence, we conclude that the composite materials with longitudinal fibers (Parallel to tensile strength) is the most powerful and efficient material in performance.

• 한국안광학회지
• /
• 제19권3호
• /
• pp.383-387
• /
• 2014

목적: 동공크기가 달라질 때 각막의 고유한 형태가 굴절검사 완전교정값에 미치는 영향을 조사하였다. 방법: 평균연령 $23.33{\pm}1.78$세의 30명(60안)을 대상으로 검사실 조도 760 lx와 2 lx에서 각각 자각적굴절검사를 실시하여 단안 완전교정하고, 동공의 크기를 측정하였다. 그리고 각막지형을 측정한 후 peak data를 이용하여 각막지형의 변화를 분석하였다. 결과: 검사실 조도 760 lx에서 측정된 동공크기는 3.74~4.00 mm, 2 lx에서는 5.52~5.90 mm로 측정되었다. 760 lx에서 2 lx로 조도가 변화될 때 (-)구면굴절력이 증가한 경우는 17안(28.3%), (+)구면굴절력이 증가한 경우는 10안(16.7%), (-)원주굴절력이 증가한 경우는 17안(28.8%), (-)원주굴절력이 감소한 경우는 9안(15.3%), 그리고 난시축이 변화한 경우는 36안(62.1%)이었다. 각막지형측정에서 나타난 peak data 분석 결과 각막 주경선의 변화는 4가지 형태로 분류되었다. 결론: 동공확대에 따른 각막굴절면 확장은 각막의 고유한 형태로 인해 자각적굴절 검사값을 변화시키는 요인으로 작용하므로, 자각적굴절검사는 주된 생활환경에 맞는 조도조건에서 실시하여야 한다.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2246-2253
• /
• 2011

This paper presents the error correction method of magnetic position sensor using recursive least square method (RLSM) with forgetting factor. Magnetic position sensor is proposed for linear position detection of the linear motor which has tooth shape stator, consists of permanent magnet, iron core and linear hall sensor, and generates sine and cosine waveforms according to the movement of the mover of the linear motor. From the output of magnetic position sensor, the position of the linear motor can be detected using arc-tan function. But the variation of the air gap between magnetic position sensor and the stator and the error in manufacturing process can cause the variation in offset, phase and amplitude of the generated waveforms when the linear motor moves. These variations in sine and cosine waveforms are changed according to the current linear motor position, and it is very difficult to compensate the errors using constant value. In this paper, the generated sine and cosine waveforms from the magnetic position sensor are compensated on-line using the RLSM with forgetting factor. And the speed observer is introduced to reduce the effect of uncompensated harmonic component. The approaches are verified by some simulations and experiments.

• 대한기계학회논문집
• /
• 제16권9호
• /
• pp.1681-1690
• /
• 1992

본 연구에서는 유리섬유강화 플라스틱복합재료를 준비하여 이 재료의 섬유방 향에 따른 파괴인성 및 피로 균열성장거동을 평가하였다.

• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.979-983
• /
• 2007

본 논문에서는 액정용 실드 케이스 (Shield Case)의 스트립 레이아웃 도 작성하였다. 프레스 금형에 있어서 스트립 레이아웃 도는 제품 양산을 결정하는 중요 요인이다. 장착되는 다른 부품과의 간섭요인을 용이하게 수정하기 위하여 3D CAD/CAM 시스템을 적용하였다. 블랭크 레이아웃을 최적화하고 광폭배열로 스트립 레이아웃 하여 재료 이용률을 60.17%로 향상시켰다. 또한 얇은 소재두께로 인해 변형 발생이 예상되는 노칭부위에 집중적으로 비딩공정을 추가하여 제품의 평탄도를 요구사항에 맞게 적용하였다. 사용된 3D CAD/CAM 소프트웨어는 Unigraphics NX 3.0이며 12개 공정으로 스트립 레이아웃 도를 작성하였다.

• Nuclear Engineering and Technology
• /
• 제21권4호
• /
• pp.294-301
• /
• 1989

상하부 2개의 노외계측기, 노입구관 온도 및 제어봉 위치 신호를 이용하여 상세한 축방향 출력분포를 계산할 수 있는 APDMS프로그램을 개발하였다. 상하부 2개의 노외계측기 신호가 제어봉 위치에 의하여 결정된 제어봉 간섭계수와 노입구관 온도에 따른 온도 간섭계수에 대하여 보정된 후 노심 주변출력을 얻기 위하여 보정된 노외계측기 신호에 shape annealing matrix가 적용되었다. 노심의 상하부 경계에서의 출력을 얻기 위해서는 평균 노심출력과 주변출력과의 선형적 관계를 이용한 노심 상하부의 평균출력에 경계점 출력보정계수가 적용되었다. 축방향 출력분포가 2개의 노외계측기에 의해 계산된 상하부 평균 노심출력, 상하부 경계면에서의 출력 및 미리 계산된 노심의 중심 위치에서의 출력을 이용하여 spline approximation에 의하여 계산되었다. 연소도, 출력준위, 제어봉 위치 및 axial offset의 변화에도 불구하고 고리 3호기 4주기에 대하여 BOXER 코드와 APDMS 프로그램에 의해 계산된 축방향 출력분포의 비교는 5% root mean square 오차내에서 일치함을 보여 주었다.

• 동의생리병리학회지
• /
• 제19권4호
• /
• pp.865-871
• /
• 2005

The Wenbing tiaobian(온병조변) is the first systematic disease monograph on warm factor disease(온병), written by Wu Jutong(오국통). It was most influenced by the Linzheng zhinan yian(임증지남의안), which was a book of gathering medical case records of Ye tianshi(엽천사). Therefore, there are plenty of quotations from this book in the Wenbing tiaobian. This study investigates the quotations from Linzheng zhinan yian, especially focusing on the way of transformation and correction of the original medical case records on the warm factor disease. The results are as follows: About 104 of 265 provisions in the Wenbing tiaobian were directly quoted from the Linzheng zhinan yian. The provisions quoted from Ye's case records were rearranged according to the categories of the triple burners pattern differentiation(삼초변증) and the causes of warm factor disease. And eve case record was transformed into more general descriptive form in order to put it into the book. For example, the specific figures, and some patients' peculiar symptoms, causes, sex and disease names were omitted. On the other hand, the tongue moss, pulse shape and some symptoms, which were necessary for differentiating patterns, were added. In the case of the formula, some formulas originated from Ye's case records were named newly. And the dose of each herb consisting a formula was determined, and therapeutic principle, taking method and detailed explanation was added to every formula.

• Steel and Composite Structures
• /
• 제28권5호
• /
• pp.589-606
• /
• 2018

The previous studies reflected the significant effect of neutral-axis position and coupling of in-plane and out-of-plane displacements on behavior of functionally graded (FG) nanobeams. In thin FG beam, this coupling can be eliminated by a proper choice of the reference axis. In shear deformable FG nanobeam, not only this coupling can't be eliminated but also the position of neutral-axis is dependent on through-thickness distribution of shear strain. For the first time, in this paper it is avoided to guess a shear strain shape function and the exact shape function and consequently the exact position of neutral axis for arbitrary gradation of higher order nanobeam are obtained. This paper presents new methodology based on differential transform and collocation methods to solve coupled partial differential equations of motion without any simplifications. Using exact position of neutral axis and higher order beam kinematics as well as satisfying equilibrium equations and traction-free conditions without shear correction factor requirement yields to better results in comparison to the previously published results in literature. The classical rule of mixture and Mori-Tanaka homogenization scheme are considered. The Eringen's nonlocal continuum theory is applied to capture the small scale effects. For the first time, the dependency of exact position of neutral axis on length to thickness ratio is investigated. The effects of small scale, length to thickness ratio, Poisson's ratio, inhomogeneity of materials and various end conditions on vibration and buckling of local and nonlocal FG beams are investigated. Moreover, the effect of axial load on natural frequencies of the first modes is examined. After degeneration of the governing equations, the exact new formulas for homogeneous nanobeams are computed.

• 한국정밀공학회지
• /
• 제3권3호
• /
• pp.40-71
• /
• 1986

By developing a computer program for the systematic design of worm gears, the design formulae and tables of AGMA, JGMA, BS and DIN are analized and compared. The computer program can be used on micro-computers. According to the input data of the reduction ratio, the center distance. the driving torque and the material as design parameters, the program calculate the most efficient worm gear dimension. The variation of the design parameters and other empirical coefficients in case of resulting an inadequate design gear dimension can be easily modified throuth the way of interactive method between the user and the monitoring system of computer. A proposal of the standardization of worm gears was made in which a standard module according to the DIN 323 standard series number was applied. For the more exact and effective calculation of the stress concentration and the deformation of gear teeth, a computer program using the boundary element method is also developed. Even the strength of the special gear shape such as Niemann's "Cavex" gear can be calculated in a short CPU-time. The most effort of this study has been layed on the developing a computer program for the correction of a tooth profile and face width which is most important design factor for an exact and wide teeth contacts under loads, especially by great and wide gears. For this purpose were investigated the tooth stiffness, the mesh interferences and the kinematics and the dynamics of gear mesh. The deflection and the deformation of the gear shaft due to the loads acting on gear and shaft were aslo considered. Some examples have shown the sufficient good status of teeth contact in which the correction of the tooth profile and face width were accomplished due to the calculated results.d results.