• Journal of the Korean Institute of Navigation
• /
• v.9 no.1
• /
• pp.95-109
• /
• 1985

It has been generally known that the chattering of an AC electromagnetic contactor due to the fluctuation of attracting force is the primary cause of its abrasion and noise. To reduce this chattering effect, an AC electromagnetic contactor is mostly fitted with a shading coil which works the role to make difference in phases of two distinct components of attracting force. The theoretical interpretation of an AC electromagnetic contactor with shading coil and the equation of its attracting force per unit wattage consumed have already been proposed, however, few explications so far have been made on the determination of optimal circuit constants of shading coil. In this paper, the auther constructs a circuit model of an AC electromagnetic contactor with shading coil which is based on the theoretical interpretation of shading coil examined to be valid by experiments under some assumptions, and defines the equation of attracting force without chattering per unit wattage consumed as a performance function for determining the optimal circuit constants of shading coil. And then, the optimal circuit constants maximizing the performance function are determined by means of computer simulation founded on the above circuit model and the characteristics of those circuit constants are examined with special attention to the coupling coefficient.

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.199-202
• /
• 2002

This paper introduces the near field shading beamformer using widely known Chebyshev and Hanning window in the field of digital signal processing. The proposed shading beamformer improves the estimation of range as well as azimuth angle of targe residing in near field. A series of sensor weighting values are calculated from the FFT operation of given shading functions in time domain. This paper verifies the performance of the focused beamformer having the proposed shading sensor weights which are used to detect the range of target. Throughout computer simulations this paper exploits the performance improvement of the proposed shading beamformer as varying the frequency band of the received radiated signal along the non-uniform array.

• KIEAE Journal
• /
• v.16 no.5
• /
• pp.65-71
• /
• 2016

Purpose : The solar shading device carries out roles in a reduction of the cooling load and an improvement of the thermal comfort of occupants by adjusting incident solar radiation. In addition, The shading device enhances the visual sensation comfort by controlling the optical properties. In order to improve building performance and comfort of occupancy, interests in application of the shading devices are getting increasing. This study investigated the application and effectiveness of the external shading device design using statistical analysis. The outcome of this paper could be utilized for the realization of status quo and for an estimation of effectiveness of the shading device Method : The period of data gathering was between 2003 and 2014 and total 459 cases of practical building project were investigated. Firstly, this study defined qualification of the shading devices; the shading device should have minimum protruding lengths of 150mm to outside and have the function of shading control. This paper investigated application rate of the shading device in real project, regional rate of application, annual change of application, materials and types. Result : The statistical analysis showed that the application rate of shading devices was 25.7% in total 459 building design projects. The application rate in central and southern region was 25.3% and 27.0% respectively. Meanwhile, Jeju region showed 22.2%, which was the lowest rate although this area needs more shading devices. The application number of the shading device was the smallest in 2007, but the rate gradually increased after that. The applications was the largest in 2014 due to growing interest of the shading devices in the building.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.7
• /
• pp.350-356
• /
• 2008

In this paper, we propose shading functions to the appropriate focused beamforming for near-field target estimation. This near field shading functions are based on Chebychev and Manning windows. In order to obtain the optimum sensor weighting values with the help of the proposed shading technique, we assume that the sensor positions associated to the non-uniformly distributed array are precisely known. We calculate a series of sensor weighting values from the FFT operation of given shading functions in time domain. By applying the shading weights on the sensor array, we can see that the level of sidelobe becomes diminished and the performance of estimating range and azimuth gets improved. In addition, we propose a non-uniform structure in terms of frequency bands, which may minimize the attenuation of incoming signals.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.22 no.2
• /
• pp.1-12
• /
• 2019

Open space planners and designers should consider scientific and quantified functions of trees when they have to locate where to plant the tree. However, until now, most planners and designers could not consider them because of lack of tool for considering scientific and quantitative tree functions. This study introduces a tree location supporting tool which focuses on the multi-objective including scientific function using ACO (Ant colony optimization). We choose shading effect (scientific function), shielding, and openness as objectives for test application. The results show that when the user give a high weight to a particular objective, they can obtain the optimal results with high value of that objective. When we allocate higher weight for the shading effect, the tree plans provide larger shadow value. Even when compared with current tree plan, the study result has a larger shading effect plan. This result will reduce incident radiation to the ground and make thermal friendly open space in the summer. If planners and designers utilize this tool and control the objectives, they would get diverse optimal tree plans and it will allow them to make use of the many environmental benefits from trees.

• Journal of Bio-Environment Control
• /
• v.29 no.3
• /
• pp.306-312
• /
• 2020

This study was conducted to investigate cucumber plants response to greenhouse environments by solar shading in greenhouse in the summer. In order to estimate heat stress reduction of cucumber plants by solar shading in greenhouse, we measured and analyzed physiological conditions of cucumber plants, such as leaf temperature, leaf-air temperature, rubisco maximum carboxylation rate, maximum electron transport rate, thermal breakdown, light leaf respiration, etc. Shading levels were 90% mobile shading of full sunlight, 40% mobile shading of full sunlight and no shading(full sunlight). The 90% shading screen was operated when the external solar radiation is greater than 650 W·m^-2. Air temperature, solar radiation, leaf temperature, leaf-air temperature and light leaf respiration in the 90% shading of full sunlight was lower than those of 40% shading and no shading. Rubisco maximum carboxylation rate, arrhenius function value and light leaf respiration of the 90% shading were significantly lower than those of 40% shading and no shading. The thermal breakdown, high temperature inhibition, of 90% shading was significantly higher than that of 40% shading and no shading. Therefore, these results suggest that 90% mobile shading made a less stressful growth environment for cucumber crops.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.1
• /
• pp.114-118
• /
• 2022

The photovoltaic system is affected by various conditions such as temperature and irradiance. Because non-uniform irradiation and partial shading conditions affect the entire string of cells connected in series, a bypass diode is used to bypass the current flow normally. In order to find the maximum power point in partial shade conditions, it is necessary to estimate various methods of maximum power point tracking. In this paper, the hybrid method of MPPT using Lambert W function and perturbation & observation algorithm is proposed under partial shading conditions. The simulation results are obtained using MATLAB/Simulink and shows the improvement of the accuracy of MPPT.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.3
• /
• pp.189-193
• /
• 2001

Critical cell density (CCD), the maximum cell concentration without mutual shading in algal cultures, can be used as a new operating parameter for high-density algal cultures and for the application of the flashing light effect on illuminated algal cultures. CCD is a function of average cell volume and light illumination area. The CCD is thus proposed as an index of estimation of mutual shading in algal cultures. Where cell densities are below the CCD, all the cells in photobioreactors can undergo photosysnthesis at their maximum rate. At cell densities over CCD, mutual shading will occur and some cells in the illumination chamber cannot grow photoautotrophically. When the cell concentration is higher than the CCD, specific oxygen production rates under flashing light were higher than those under continuous light. The CCD was found to be a useful engineering parameter for the application of flashing light, particularly in high-density algal cultures.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.3
• /
• pp.104-117
• /
• 1998

Rising concern about climate change has evoked interest in the potential for urban vegetation to help reduce the level of atmospheric CO\sub 2\, a major heat-trapping gas. This study quantified the functio of home energy savings and carbon emission reduction by shading, evapotranspiration and windspeed reduction of urban vegetatioin in Chuncheon. Tree and shrub cover averaged approximately 13% in residential land. The effects of shading, evapotranspiration and windspeed reduction annually saved heating energy by 2.2% and cooling energy by 8.8%. The heating and cooling energy savings reduced carbon emissions by 3.0% annually. These avoided emissions equaled the amount of carbon emitted annually from fossil fuel consumption by a population of about 1,230. Carbon emission reduction per residential building was 55kg for detached buildings and 872 kg for multifamily buildings. Urban vegetation annually decreased heating and cooling energy cost by ￦1.1 billions, which were equivalent to annual savings of ￦10,000 savings and carbon emission reduction due to tree plantings in the wrong locations, while windspeed reduction had a great effect. Plantings fo large trees close to the west and east wall of buildings, full tree plantings on the north, and avoidance of shade-tree plantings or selection of solar-friendlytrees on the south were recommended to improve the function of building energy savings and carbon emission reduction by urban vegetation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.3
• /
• pp.39-51
• /
• 2008

This study focuses on the reconstruction of buffer greens which were installed to reduce environmental effects on roadsides constructed in the 1980s, in order to supplement various urban green functions. The subjects were buffer greens installed along the Songpadaero and Nambusunwhanro in Songpa-gu. Planting was suggesting to strengthen the buffer, landscape, shading and ecological function according to the use of the buffer green surroundings. The surroundings of the green axis subjects are high-rise apartment areas, neighboring commercial areas, commercial working areas, transportation facility areas, urban support facility areas, schools, parks, etc. However, the structure of the buffer greens were uniformed with Plantanus occidentalis and Ginkgo biloba and Zelkova serrata in the canopy layer and with Forsythia koreana and Ligustrum obtusifoliumin the shrub layer in lineal or alternate order, functioning only as buffer space. Therefore, the buffer greens need to be reconstructed， supplementing various functions according to land use, in order to improve the pedestrian walk area in terms of landscape and use of greens. In line with that, the planting improvement plans according to the land use patterns, and physical and ecological structure were classified into buffer and landscape, landscape and buffer, buffer and shading, and buffer and ecological function. In addition, improving planting function, species and facilities are suggested.