• Restorative Dentistry and Endodontics
• /
• v.35 no.1
• /
• pp.40-50
• /
• 2010

This study evaluated the efficacy of an office bleaching gel (RemeWhite, Remedent Inc., Deurle, Belgium) containing 30% hydrogen peroxide. 31 volunteers were recieved office bleaching with the RemeWhite for 3 times at one visit, total 2 visits. As control group, the same gel in which hydrogen peroxide was not included was applied to 31 volunteers with the same protocol. The shade change (${\Delta}E^*$, color difference) of 12 anterior teeth was measured using Colorimerter and Vitapan classical shade guide. The shade change of overall teeth in the experimental group was significantly greater than that in the control group which was measured using Colorimeter. There was also a significant difference between baseline and 14 weeks or 26 weeks though color rebounding phenomenon occurred as time went by. Small shade change difference can be measured accurately using Colorimeter than using Vitapan classical shade guide.

• Journal of Bio-Environment Control
• /
• v.15 no.4
• /
• pp.406-411
• /
• 2006

New Guinea impatiens (Impatiens hawkeri) shows very sensitive responses to different light conditions. Due to these phenomena, testers of DUS (distinctness, uniformity and stability) for granting plant variety protection right often have problems distinguishing genetic or physiological differences. New Guinea impatiens 'Fishlimp 149' was grown under several light intensities in a rain-sheltered vinyl house to observe differences of plant growth and flowering. As compared with the control (avg. $1,010{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$), treatments of shade-1 (avg. $599{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) and shade-2 (avg. $88{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) showed increased plant height, plant width, leaf size and pedicel length. On the contrary, these growth parameters decreased in shade-3 (avg. $30{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) with the lowest light intensity. Shade-1 treatment enhanced flower characteristics such as flower diameter, upper petal width, side petal width and lower petal length. However, these characteristics were suppressed by lower light intensities than that in shade-1. Anthocyanin contents of shoot, leaf and pedicel decreased with increasing shading, but that of flower petal was the greatest of the shade-1 treatment. Shade-1 treatment showed the greatest Hunter a value analyzed by a colorimeter, and L and b values increased with increasing shading. Shade-1 treatment seemed to be provided the most proper light condition for DUS test of New Guinea impatiens. Additionally, anthocyanin accumulation on New Guinea impatiens during DUS test was due to not genetic differences but physiological phenomenon.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.4
• /
• pp.466-477
• /
• 2005

Statement of problem : Problem of matching the appearance of porcelain restorations with the patient's natural dentition has always been a concern to dental clinicians. Recently, demands for esthetics, even in restorations requiring strength, has brought a revolution to dentistry and increased use of zirconia. Among the various factors, shade and translucency or the core can significantly affect the overall esthetics of the restoration and should be considered when selecting an all-ceramic system. Purpose : The purpose of this study was to spectrophotometrically evaluate the influence of different zirconia systems and core thickness on the final shade of all-ceramic restorations using the CIEL$^*a^*b^*$ system. Material and Methods: Core specimens (n : 20 per group) of In-Ceram Alumina, In-Ceram Zirconia, Digident CAD/CAM Zirconia, Cercon Zirconia were fabricated 20mm in diameter. 10 specimens of each group were fabricated at core thickness of 0.5mm and 0.7mm. These core specimens were veneered with shade Al & A3 porcelain of the recommended manufacturer. CIEL$^*a^*b^*$ coordinates were recorded for each specimen with a spectrophotometer (Model CM-2600d, Minolta, Japan). Color differences were calculated using the equation ${\Delta}E^*=[({\Delta}L^*)^2+({\Delta}a^*)^2+({\Delta}b^*)^2]^{\frac{1}{2}}$. Results : 1. Specimens of core thickness 0.5mm and 0.7mm did not exhibit clinically perceived color difference. 2. Regarding shade reproducibility, In-Ceram Alumina and In-Ceram Zirconia showed significant difference within each group. 3. Cercon Zirconia group showed the highest $L^*$ value and Digident Zirconia group showed lowest $a^*$ & $b^*$ value. 4. Generally the shade difference between materials was higher in the A3 shade group than in the Al shade group. Conclusion: Within the limitations of this study, there was no color difference after increase in core thickness and every all-ceramic system has color characteristics that clinicians have to consider when selecting materials. Also, manufacturers of different porcelain systems must make every effort to achieve color reproducibility.

• Food Science of Animal Resources
• /
• v.32 no.6
• /
• pp.796-802
• /
• 2012

This study was conducted in order to investigate the effect of different drying methods on free amino acids and dipeptide contents, Warner-Bratzler shear force and sensory property of beef jerky products. The drying methods used for this study were sun-drying, shade-drying and hot air-drying methods. The sun-dried beef jerky had the highest free amino acids (277.45 mg/100 g) followed by shade-dried (206.43 mg/100 g) and hot air-dried (111.88 mg/100 g) ones, whereas the amount of dipeptides were the highest in the shade-dried beef jerky followed by sun-dried and hot air-dried ones. The fatty acid composition of the beef jerky was not shown any difference among the beef jerkies with 3 different drying methods. The color $L^*$-value of the beef jerky was lower in the hot-air dried, while the $a^*$-value was higher in the sun-dried one. The shade-dried jerky showed a lower $b^*$-value. The shear force of beef jerky was lower when it was either sun-dried or shade-dried than when it was hot air-dried. Sensory evaluation revealed that hot air-dried beef jerky scored lower than the sun-dried and shade-dried ones (p<0.05). Therefore, using either the sun drying or shade drying methods is more desirable than using the hot air drying method when manufacturing beef jerky for superior physicochemical qualities.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.5
• /
• pp.587-598
• /
• 2005

Statement of problem: Ceramic restorations should be made of porcelain layers of different opacity, shade, and thickness in order to provide a natural appearance. Lithium disilicate glass-ceramic system has superior color reproducibility, because it uses the ceramic ingot which is similar to teeth shade and uses the staining technique and layering technique. However, staining technique has a fault of discoloration. Also, porcelain is divided core and dentin layer, it is not enough to study about the influence of porcelain layer thickness and shade on the shade of ceramic restorations. Purpose: The purpose of this study was to evaluate the influence of porcelain layer thickness and color on the final shade of ceramic restorations. Materials and method: The CIE $L^*a^*b^*$(CIELAB) values of 72 assembled specimens, each consisting of 3 discs (enamel porcelain 0.2 mm/dentin porcelain -1.2, 0.9, 0.7, 0.5 or 0.3 mm/ceramic core -0.3, 0.5, 0.7, 0.9 or 1.2 mm, diameter is 1.0 mm) were evaluated with a spectrophotometer (Model Chromaview 300, Spectron Tech Co, Korea) for the shade A1, A2, A3 and A4. Distilled water (refractive index: 1.7) was used to attain optical contact between the layers. White, white gray, and white brown backgrounds were used to assess the influence of the background on the final shade. And the mean color difference value$({\Delta}E)$ was calculated. Results and conclusion: The results obtained from this study were as follows. 1. There was a significant correlation between the thickness ratio of the ceramic core/dentin porcelain system and $L^*,\;a^*\;and\;b^*$ values when the total thickness of specimen combination was smaller than 1.4 mm(P<0.05). 2. The specimen which the ceramic core thickness was more than 0.7 mm had the best masking effect against background colors. 3. The mean color difference value$({\Delta}E)$ is smaller than 2 $({\Delta}E<2)$ when the ceramic core thickness was larger than 0.7 mm and the total thickness of specimen was more than 1.4 mm.

• Restorative Dentistry and Endodontics
• /
• v.37 no.2
• /
• pp.84-89
• /
• 2012

Objectives: This study analyzed the difference in color caused by different thickness in enamel layer of composite resins when applied with single and layering placement technique, and evaluated if the results agreed with the shade guide from the manufacturers to verify reliability of the color matching process of the manufacturers. Materials and Methods: For single composite resin samples, 6 mm diameter and 4 mm thickness cylindrical samples were fabricated using Ceram-X mono (DENTSPLY DeTrey) and CIE $L^*a^*b^*$ values were measured with spectrophotometer. Same process was done for layering composite resin samples, making 3 dentinal shade samples, 4 mm thickness, for each shade using Ceram-X duo (DENTSPLY DeTrey) and enamel shade resins were layered in 2 mm thickness and CIE $L^*a^*b^*$ values were measured. These samples were ground to 0.2 mm thickness each time, and CIE $L^*a^*b^*$ values were measured to 1 mm thickness of enamel shade resin. Results: Color difference (${\Delta}E^*$) between single and layering composite resin was 1.37 minimum and 10.53 maximum when layering thicknesses were between 1 mm and 2 mm and 6 out of 10 same shade groups suggested by manufacturer showed remarkable color difference at any thickness (${\Delta}E^*$ > 3.3). Conclusion: When using Ceram-X mono and duo for composite resin restoration, following the manufacturer's instructions for choosing the shade is not appropriate, and more accurate information for Ceram-X duo is needed on the variation and expression of the shades depending on the thickness of the enamel.

• Asian Journal of Turfgrass Science
• /
• v.15 no.2
• /
• pp.51-64
• /
• 2001

Summer stress is one of the serious problems on cool-season grass at the soccer fields in Korea during heavy rainy season. This study was conducted to intestigate the effect of shade net with regard to its percent (0, 50, 75), color (black, green), height (0 cm, 30 cm) and time (7 hr, 24 hr) on turf canopy temperature, light intensity, leaf color, turf performance, clipping yield and root dry weight of cool-season turfgrass. Turf canopy temperature was 6~13$^{\circ}C$ under black and green shade net when temperature was over 4$0^{\circ}C$. Light intensity was also decreased from 40 to 94% under black and green shade net compared to control. Black shade net was more effective than green net in reduction of temperature and light intensity. Green shade net was found to be better for photosynthesis of cool-season grass. Leaf color, turf performance, clipping yield, and root dry weight were better and increased under 50% and 75% shade net. 50% black shade net with 30cm height and 7 hr treatment showed the best turf performance. It can be concluded that 50% and 75% green shade net can be used fur reducing summer stress on cool-season grass after soccer marches during heavy rain season. The shade net decreased the turf canopy temperature and reduced heating damage of cool-season turfgrass.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2005.04a
• /
• pp.40.1-40.1
• /
• 2005

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2023.04a
• /
• pp.71-71
• /
• 2023

• Korean Journal of Plant Resources
• /
• v.24 no.5
• /
• pp.613-621
• /
• 2011

Plastic house and laboratory experiments were conducted to determine the effects of substrate components and shade degrees on plant growth and physiologically-active substance content and antioxidant activity of Panax ginseng. No significant difference in growth characteristics among substrates was observed. However, shade treatment also significantly reduced leaf area, chlorophyll content, root length, and shoot and root fresh weight (P<0.05) with increasing of the degree. Total phenolics level [mg ferulic acid equivalents (FAE) $kg^{-1}$ DW] was higher in root parts (25.8 to 28.4 mg $kg^{-1}$) than shoot parts (20.7 to 23.8 mg $kg^{-1}$) of Panax ginseng, and with shade (23.7 to 28.4 mg $kg^{-1}$) than without shade (20.7 to 25.8 mg $kg^{-1}$). However, total flavonoids [mg naringin equivalents $kg^{-1}$ DW] was more detected in the shoot part (17.4 to 26.8 mg $kg^{-1}$) than in the root part (6.7 to 7.0 mg $kg^{-1}$) of Panax ginseng. Methanol extracts from the Panax ginseng plants dose-dependently increased DPPH free radical scavenging activity as a antioxidant potential, and the activity was higher in shoot parts (31.1 to 36.5%) than in root parts (24.9 to 28.7%), and without shade than with shade. In conclusion, shade affects plant growth as well as physiological activity of Panax ginseng under plastic house condition.