• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.485-489
• /
• 2008

To achieve the optimal sewer layout design, most developed models are designed to determine pipe diameter, slope and overall layout in order to minimize the least cost for the design rainfall. However, these models are not capable of considering the superposition effect of runoff hydrographs entering each junction. The suggested Optimal Sewer Layout Model (OSLM) is designed to control flows and distribute the node inflows while taking into consideration the superposition effect for reducing the inundation risk from the sewer pipes. The suggested model used the genetic algorithm to determine the optimal layout, which was connected to the SWMM (Storm Water Management Model) for the calculation of the hydraulic analysis. The suggested model was applied to an urban watershed of 35 ha, which is located in Seoul, Korea. By using the suggested model, several rainfall events, including the design rainfall and excessive rainfalls, were used to generate runoff hydrographs from a modified sewer layout. By the results, the peak outflows at the outlet were decreased and the overflows were also reduced.

• 수도
• /
• 통권25호
• /
• pp.28-39
• /
• 1981

• 한국수자원학회논문집
• /
• 제51권4호
• /
• pp.347-354
• /
• 2018

도시유역에서 발생한 유출은 지표면뿐만 아니라 하수관망을 통해 배수되며, 도시침수 모의 수행시 하수관망을 수문학적 배수 시스템의 한 구성요로서 고려하는 것은 매우 중요하다. 그러나 도시 침수 모의를 수행하는 대부분의 연구자들이 적절한 기준에 준하지 않고 직관적으로 하수관망을 단순화시켜 모의를 수행하는 실정이다. 따라서 본 연구에서는 1D-2D 결합 도시침수 해석 모형을 이용하여 수지상 구조에 구분법에 기반하여 단순화된 하수관망의 도시침수 해석 결과에 미치는 영향을 분석하였다. 하수관망 해석을 위한 1차원 모델은 Lee et al. (2017)에 의해 소개된 모형으로서 지표면과 하수관망 사이의 유입과 역류를 동시에 모의할 수 있고, 2차원 지표면 모델은 불규칙 삼각망을 이용하여 지표수 흐름을 모의하며 1차원 하수관망 해석모형과 연계되어 도시침수를 모의할 수 있다. 하수관망은 수지상 구조 구분법에 기반하여 2차, 3차 그리고 단순화 하지 않은 경우로 구분할 수 있으며, 구분된 각 하수관망은 서울시 사당역 인근에 많은 침수 피해를 발생시킨 2011년 7월 27일 강우 사상에 적용하여 제안된 방법의 적용성을 평가하였다. 모든 케이스에 대하여 침수면적, 지표면에서 하수관망으로의 유입 유량, 하수관망에서 지표면으로의 역류 유량 등을 비교하였으며, 마지막으로 하수관망 단순화를 위한 적절한 기준 제시에 대한 논의를 수행하였다.

• 한국콘텐츠학회논문지
• /
• 제12권8호
• /
• pp.388-398
• /
• 2012

본 연구에서는 도시 하수관거시스템의 침수위험순위 평가를 위하여 엔트로피(Entropy) 기법 및 다기준 의사결정기법의 하나인 프로메티(Preference Ranking Organization METHod for Enrichment Evaluations, PROMETHEE)를 적용하였다. 엔트로피와 프로메티를 이용한 침수위험순위 산정에 있어서 평가 대상이 되는 항목들은 두 가지의 접근방식으로 선정되었다. 먼저 침수발생 및 피해 규모에 영향을 미치는 인자로 지형 환경적 요인으로써 유역의 평균고도, 평균경사, 유역폭, 인구수 및 관밀도를 선정하였다. 또한 각 시스템별 침수가 가장 크게 발생하는 초과강우사상을 선정 및 적용하여 시스템내 월류발생량 및 발생지점 두 가지를 이용한 치수안전성 지수를 추가적으로 고려하였다. 본 논문에서 적용된 엔트로피기법과 프로메티에 의한 도시 하수관거시스템 침수위험순위 평가는 추후 하수관거 정비사업의 계획 및 추진에 있어서 각 시스템별 위험도에 따른 개량우선순위 결정 및 평가지표로서 활용될 수 있을 것이다.

• 상하수도학회지
• /
• 제24권5호
• /
• pp.549-560
• /
• 2010

Recently, heavy rainfalls due to the climate change in Korea have caused inundation problems in urban sewer networks. In july 2006, a flooding accident at Misari motorboat racing stadium near the Han river occurred due to the effect of record-breaking outflow discharge from Paldang-dam. The purpose of this study was to simulate and analyze the flooding accident at Misari stadium by MOUSE model. The results of simulation analysis indicated that the total flood volume was $1,313,450m^3$. The effect of back water was 85.9% of the total volume which was caused by the manhole accident, and the effect of accumulated runoff was 14.1% of total volume which was caused by non-return valve shutdown. The simulation results of this MOUSE modeling that was linked to the boundary condition of the dynamic flows in the river by DWOPER model showed the potential of successful inundation analysis for sewer networks.

• 물과 미래
• /
• 제23권2호
• /
• pp.251-263
• /
• 1990

본 연구의 목적은 도시 유역에서의 표면유출에 의한 맨홀 유입량을 추정하고 관망에서의 흐름을 해석하기 위한 모형을 개발하기 위한 것이다. 각 맨홀로의 유입량은 합리식을 이용한 단순방법으로 유입 수문곡선을 모의하는 방법과 해당유역 특성을 고려한 표면유출 모의에 의한 유입 수물곡선 결정방법이 이용된다. 관망에서의 흐름은 Saint-Venant공식의 dynamic equation에 유한음차분법(four-point implicit method)응 적용하여 동시해법으로 해석하였다. 특히 압력류(surcharge flow)흐름은 관의 상단에 좁고 긴 가상관을 연결시켜 모든 흐름을 개수로 흐름으로 해석가능 하도록 전환함으로써 해석의 단순화를 기하였고, 개발된 USS-slot모형이 부정류 우수관망 흐름을 적절히 모의할 수 있는가를 판별하기 위하여 기존에 연구된 관망에 적용하여 그 결과들을 비교 분석하였다.

• 상하수도학회지
• /
• 제27권6호
• /
• pp.711-721
• /
• 2013

Optimal operation of a combined sewer network with distributed storage facilities aims to use the whole retention capacity of all reservoirs efficiently before overflows take place somewhere in the considered network system. An efficient real-time network control (RTNC) strategy has been emerging as an attractive approach for reducing substantially the overflows from a sewer network compared to the conventional fixed or manually adjusted gate setting method, but the related concrete framework for RTC development has not been throughly introduced so far. The main goal of this study is to give a detailed description of the RTNC systems via reviewing several guidelines published abroad, and finally to suggest methods for the proper application of RTNC on distributed storage facilities. Especially, this study is focused on emphasizing the importance of hierarchical structure of RTNC system that consists of three control layers (management, global control and local control). Further, with regard to the global control layer which is responsible for the central overall network control, the wide-ranging details of two components (adaption and optimization layers) are also presented. This study can provide the valuable basis for the RTNC implementation in the particular sewer network with distributed multiple storage facilities.

• Environmental Engineering Research
• /
• 제22권4호
• /
• pp.393-400
• /
• 2017

One of the big problems facing municipalities is the management and control of urban flooding where urban drainage systems are under growing pressure due to increases in urbanization, population and changes in the climate. Urban flooding causes environmental and infrastructure damage, especially to roads, this damage increasing maintenance costs. The aim of the present study is to develop a decision support tool to identify the performance of storm networks to address future risks associated with climate change in the Middle East region and specifically, illegal sewer connections in the storm networks of Karbala city, Iraq. The storm water management model has been used to simulate Karbala's storm drainage network using continuous hourly rainfall intensity data from 2008 to 2016. The results indicate that the system is sufficient as designed before consideration of extra sewage due to an illegal sewer connection. Due to climate changes in recent years, rainfall intensity has increased reaching 33.54 mm/h, this change led to flooding in 47% of manholes. Illegal sewage will increase flooding in the storm system at this rainfall intensity from between 39% to 52%.

• 상하수도학회지
• /
• 제23권6호
• /
• pp.743-752
• /
• 2009

One of the major problems associated with operation of domestic sewer lines involves hydraulic problems such as insufficient conveyance capacity, exceeding maximum velocity, and deficiency of minimum velocity. It has also been pointed out that influent concentration lower than design concentration of pollutants, which is mainly caused by unidentified inflow and infiltration, degrades the operational efficiency of many sewage treatment plants (STPs). A computer-added analysis method supporting a coupled simulation of sewage quality and quantity is essentially required to evaluate the status of existing STPs and to improve their efficiency by a proper sewer rehabilitation work. In this study, dynamic water quality simulations were conducted using MOUSE TRAP to investigate the principal parameters that governs the changes of BOD, ${NH_4}^+$, and ${PO_4}^{3-}$3- concentrations within the sewer networks based on data acquired through on-site and laboratory measurements. The BOD, ${NH_4}^+$ and ${PO_4}^{3-}$3- concentrations estimated by MOUSE TRAP was lower than theoretical pollution loads because of sedimentation and decomposition in the sewer. The results revealed that sedimentation is a most important factor than other biological reactions in decreasing pollutant load in the sewers of C-city. The sensitivity analysis of parameters pertaining to water quality changes indicated that the effect of the BOD decay rate, the initial DO concentration, the half-saturation coefficient of dissolved BOD, and the initial sediment depth is marginal. However, the influence of settling rate and temperature is relatively high because sedimentation and precipitation, rather than biological degradation, are dominant processes that affect water quality in the study sewer systems.

• 한국GIS학회:학술대회논문집
• /
• 한국GIS학회 1999년도 추계학술대회 발표요약문
• /
• pp.21-25
• /
• 1999

Planning support systems(PSS) add more advanced spatial analysis functions than Geographic information systems(GIS) and intertemporal functions to the functions of spatial decision support systems(SDSS). This paper reports the continuing development of a PSS providing a framework that facilitates urban planners and civil engineers in conducting coherent deliberations about planning, design and operation & maintenance(O&M) of water-distribution networks for urban growth management. The PSS using dynamic optimization model, modeling-to-generate-alternatives, value engineering(VE) and life-cycle cost(LCC) can generate network alternatives in consideration of initial cost and O&H cost. Users can define alternatives by the direct manipulation of networks or by the manipulation of parameters in the models. The water-distribution network analysis model evaluates the performance of the user-defined alternatives. The PSS can be extended to include the functions of generating sewer network alternatives, combining water-distribution and sewer networks, eventually the function of planning, design and O&H of housing sites. Capacity expansion by the dynamic water-distribution network optimization model using MINLP includes three advantages over capacity expansion using optimal control theory(Kim and Hopkins 1996): 1) finds expansion alternatives including future capacity expansion times, sizes, locations, and pipe types of a water-distribution network provided, 2) has the capabilities to do the capacity expansion of each link spatially and intertemporally, and 3) requires less interaction between models. The modeling using MINLP is limited in addressing the relationship between cost, price, and demand, which the optimal control approach can consider. Strictly speaking, the construction and O&M costs of water-distribution networks influence the price charged for the served water, which in turn influence the. This limitation can be justified in rather small area because price per unit water in the area must be same as that of neighboring area, i.e., the price is determined administratively. Planners and engineers can put emphasis on capacity expansion without consideration of the relationship between cost, price, and demand.