• Journal of Environmental Science International
• /
• v.25 no.8
• /
• pp.1155-1163
• /
• 2016

The treatment efficiencies of domestic sewage treatment processes were analysed and assessed to suggest and design a suitable technology for coal seam gas (CSG) water treatment. Two sewage treatment plants (S and G in Busan) were selected. The former operates with standard activated sludge and modified Ludzak Ettinger processes while the later uses the combination of $A_2/O$ and gravity fiber filtration. For both plants, the concentrations of BOD, $COD_{Mn}$, T-N and T-P were about 5.0, 19.0, 5.0, 11.0 and 1.0 ppm, respectively, which satisfy the discharge standards. Therefore, although sewage treatment processes seems to be applicable for CSG water treatment, additional processes to remove total dissolved solids and ionic compounds (i.e. bicarbonate) need to be introduced to produce fit-for-purpose water resources for beneficial use (in accordance with Water ACT 2013). This, for the CSG treatment process design, it is necessary to align the operating conditions with merging methods of combinable unit technology obtained from sewage treatment processes.

• The Journal of Engineering Geology
• /
• v.17 no.1 s.50
• /
• pp.125-133
• /
• 2007

The environmental and geotechnical properties are investigated to the 8th landfill area made of only sewage sludge in Nanji-Do. To do this, the soils are sampled in this area, and leaching tests, heavy metal content tests, and so on are performed to research the environmental properties. As the result of heavy metal content tests, Pb, Zn, Cu, Ni, Cd and Cr were leached from the sewage sludge. Because the leaching concentration of Cu is more than the standard value of California state, Cu content have to bring down during the recycling of the sewage sludge. Meanwhile, a series of tests concerning specific gravity, liquid and plastic limits, compaction, permeability and shear strength is performed to research the geotechnical properties. The sewage sludge is consisted of sand, silt and clay, and is classified into non-organic silt or organic clay with 42.3% of plastic index. As the result of compaction test, it is expected that the compaction effect according to variation of water contents is low relatively because the dry unit weight is low and the curve of compaction forms flatness. Also, as the result of direct shear tests, the cohesion is $0.058kg/cm^2$, and the internal friction angle is $14^{\circ}$. Taking everything into consideration, the various problems are happening in case of recycling the sludge like the cover layer of landfill and so on because the compaction is bad, and the shear strength is low. Also, it is expected that the ground water pollution caused by leaching the heavy metal into the sludge. To do recycling the sewage sludge in this site, supplementary and treatment programs should be prepared.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.2
• /
• pp.25-31
• /
• 1999

Energy recovery technology from municipal solid waste has been increasingly established in many countries. Anaerobic treatment of municipal sewage sludge has low digestion efficiency because of low organic loading rate of sewage sludge. The purpose of this study was to evaluate anaerobic biodegradability of food waste which was based on organic loading rate and seeding rate. From the results of anaerbic biodegration, the optimum condition for seeding rate was turn out over 40%, which did not inhibition of methane production.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.922-927
• /
• 1991

This study is aimed to investigate a design problem of the fuzzy logic controller for the activated sludge process(ASP) in sewage treatment. The modeling technique proposed by Sugeno is used to express the ASP effectively and identification of a fuzzy model of the ASP is carried out utilizing actual operational data obtained from a metropolitan sewage plants. The model-based fuzzy controller is designed by rules generated from the identified ASP fuzzy model. Feasibility of the designed controller is tested through computer simulations.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.209-212
• /
• 1990

The activated sludge process is a commonly used method for treating sewage and waste waters. The process is characterized by a lack of measurement instrumentations and control goals that are neither well defined nor well understood. In the present study the concept of fuzzy control is employed for such process in which a design method for fuzzy controller based on a multivariable fuzzy reasoning algorithms is investigated and then simulation results are presented.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.10
• /
• pp.651-655
• /
• 2012

This study aimed to investigate the effect of an inorganic conditioner composed of natural inorganic materials on the dewaterbility of sewage sludge and compare the performance with those of conventional organic polymeric conditioners. A dosage of 2.0 mg inorganic conditioner/g sludge TS decreased time to filter test (TTF), specific resistance to filtration (SRF), water content of dewatered sludge cake, turbidity from 146 to 41 sec, from $8.3{\times}10^{14}$ to $2.4{\times}10^{14}$ m/kg, from 82.1 to 77.1%, from 112 to 61.1 NTU, respectively, which was compatible to the conventional cation organic polymer. An inorganic conditioner would be used in sewage sludge treatment as a suitable alternative conditioner. Regression analysis showed a strong relationship among TTF, SRF, and water content.

• Microbiology and Biotechnology Letters
• /
• v.36 no.3
• /
• pp.233-239
• /
• 2008

A new approach to the solubilization of excess activated sludge by the inoculation of lactic acid bacteria was studied to reduce the amount of sludge produced in the activated sludge treatment process. Aerobic microorganism in sludge was lysed in anaerobic condition and the cytoplasmic substance eluted was utilized as a carbon source by lactic acid bacteria. On the basis of sludge solubilization efficiency, Lactobacillus brevis and Leuconostoc mesenteroides subsp mesenteroides were selected the best candidates among five kinds of Lactobacillus sp. and seven kinds of Leuconostoc sp. The sludge solubilization efficiency by heterofermentative lactic acid bacteria was more efficient than that of homofermentative bacteria. Initial value of soluble COD (sCOD) was 1050 mg/L at the initial inoculation time increased to 3070 mg/L (192% solubilization) at 96 h of the incubation time. The inoculation of lactobacillus brevis to the sludge resulted in 2824% increase in sCOD value after 96 h of incubation than the control experiment. Leuconostoc mesenteroides subsp mesenteroides showed 152% increase of solubilization and 30% increase of S-COD/T-COD on 96 h of incubation time. Considering the increase of S-COD by the inoculation of Leuconostoc sp. on 24 h, 10% inoculation of lactic acid bacteria to the sludge was most effective.

• Microbiology and Biotechnology Letters
• /
• v.40 no.4
• /
• pp.424-429
• /
• 2012

The intention of this research was to investigate the solubilization of primary sewage sludge using lactic acid bacteria cultured in a glucose and yeast extract medium. Glucose as the carbon source and yeast extract as the source of nitrogen were chosen as an economic medium with the potential for the mass production of lactic acid bacteria. The optimal concentrations of the medium were 3% (w/v) glucose and 2% (w/v) yeast extract. In this study, in order to improve field applications for the solubilization of sludge at sewage treatment plants, a powdered form of lactic acid bacteria was produced. The optimal inoculum of the powder for the maximum efficiency of solubilization was 1% (w/v). In that condition, the SCOD value increased from 8600 (mg/L) at the beginning of experiment to 10290 (mg/L) at 96 h, with the highest solubilization rate (20.6% DDCOD) and 11.2% (SCOD). Also, the TVFAs of the lactic acid bacteria inoculation group were produced more than that of the control group. In particular, acetic acid was produced 5 times more in the experimental group than in the control group. In this research, the potential of lactic acid bacteria in the pretreatment of primary sewage sludge as a solubilizer, and as an energy source producer for microbial fuel cells was revealed.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.765-771
• /
• 2018

In this study, the optimization of carbonization conditions in manufacturing processes was performed to improve the absorption performance of sewage sludge based sorbent used for treating $H_2S$ out of all odorous substances generated by various environmental facilities. Adsorbents applied were manufactured from the sewage treatment plant under different carbonization conditions, such as temperature and heating rate, and the correlation between the adsorption performance and physical properties of the adsorbents was verified. As a result, the adsorption performance of sludge at $900^{\circ}C$ with a heating rate of $10^{\circ}C/min$ was the best, and the SEM and BET analysis revealed that specific surface area and characteristics of pore (size, volume) were major parameters for the adsorption. In addition, the effect of K ions used for improving the adsorption performance of the optimum carbonization condition sorbent was insignificant for the sewage sludge based sorbent.

• Journal of Wetlands Research
• /
• v.9 no.1
• /
• pp.61-67
• /
• 2007

Our life totally depends on activated sludgeprocess for treatment of wastewater: sewage and industrial wastewater. Activated sludge process was the epoch-making technology in Environmental field. One century has been almost passed since the process was developed in England, and the process is still on the development of improvement. Here, history of activated sludge process, its mechanismsof treating the wastewater, expectations that we had on the process in the past, and future image and possibility on the process were presented. By reviewing the events related to the process, we can foresee potentials for new possibility of activated sludge process.