• Journal of Arbitration Studies
• /
• v.23 no.1
• /
• pp.85-105
• /
• 2013

The entertainment industry has developed along with current Korean wave fever, and so entertainment-related disputes are increasing rapidly. Litigation is a poor fit for entertainment disputes because of characteristics such as temporal sensitivity. Thus, in the US, the entertainment industry resolves these disputes through ADR mechanisms like arbitration, but cases of settling such disputes through arbitrations are very rare in Korea. This study examined the characteristics and types of entertainment disputes and considered the compatibility of arbitration as a method for settling disputes, and then suggested tasks for revitalizing arbitration systems as entertainment dispute resolution procedures. Arbitrations have many merits, such as the rapid pace of procedures, confidentiality, satisfying the long-term desires of business relationships, the low cost of settling disputes, judgments rendered by experts, etc.; thus, it is a very suitable mechanism to settle entertainment-related disputes. The study proposes necessary steps for revitalizing arbitration systems for entertainment disputes. First, awareness of entertainment industry workers about the arbitration system should be raised. Second, special educational programs for members the of Korean Commercial Arbitration Board related to entertainment should be set up and operated together with encouraging positive attitudes toward actions like establishing a dedicated arbitration unit on entertainment disputes. Third, neutral, professional arbitrators should be secured and aggressive disclosures made. Fourth, a professional ADR organization such as an "Entertainment Arbitration Committee" should be established.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.11a
• /
• pp.1-41
• /
• 2001

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.496-503
• /
• 2001

The suspension of the optical pickup actuator is damped by the presence of silicone rubber damper bond at its termination. In spite of the presence of it, the actuator still exhibits a strong mechanical resonance which affects its settling time and vibrational characteristics. This resonance can cause errors in reading information from the disk, particularly in high speed CD-ROM and DVD-ROM drives. Ferrofluids are stable colloidal suspensions of sub-micron sized magnetic particles in a carrier liquid. In the actuator design, ferrofluid is applied to the surface of the magnets until the quantity is sufficient to maintain intimate contact with the bobbin/carrier assembly. The fluid is retained in the magnetic field and its viscosity provides the desired mechanical damping to the moving assembly, improving the actuators settling time and vibrational characteristics. Access time is also improved, particularly on warped or eccentric discs.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.180-185
• /
• 2001

In order to regulate the physical characteristics of an ocean dumping material in the south-eastern East Sea, the diffusion characteristics with the observation, hydraulic experiment and numerical experiment data are investigated. The main results are as follows; (1) Spying CTD observation result of the area of Jung in the East Sea, the ocean dumping area had influenced the Tsushima warm current of high temperature and salinity. Horizontal turbulent diffusivity is 1.913${\times}$10$^{7}$ $\textrm{cm}^2$/sec by drogue tracking. (2) From the experiment of settling, the initial settling velocity of each material is 1.0∼2.7 cm/sec according to the specific gravity and initial concentration. In the pycnocline, particles didn't settle under the pycnocline any more and accumulated. It is signified that calculation of the sedimentation rate of the ocean dumping material including of vertical diffustion must be regard the pycnocline in the ocean area have well-developed pycnocline. (3) Vertical turbulent diffusivity were 2.219${\times}$10$^{-8}$∼8,874${\times}$10$^{-4}$ $\textrm{cm}^2$/sec from the experiment of settling. And, the pycnocline influenced the vertical turbulent diffusivity. (4) From the result of diffusion simulation in the East Sea, the co-concentration line of 0.05 ppm and 0.1 ppm are limited at dumping area after 200 days. The constant concentration line of 0.01 ppm is distributed to the vicinity of Ulleungdo and Tokdo, but isn't distributed to the coastal area of East Sea and southern area of Jung in the East Sea.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.166-169
• /
• 2003

In this study, we evaluated the characteristics by the addition of 3 different kinds of nonionic surfactant to improve the dispersion stability of slurries. Slurry stability is an issue in any industry in which settling of particles can result in poor performance. So we observed the variation of particle size and settling rate when the concentration and addition time of surfactant are changed. When the surfactant is added after milling process, the particle size and pH became low. It is supposed that the particle agglomeration was disturbed by adsorption of surfactant on alumina abrasive. The settling rate was relatively stable when nonionic surfactant is added about 0.1~1.0 wt%. When molecular weight(MW) is too small like Brij 35, it was appeared low effect on dispersion stability. Because it can't prevent coagulation and subsequent settling with too small MW. The proper quality of MW for slurry stability was presented about 500,000. Consequently, the addition of nonionic surfactant to alumina slurry has been shown to have very good effect on slurry stabilization. If we apply this results to copper CMP process, it is thought that we will be able to obtain better yield.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.4
• /
• pp.107-113
• /
• 2009

This paper considers the influence of floc on the sedimentation rate for the cohesive material. The effects of floc density and size changes were also taking into consideration during the experiment. The settling velocity of a discrete floc was measured in a quiescent water column. Floc diameter and density were investigated using a modified Stokes equation with some constants such as water density, viscosity, material density and the floc fractal dimension $n_f$ obtained from the relationship between the floc diameter and the floc settling. The floc diameter of quartz and alumina increased at increasing initial concentrations. The floc size of quartz with increasing NaCl concentration varied between approximately 0.8 um to $10{\mu}m$. Floc density decreased as floc size increased. The floc settling velocity and the floc diameter have a straight line relationship on a logarithm. The floc fractal dimension nf was 2.65 with increasing of initial concentration and 2.93 with increasing of NaCl. The exponent n to predict the settling velocity was proposed and varied from 1 to 1.93.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.2
• /
• pp.207-214
• /
• 2013

To evaluate characteristics of water quality in Jeju, a study was implemented for Han stream and retention ponds. Inflow water quality of retention ponds was heavily dependent on precedent rainfall, and no pesticide was detected due to the little artificial pollution sources. A smooth settling efficiency curve was noticed because heavy particles were already settled down in front of the retention pond. There were weak relationships between retention time and water quality, and this can be attributable to high concentration of pollutants influx at peak inflow. In addition, as Han stream retention pond has a role of groundwater recharge, inflow control based on water quality as well as quantity is needed to maximize pollutant removal at the retention ponds.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.3B
• /
• pp.153-159
• /
• 2012

In this study, we proposed modified settling basins transformed by substituting the downstream sill for low head weirs such as generic labyrinth weir and inclined crest labyrinth weir worked as internal baffles. Laboratory experiments were carried out to understand hydraulic characteristics inside of the settling basin to improve the efficiency of sedimentation rate. For a quantitative analysis, we suggested the headwater ratio($H_t/P$), the magnification ratio(L/W) and the inflow rate per total crest length($q_L$) as primary analysis indexes for sedimentation efficiency. Six different types of settling basin were used for labscaled pilot tests by distinguishing with internal structures. Based on results, the variation of headwater ratio with the change of magnification ratio would highly affect the deposition efficiency(%) and it was improved under specific condition that repeating arrange number(N) of labyrinth weir was between 2 and 4. Also, the regression analysis showed that initial condition and shape for improving sedimentation efficiency were plotted on the graph for both $q_L{\geq}3.5cm^2/s$ and $L/W{\leq}3.5$. It would be expected that the geometrically optimized labyrinth settling basin could be designed with proper deposition efficiency for inflow rates of influent and required area of settling basin utilizing the proposed analysis index in this study.

• Journal of Korea Soil Environment Society
• /
• v.2 no.1
• /
• pp.21-34
• /
• 1997

Retention ponds have been dug along some of the motorways in France to minimize environmental pollution by preventing pollutants from spreading over the surrounding area. A series of studies have been conducted to determine the physicochemical characteristics of the particles settling down in such a pond to evaluate the effectiveness of the pond as a trap for heavy metals such as Pb, Zn and Cd. The highly contaminated roadside soil and the uncontaminated background soil were also studied for comparison. The settling particles exhibited heavy metal concentrations of 2 to 8 times as much as the background Sologne soil, depending on the metal species. However, the heavy metal concentrations in the roadside soil were 7 to 26 times higher than those in the· settling particles. Sequential extraction experiments illustrated that the highly contaminated roadside soil consisted mainly of the readily soluble fractions (FII, FIII and FIV) for all three heavy metals, but little W which is hardly soluble. The proportion of W considerably increased up to one third of the total in the settling particles for Pb and Zn. This result as well as the large concentration differences between the roadside soil and the settling particles indicates that most of the heavy metals were lost to the surroundings even before reaching the retention pond. Cd exhibited somewhat different behavior in that the most soluble FI, which is negligible for Pb and Zn, occupied as much as one fourth of the total in the roadside soil. In addition, FV for Cd did not increase in the settling particles.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.1
• /
• pp.75-82
• /
• 2016

In this study, a cross-damped low vibration controller was developed to reduce vibration in ultra-precision dual stage driven by master/slave principle. In master-slave structure, the master stage leads the driving motion and the slave stage follows it so as to maintain a constant gap between two stages. In this structure, a small perturbation of master stage makes big oscillations in slave servoing stage, so a low damped master stage composed of voice coil motor makes a long vibration in settling area after driving motion profile. In this research, an effective feedback damping algorithm for increase the damping characteristics of the dual stage was developed. The designed velocity damping algorithm improves the system stability and reduces the settling time of the whole system. Simulation and experimental results show that the developed algorithm reduces settling time and improves the regulating performance.