• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.415-419
• /
• 1996

This paper presents motor speed and phase angle detection method using a sinusoidal AC tachogenerator. The 2-phase or 3-phase output tacho-generator can be adopted, and its' output voltages must have sinusoidal waveforms. Because the detection algorithm is simple, the proposed method can be implemented with analog devices of microprocessor conveniently. And the proposed method has a very short detection delay time. Especially in the analog implementation, there is no delay time without the settling time of analog devices. With the Experimental results, it is verified that the proposed method can accurately detect the instantaneous motor speed and phase over the wide ranges.

• 전기학회논문지
• /
• 제58권8호
• /
• pp.1624-1632
• /
• 2009

In this study, we introduce the design methodology of an optimized Interval Type-2 fuzzy controller. The fixed MF design of type-1 based FLC leads to the difficulty of rule-based control design for representing the linguistically uncertain expression. In the Type-2 FLC as the expanded type of Type-1 FLC, we can effectively improve the control characteristic by using the footprint of uncertainty(FOU) of membership function. Type-2 FLC has a robust characteristic in the unknown system with unspecific noise when compared with Type-1 FLC. Through computer simulation as well as practical experiment, we compare their performance by applying both the optimized Type-1 and Type-2 fuzzy cascade controllers to ball and beam system. To evaluate each controller performance, we consider controller characteristic parameters such as maximum overshoot, delay time, rise time, settling time and steady-state error.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권12호
• /
• pp.616-623
• /
• 2003

Conventional P/PI speed controller of today's servo drives should be manually tuned the controller switching set-point by trial-and-errors, which may translate the drive system down-time and loss of productivity. The adjustable drive performance is heavily dependent on the quality of the expert knowledge and becomes inadequate in applications where the operating conditions change in a wide range, i.e., tracking command, acceleration/deceleration time, and load disturbances. In this paper, the demands on simple controls/setup are discussed for industry servo drives. Analyzing the frequency content of motor torque command, P/PI control mode switching is automatically performed with some prior knowledge of the mechanical dynamics. The dynamic performance of the proposed scheme assures a desired tracking response curve with minimal oscillation and settling time over the whole operating conditions. For comprehensive comparison of traditional P/PI control scheme, extensive test is carried out on actual servo system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.223-225
• /
• 2002

In this paper, we designed fuzzy legit controller(FLC) for HVDC current control using genetic algorithm. The proposed method was applied to HVDC power system simulator in Korea Electrotechnology Research Institute(KERI). We are adjusted input/output gain of FLC by real-time using genetic algorithm. Experimental results show that FLC has the better control performance than PI controller in terms of settling time, rising time.

• 대한전자공학회논문지TE
• /
• 제37권3호
• /
• pp.60-65
• /
• 2000

산업공정제어에 지속적으로 널리 사용되는 PID제어기의 최적이득 자동 동조에 관한 새로운 방법을 제안한다. 이 방법은 먼저 제어대상의 계단응답으로부터 모델링된 1차 지연계를 Fade 근사화하고, Ziegler-Nichols의 방법으로 초기값을 정한 후, 최대 오버슈트, 감쇠비, 상승시간, 정정시간을 포함하는 퍼지추론함수를 최대로 하는 PID계수를 구함으로써 제어대상의 특성이나 부동작시간의 변화에도 적응성이 좋다는 장점이 있다

• 전자공학회논문지S
• /
• 제34S권6호
• /
• pp.94-103
• /
• 1997

This paper presents motor speed and revolution angle detection method using a sinusoidal AC tacho-generator. The 2-phase or 3-phase output tacho-generator can be adopted, and its' output voltages must have sinusoidal waveforms. Because the detection algorithm is simple, the proosed method can be implemented with analog devices or microprocessor conveniently. And the proposed method has a very short detection delay time. Especially in the analog implementation, there is no delay time without the settling time of analog devices. With the experimental results, it is verified that the proposed method can acculately detect the instantaneous motor speed and revolution angle over the wide ranges.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.166-169
• /
• 2002

The purpose of this paper is to develop systematic analysis and automatic tuning rule of PID controller for industry servo applications. Considering the coupling of inner current control loop and speed loop delay, the target plant fit into second-order plus time delay model. Based on PID controller design for high-order plus known/unknown time delay plant model, some formulars are provided for the control gain calculation and system-based theoretical analysis is developed, and it also allows an automatic controller setup to benefit the inexperienced user. In addition, the proposed design rule gives uniformly satisfactory performance and the motor speed stays on a desired response curve with minimal oscillation and settling time. This approach can be applicable in conjunction with the cascaded control loop which is widely used in practice.

• 한국조명전기설비학회지:조명전기설비
• /
• 제13권2호
• /
• pp.195-195
• /
• 1999

This paper is Proposed a new method to deal with the optimized auto-tuning for the PID controller which is used to the process-control in various fields. First of all, in this method, 1st order delay system with dead time which is modelled from the unit step response of the system is Pade-approximated, then initial values are determined by the Ziegler-Nickels method. So we can find the parameters of PID controller so as to minimize the fuzzy criterion function which includes the maximum overshoot, damping ratio, rising time and settling time. Finally, after studying the parameters of PID controller by Backpropagation of Neural-Network, when we give new K, L, T values to Neural-Network, the optimized parameter of PID controller is found by Neural-Network Program.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.417-419
• /
• 1998

The ICD(Individual-Channel-Design) is a multivariable control design method based on the classical frequence response, in which the channel decomposition and the loop shaping on frequence domain are introduced. However, in this manner, it is difficult to satisfy time domain specifications such as overshoot, rise time, settling time. To solve the problem, we propose a new design method using CDM(Coefficient Diagram Method). And a new feedforward compensator is introduced for reducing interconnections.

• 대한전기학회논문지
• /
• 제40권12호
• /
• pp.1262-1268
• /
• 1991

The electric furnace which has time delay and time varying characteristics cannot be controlled easily. In this paper, a fuzzy controller for a electric furnace is implemented using one chip processor 8751 and IBM PC. The fuzzy controller is implemented in the PC. The One chip processor 8751 can sense the furnace internal temperature and pass it to IBM PC and generate the driving signal for SSR. The membership function of the fuzzy controller is determined by Least Square method. from the experiments, we can show that the fuzzy controller can improve robustness to the load variation. And the settling time is reduce 4500 (sec) to 2500 (sec).