• 한국도로학회논문집
• /
• 제19권1호
• /
• pp.1-9
• /
• 2017

PURPOSES : The objective of this study is to develop an optimized method of mix design for rapid-set lightweight-formed mortar mix. To achieve this objective, the workability, setting time, and compressive strength of mixes under various conditions of mix design were evaluated. METHODS : The water-bonder ratio, fly-ash substitution ratio, and forming agent injection amount were selected as design variables in the study. The fluidity, setting time, density, and strength of the mortar mix were considered as major evaluation criteria of the mixture, and were subsequently utilized to evaluate the characteristics of the mortar mix under various conditions. RESULTS : The observations made from the mix design process are as follows: 1) the air content and fluidity increase as the forming agent ratio and forming agent ratio increase, respectively; 2) the maximum air content is approximately 20%; 3) the accelerating agent decreases the fluidity of the mortar mix by 15% on average; 4) the forming agent injection ratio and fly-ash substitution ratio yield significant effects on the initial and final set times of the mortar mix; 5) as the forming agent injection ratio and fly-ash substitution ratio increase, the compressive strength of the mortar mix decreases; and 6) the 28-day compressive strengths of the forming agent injection ratio and fly-ash substitution ratio yield the most significant effects. CONCLUSIONS : It is concluded that the governing design variables for the rapid-set lightweight-formed mortar mix are the forming agent injection ratio and fly-ash substitution ratio.

• 한국농공학회지
• /
• 제38권6호
• /
• pp.51-63
• /
• 1996

This study is about the problems found in the process of the current governments planning rural settlement area development. As a measure to solve them, It proposed the analysis method of village characteristic in terms of standard score and tried to use this method as a basic material in planning more effective rural settlement area development. On the basis of the above analysis, which is an objective basic material to solve the problems revealed in the process of the bottom-up development planning by the residents' demands, It shows the following conclusion about what method should be applied to each part according to a village's characteristics and its development level. 1. Accessibility can be a basic material for setting the local area, analyzing its settlement system, and them such development facilities as village-linking roads, rural road, or various kinds of bridges and determining the investment priority. 2. With the index of the industrial basis, we can see what village has plenty of social, economical resources including advanced industrial facilities and looking into the advance level of the industrial basis, we can get some information about determining the local area development direction such as estashing the plan to build a farm product gathering center, a collective work place, storage facilities, and special housing development. 3. Since the issue about living environment is raising it's head, compared to weakened agricultural competitive power, with the analysis of this living environment, we can get an objective basic material for solving problems caused by the local egoism and the effective investment strategy of the limited resources. Therefore, It is necessary that we should abstain from expert-centered planning and formal public opinion-collecting and on the basis of this analytic result, we should plan development. We need to continue our research about index selecting and differentiation, weight etc. and using these analysis methods, we should make up a systematic development plan by analyzing village characteristics and setting the development direction.

• 한국의류산업학회지
• /
• 제11권6호
• /
• pp.857-866
• /
• 2009

The objective of this study was to design a fashion storytelling method, which is a strategic instrument for constructing a fashion show with artistry and popularity, based on the principle and structure of storytelling. In order to understand the concept and principle of storytelling composed of story and telling and to introduce storytelling into fashion shows, we associated fashion design with the substance of a story, a show with the form of telling, and a fashion show with storytelling. Based on these associations, we analyzed the relationship between fashion show and storytelling and developed basic elements and structure necessary to design a fashion storytelling method. Through this study, we designed a fashion storytelling method with five steps, which are story planning, story development, fashion show structure design, fashion show production, and fashion show execution. These steps were again classified into contents setting step, structure design step, and expression step. The contents setting step included story planning and development for creating stories, and the structure design step means the design of fashion show structure that adds telling to the stories. Lastly, the expression step included fashion show production and execution that forms a storytelling by combining the stories and the telling.

• 항공우주시스템공학회지
• /
• 제7권3호
• /
• pp.1-6
• /
• 2013

Numerical optimization of two dimensional high lift configuration was performed with flow solver and optimization method based on RSM(Response Surface Model). Navier-Stokes solver with Spalart-Allmaras turbulence model was selected for the simulation of highly complex and separated flows on the flap. For the simultaneous optimization of both flap shape and setting (gap/overlap), 10 design variables (eight variables for flap shape variation and two variables for flap setting) were chosen. In order to generate the response surface model, 128 experimental points were selected for 10 design variables. The objective function considering maximum lift coefficient, lift to drag ratio and lift coefficient at specific angle of attack was selected to reduce flow separation on the flap surface. The present method was applied to two dimensional fowler flap in landing configuration. After applying the present method, it was shown that the optimized high lift configuration had less flow separation on the flap surface and lift to drag ratio was suppressed over entire angle of attack range.

• KIEAE Journal
• /
• 제16권5호
• /
• pp.21-28
• /
• 2016

Purpose: The Objective of this study is to explore the capabilities of an integrated modelling and simulation workflow when applied to an experiment-based research process, aimed at deriving daylight optimization strategies specific to tall buildings. Methods: Two methods were devised to apply this workflow with the help of DIVA and Rhino/Grasshopper. The first method is a multiple variant analysis by setting up an appropriate base case and analysing its daylight and energy performance, forming the basis of comparison for subsequent cases for design variants. The second method involved setting up the base case within a site context and conducting a solar irradiation study. An architectural variables such as overhang and shading device, were then defined as inputs in the parametric definition in Grasshopper to control the selected variable. Results: While the first method took advantage of the speed and efficiency of the integrated workflow, the second method was derived based on the ability to directly process simulation data within the integrated, single-software platform of the proposed workflow. Through these methods, different architectural strategies were explored, both to increase daylight penetration and to reduce radiant heat gain. The focus is on methods by which this workflow can be applied to facilitate the experimental derivation of daylight optimization strategies that are specific to tall building design.

• 기술경영경제학회:학술대회논문집
• /
• 기술경영경제학회 1999년도 제15회 하계 학술발표회 논문집
• /
• pp.245-265
• /
• 1999

MAUT and AHP are widely used for quantification of subjective judgements in various fields of decision making. This study focuses on the introduction and application of MAUT/AHP method which is a hybrid of MAUT and AHP techniques in R&D project priority setting. This hybrid model can clarify each factors' contribution using MAUT method and can reduce the number of pairwise comparisons of AHP method. This study applies AMUT/AHP method to the evaluation of R&D projects in a Government - funded research institute. To evaluate R&D projects, six evaluation factors are derived. SMART(Simple MultiAttribute Rating Technique) and DVM(Difference Value Measurement ) out of many MAUT methods are used to design the utility function ad AHP is used to allocate the weights among evaluation factors. The major findings of this study can be summarized as follows. First, the SMART/AHP and the DVM/AHP have the same results with the SMART and the DVM, and they are different results with AHP. It is very hard to decide which one is better. Second, MAUT/AHP's strength is analyzed. MAUT reflects utility values of evaluators to alternatives and AHP results objective and consistent weights of factors through pariwise comparisons. Third, its possible application fields are proposed. It is applicable to subjective decision making problems with high complexity and inter-independent factors.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제15권1호
• /
• pp.31-44
• /
• 2011

An impetus for reviving research in mathematical problem solving is the recent advance in methodological thinking, namely, the design experiment ([Gorard, S. (2004). Combining methods in educational research. Maidenhead, England: Open University Press.]; [Schoenfeld, A. H. (2009). Bridging the cultures of educational research and design. Educational Designer. 1(2). http://www.educationaldesigner.orgied/volume1/issue21]). This methodological approach supports a "re-design" of contextual elements to fulfil the overarching objective of making mathematical problem solving available to all students of mathematics. In problem solving, components critical to successful design in one setting that may be adapted to suit another setting include curriculum design, assessment strategy, teacher capacity, and instructional resources. In this paper, we describe the implementation, over three years, of a problem solving module into the main mathematics curriculum of an Integrated Programme school in Singapore which had sufficient autonomy to tailor-fit curriculum to their students.

• Journal of Biosystems Engineering
• /
• 제18권4호
• /
• pp.305-316
• /
• 1993

Fuel efficiency in tractor operations dep6nds on the selection of transmission gears and upon the engine being operated at or near maximum torque much of time. The objective of this study was to develop automatic control systems for tractor transmission ratio and governor setting so that the engine is operated at or near maximum torque as much of time as possible. An indoor test unit, which can be used to simulate tractor operation, was built in order to investigate the system design parameters and test the performance of the control system designed. The test-unit consists of engine, gear-type transmission, dynamometer, and control systems for transmission ratio and engine speed. Governor setting lever was controlled by a step motor, and the clutch and transmission levers were controlled by hydraulic cylinders and solenoid valves. The control systems showed good time responses which are assumed to be suitable for optimal tractor operation. The time required for shifting gears from clutch disengagement to engagement was about 1 second, which is almost the same as that for manual shift. And the settling time for engine speed control system was about 5 to 6 seconds.

• 한국환경농학회지
• /
• 제27권4호
• /
• pp.395-405
• /
• 2008

The objective of this study was to set priority for future core technologies in agricultural and environmental science using analytic hierarchy process(AHP). Forty-six technologies were derived by specialist meetings. Evaluation criteria, for setting the priority were decided as 'technology', 'marketability', and 'public'. Eighteen specialists in agricultural and environmental science answered to the questionnaire for AHP. As the results, 'technology' was decided as the most important evaluation criterion. The 'Feasibility' in 'technology' criterion, 'Market Growth' in 'marketability' criterion, and 'Impact to other industry' in 'public' criterion were decided as sub-criteria in each criterion. The most important technology was 'Risk assessment of toxic heavy metals and establishment of accreditation criteria for environmentally friendly agricultural products.

• 생물환경조절학회지
• /
• 제15권1호
• /
• pp.78-83
• /
• 2006

The objective of this study was to examine effect of ethylene removal apparatus on fruit quality of 'Niitaka' pear (Pyrus pyrifolia) in case of a double storage of apples and pears in a storage room. Ethylene and carbon dioxide concentration were efficiently decreased by the ethylene removal apparatus. Fruit weight loss was high at double storage of apples and pears (DAP) in a storage room compared with storage of pears. Fruit core browning was $5{\sim}22.5%$ at the fruits in DAP, but as setting ethylene removal apparatus it was not occurred till 90 days after storage. Soluble solids content and fruit peel hardness were not different among the treatments. Accordingly, a double storage of apples and pears in a storage room is possible as setting ethylene removal apparatus.