• 전자공학회논문지SC
• /
• 제47권1호
• /
• pp.17-28
• /
• 2010

본 논문은 DSP를 이용한 새로운 형태의 TFT-LCD 자동 화질 최적화 시스템을 제안한다. 실제 산업 현장에서 이와 같은 화질 최적화 과정은 시행착오를 반복하는 형식으로 진행되어 많은 시간이 소요되고 있으며 LCD 개발 엔지니어들의 성향 및 숙련도에 따라 조정 결과에도 편차가 큰 문제점이 있다. 이러한 시스템은 평균 감마 오차, 감마 조정 시간 및 플리커 등을 줄이기 위해 모바일 LCD 구동 IC 내의 감마 조정 레지스터들과 전압 설정 레지스터들을 자동적으로 제어한다. 제안된 최적 화질 향상 시스템은 측정 대상이 되는 모듈 (MUT, LCD 모듈), 제어 프로그램, 휘도 측정용 멀티미디어 디스플레이 측정기 및 인터페이스용 제어 보드로 구성되어 있다. 개발된 시스템에는 참조 감마 곡선과의 6-점 프로그램 정합 기술을 이용한 새로운 알고리즘 및 자동 전압 설정 알고리즘이 내장되어 있다. 개발된 알고리즘과 프로그램은 범용 LCD 모듈에 적용가능하다. 또한 1.8, 2.0, 2.2 및 3.0 감마를 조정할 뿐만 아니라 플리커 수준을 자동으로 조절한다. 제어 보드는 DSP와 FPGA로 구성되어 있고, RGB 및 CPU와 같은 다양한 인터페이스들을 지원한다. 개발된 자동 감마 시스템은 기존의 시스템에 비해 현저히 짧은 감마 조정 시간 및 아주 작은 평균 감마 오차를 보였다. 또한 본 논문에서 제안하는 시스템은 최적화된 감마 곡선 설정을 이용한 개발 공정을 향상시키고, 고화질의 LCD를 제공하는데 아주 유용하다.

• Journal of the Korean Statistical Society
• /
• 제29권4호
• /
• pp.435-441
• /
• 2000

Ko(1998, 1999) proposed certain flexible two-stage plans that could be served as one-step interim analysis in on-going clinical trials. The proposed Plans are optimal simultaneously in both a Bayes and a Neyman-Pearson sense. The Neyman-Pearson interpretation is that average expected sample size is being minimized, subject just to the two overall error rates $\alpha$ and $\beta$, respectively of first and second kind. The Bayes interpretation is that Bayes risk, involving both sampling cost and wrong decision losses, is being minimized. An example of this correspondence are given by using a binomial setting.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.587-590
• /
• 1999

Gaze detection is to locate the position on a monitor screen where a user is looking at. We implement it by a computer vision system setting a camera above a monitor, and a user move (rotates and or translates) her face to gaze at a different position on the monitor. Up to now, we have tried several different approaches and among them the Two Neural Network approach shows the best result which is described in this paper (1.7 inch error for test data including facial rotation. 3.1 inch error for test data including facial rotation and translation).

• 전기학회논문지
• /
• 제64권7호
• /
• pp.978-983
• /
• 2015

This paper presents Frequency Bias setting for the adequate AGC(Automatic Generator Control) operation based on the frequency response of power system in Korea. AGC frequency control recovers the frequency up to 60Hz following a primary control when the frequency suddenly drops due to a fault in power system. AGC can compensate an appropriate amount of generation by calculating ACE(Are Control Error) from the frequency deviation with the AGC frequency bias set from the actual frequency response in power systems. An appropriateness of the proposed AGC bias setting is verified through case studies employing the simulation model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.246-248
• /
• 2001

For protection of power system, it is a prerequisite to action characteristics of protective relay about a changing environment in power system and correcting the setting value. A substation operator always reside to correct of a relay, however there are problem of efficiency. Recently, power system operation become manless and supervision and control of incident is required anywhere, introduction of new concept as a intellectual manless protective relay is a recent trend. This paper is the web-based protective relay setting program that a manager make an analysis of operation and incident of power system through the web at a remote place corresponding recent manless of system and approach the protection relay and then can correct the error.

• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.98-103
• /
• 2012

One of the problems in the grinding process using the machining center(MC) with a small diametric wheels is machining error due to decrease of the quill diameter. In this thesis, side-cut grinding is performed with a vitrified bonded CBN wheel on the machining center to establish the basis of the grinding using MC. The grinding force and machining error are investigated experimentally for the change of the machining condition. It is possible to estimate the machining performance by the ratio of the setting depth of cut and actual depth of cut. In addition, the relation between normal grinding force and machining error is presented by the experimental formula.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.838-841
• /
• 2000

To improve the accuracy of products and improve the product quality, we need to enhance the machining accuracy of the machine tools. To this point of view, measurement and inspection of finished part as well as error analysis of machine tools has been studied for last several decades. OMM(On the Machine Measurement) has been issued to alternate with CMM, pointing out disadvantages of high expenses and lots of setting time in CMM. In this paper, we study 1) the spherical surface manufacturing by volumetric error compensation of machine tool, 2) the system development of OMM without detaching work piece from a bed of machine tool after working. 3) the generation of the finished part profile by On the machine measurement. Furthermore, the output of OMM is compared with that of CMM, and verified the feasibility of the measurement system.

• 한국정밀공학회지
• /
• 제20권9호
• /
• pp.197-204
• /
• 2003

This study proposes a method to reduce errors in scanning object and registration using a laser scanner. The method consists of 3 stages. First, there is an error induced by the difference of the distance between the probe and the object. It is possible to reduce the error by planning a scanning strategy: object setting, scan path. Second, the scan data of the tooling ball affects calculating the tooling ball center. A z-direction compensation is given to calculate more accurate registration points. Third, three points are used to determine a coordinate transformation on each frame. The maximum error usually lies on the third tooling ball in the conventional merging method. LSM (Least Square Method) is applied to a coordinate transformation to reduce the registration error.

• 디지털산업정보학회논문지
• /
• 제7권2호
• /
• pp.1-8
• /
• 2011

In this study, software products developed in the course of testing, software managers in the process of testing software test and test tools for effective learning effects perspective has been studied using the NHPP software. The finite failure non-homogeneous Poisson process models presented and the life distribution applied extreme distribution which used to find the minimum (or the maximum) of a number of samples of various distributions. Software error detection techniques known in advance, but influencing factors for considering the errors found automatically and learning factors, by prior experience, to find precisely the error factor setting up the testing manager are presented comparing the problem. As a result, the learning factor is greater than automatic error that is generally efficient model could be confirmed. This paper, a numerical example of applying using time between failures and parameter estimation using maximum likelihood estimation method, after the efficiency of the data through trend analysis model selection were efficient using the mean square error.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.199-202
• /
• 2005

High speed milling process is emerging as an important fabrication process benefits include the ability to fabricate micro and meso-scale parts out of a greater range of materials and with more varied geometry. It also enables the creation of micro and meso-scale molds for injection molding. Factors affecting surface roughness have not been studied in depth for this process. A series of experiments has been conducted in order to begin to characterize the factors affecting surface roughness and determine the range of attainable surface roughness values for the high speed milling process. It has previously been shown that run-out creates a greater problem for the dimensional accuracy of parts created by high speed milling process. And run-out also has a more significant effect on the surface quality of milled parts. The surface roughness traces reveal large peak to valley variations. This run-out is generated by spindle dynamics and tool geometry. In order to investigate the relationship between tool setting errors and surface roughness end tilted mills were used to cut aluminum samples. The results indicate that tool setting errors have significant effects on surface roughness and cutting forces.