• 재활복지공학회논문지
• /
• 제11권1호
• /
• pp.29-35
• /
• 2017

기존의 가정용 요양침대는 매트리스 지지판(mattress support platform) 하부에 설치된 복잡한 기구부로 인해 저상화 실현이 어려웠다. 본 논문에서는 등판과 다리판의 각도를 조절하면서도 저상화가 가능한 요양침대의 구동 메커니즘을 제안한다. 등판과 다리판의 메커니즘은 듀얼 모터(dual motor)를 적용하고, 최적화 기법으로 설계변수를 결정하였다. 승강 메커니즘은 풀리(pulley)구조를 적용하여 제한된 구동기의 가동범위를 최대 두 배까지 높일 수 있도록 설계하였다. 건강한 5명의 피험자($24.4{\pm}0.5$세)가 방바닥에서 240mm의 저상 프로토타입 요양침대와, 600mm의 일반적인 높이의 침대에 올라갈 때의 그 이동 거리를 측정하여 저상화 침대에 대한 유효성을 평가하였다. 그 결과 저상 요양침대를 사용할 때의 이동 거리는 기존 높이의 침대에 비해 평균 38% 작았다. 이것은 저상요양침대가 고령자의 신체적 부담을 줄여주며, 일반침대보다 일상생활 지원에 효과적이라는 것을 보여주었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제19권1호
• /
• pp.25-34
• /
• 1997

This study was made with lateral cephalometric radiography of 28 skeletal class III malocclusion patients that were performed to setback surgery of mandible. The 28 patients were selected by four standards as follows. 1) Set-back amount of mandible is below 10 mm 2) No extrusion and intrusion of posterior tooth or alteration of interincisial angle at period of postoperative orthodontic treatment. 3) Change of mesial segment location of mandible on lateral cephalometrics 4) No genioplasty And 28 patients were divided to three group(1,2,3 group) by degree of preoperative occlusal plane angle to Burstone's horizontal plane. The preoperative occlusal plane angle, which of 1 group was smaller than $7^{\circ}$ and 2 group was between $7^{\circ}$ to $15^{\circ}$ and 3 group was larger than $15^{\circ}$. The results were as follows : 1. As the preoperative occlusal plane angle was larger, the degree of mandibular prognathism was not severe. 2. On comparsion of preoperative and immediate postoperative cephalometric analysis, specific relationship of occlusal plane angle and set-back amount of mandible was not present. 3. As the preoperative occlusal plane angle was smaller, the alteration of postoperative occlusal plane angle was increased tendency. As the preoperative occlusal plane angle was larger, the alteration of postoperative occlusal plane angle was decreased tendency. 4. The relapsed degree of B point distance to Vertical plane was not relationship to the degree of preoperative occlusal plane angle.

• 한국지반공학회논문집
• /
• 제17권3호
• /
• pp.83-94
• /
• 2001

본 연구에서는 상.하단으로 구분된 2개의 동일한 보강토옹벽에 대해서 상호 이격거리에 따른 수치해석을 수행하여 전면벽체의 수평변위, 전면벽체 배면의 수평토압, 보강토체 배면의 수평토압 그리고 보강재의 최대인장력 분포 및 크기변화 양상 등 다단식 보강토옹벽의 거동을 살펴보았다. 또한, 하단 옹벽에 증가되는 응력을 산정하고자 중첩의 원리를 적용한 2:1 응력분포법을 제시하였다. 수치해석 결과 이격거리가 증가함에 따라 상단옹벽이 하단옹벽에 미치는 영향이 감소하였으며 하단 옹벽 높이의 두배 이상 이격시, 상호 거동은 독립옹벽으로 거동하였다. 하단 옹벽내 응력 산정방법에 있어서 NCMA의 방법이 가장 보수적인 결과를 보였으며 본 연구에서 제시한 2:1 응력분포법중 주동파괴면을 고려하지 않은 방법이 수치해석 결과와 가장 유사하게 나타났다.

• 한국의류산업학회지
• /
• 제17권3호
• /
• pp.447-461
• /
• 2015

The purpose of this study is to develop a torso pattern that is highly representative for the proper body shape of women in their thirties. Size data of the women with age of 30 through 39 from the database of Size Korea 2004 were used for the study. In order to develop a master pattern which will be used as the benchmark for grading of research group, 4 existing torso block drafting methods were compared based on the data gathered and the block with the highest evaluation score was utilized as a reference point. For the analysis, data was divided into four types, only the data of 138 subjects which were evaluated at least by four or more experts as valid were used for the study. The major results can be summarized as follow. The women of bust girth of 91cm and height of 160cm which was turned out to be representative type of research group were used as standard measurement for the purpose of reflecting not only curve length of the 3D analysis measurement but also the difference between front and back thickness to the pattern. Dart locations were set based on front and back torso ease, shoulder area revisions, front sagging length 1.5cm and cross section crevice length analysis. According to the experts' appearance evaluation of the pattern was found to be better than the control pattern which was regarded as the best among 4 patterns created based on existing torso block drafting methods.

• 구강회복응용과학지
• /
• 제22권4호
• /
• pp.271-281
• /
• 2006

Long term prediction of surgical result of skeletal class III has not been evaluated adequately because the stability of orthognathic surgery would be affected by not only set back amount of mandible but also many other factors like skeletal pattern, hyoid position, and airway size. The aimof this study is to discriminate the factors which affect the stability of post-treatment result of surgical outcome of sagittal split ramus osteotomy. We have collected 37 patients (male: 17, female: 20) from patients who have been treated at Orthodontic Department in Dankook University. The patients underwent 3 times Cephalometric X-ray taking at pre-, post-orthognathic surgery and after 12 months retention. The subjects were divided into 2 groups (Stable group: 21, Relapse group: 16) according to their relapse amount. We have taken following results from Students t-test and discriminant analysis. The discriminant factors which discern relapse and stable groupe among treatment change variables were BX and Ba-HY. Hyoid bone moved to posterior and inferior position due to surgery and repositioned superiorly and posteriorly during retention period. Skeletal patterns of the relapse group are smaller mandibular plane angle, anterior mandibular position, and greater distance from hyoid bone to cervical bone and mandible respectively.

• Journal of Welding and Joining
• /
• 제13권4호
• /
• pp.122-131
• /
• 1995

An automatic welding equipment for thick plates requires the capability of the seam tracking of the weld line which often includes misalignment of the workpiece and variation of groove width. In this study, an automatic welding equipment and control algorithms based on the arc sensor were proposed for the GMA welding of thick plates which had misalignment and gap variation. The developed system being constituted with 5 axis can be automatically controlled by computer and also automnatically set the welding conditions such as welding current, and voltage. The proposed algorithms for the seam tracking in multi-pass welding of the thick plates were constituted as follows : the detection of weaving-end point for findng the variation of groove width, the control of welding velocity for acquiring a constant thickness deposition of weld metal, and the calculation of groove width and height of an arbitrary pass in the multi-pass weld. As results of the application of the system, it was revealed that the system had a good capability in seam tracking and made an excellent weld quality in V groove butt joint.

• Transactions on Electrical and Electronic Materials
• /
• 제8권6호
• /
• pp.268-273
• /
• 2007

In this study, It was studied about the luminance characteristics of 17 inch direct-type back light using EEFL(external electrode fluorescent lamp) and CCFL(cold cathode fluorescent lamp). The EEFL has a long life time because the electrode is installed outside of lamp. And it is produced in lower price than conventional CCFL. Moreover, it does not need process of installing internal electrode. However, the EEFL technology has several problems such as difficulty of designing driving inverter and preventing this phenomenon along the skin of lamps. We suggested two types of backlight unit for LCD TV application using the EEFL and the CCFL. We found optimized optical design parameters. We set the optical variation parameters such as lamp height, lamp distance, total thickness, and angles of inner walls. We achieved 7580 nits of center luminance, 82% of luminance uniformity by using 20 lamps of the EEFL and 7297 nits of center luminance, 78% of luminance uniformity by using 16 lamps of the CCFL.

• 한국자기공명학회논문지
• /
• 제24권4호
• /
• pp.136-142
• /
• 2020

Apolipoprotein B-100 (apo B-100), the main protein component that makes up LDL (Low density lipoprotein), consists of 4,536 amino acids and serves to combine with the LDL receptor. The oxidized LDL peptides by malondialdehyde (MDA) or acetylation in vivo were act as immunoglobulin (Ig) antigens and peptide groups were classified into 7 peptide groups with subsequent 20 amino acids (P1-P302). The biomimetic peptide P99 (KGTYG LSCQR DPNTG RLNGE) out of B-group peptides carrying the highest value of IgM antigens were selected for structural studies that may provide antigen specificity. Circular Dichroism (CD) spectra were measured for peptide secondary structure in the range of 190-260 nm. Experimental results show that P99 has pseudo α-helice and random coil structure. Homonuclear (COSY, TOCSY, NOESY) 2D-NMR experiments were carried out for NMR signal assignments and structure determination for P99. On the basis of these completely assigned NMR spectra and proton distance information, distance geometry (DG) and molecular dynamic (MD) were carried out to determine the structures of P99. The proposed structure was selected by comparisons between experimental NOE spectra and back-calculated 2D NOE results from determined structure showing acceptable agreement. The total Root-Mean-Square-Deviation (RMSD) value of P99 obtained upon superposition of all atoms were in the set range. The solution state P99 has mixed structure of pseudo α-helix and β-turn(Gln[9] to Thr[13]). These NMR results are well consistent with secondary structure from experimental results of circular dichroism. Structural studies based on NMR may contribute to the prevent oxidation studies of atherosclerosis and observed conformational characteristics of apo B-100 in LDL using monoclonal antibodies.

• 한국자기공명학회논문지
• /
• 제25권4호
• /
• pp.58-63
• /
• 2021

Apolipoprotein B-100 (apo B-100), the main protein component that makes up LDL (Low density lipoprotein), consists of 4,536 amino acids and serves to combine with the LDL receptor. The oxidized LDL peptides by malondialdehyde (MDA) or acetylation in vivo act as immunoglobulin (Ig) antigens and peptide groups were classified into 7 peptide groups with subsequent 20 amino acids (P1-P302). The biomimetic peptide P143 (IALDD AKINF NEKLS QLQTY) out of C-group peptides carrying the highest value of IgG antigens were selected for structural studies that may provide antigen specificity. Experimental results show that P143 has β-sheet in Ile[1]-Asn[9] and α-helice in Gln[16]-Tyr[20] structure. Homonuclear 2D-NMR (COSY, TOCSY, NOESY) experiments were carried out for NMR signal assignments and structure determination for P143. On the basis of these completely assigned NMR spectra and proton distance information, distance geometry (DG) and molecular dynamic (MD) were carried out to determine the structures of P143. The proposed structure was selected by comparisons between experimental NOE spectra and back-calculated 2D NOE results from determined structure showing acceptable agreement. The total Root-Mean-Square-Deviation (RMSD) value of P143 obtained upon superposition of all atoms were in the set range. The solution state P143 has a mixed structure of pseudo α-helix and β-turn(Phe[10] to Glu[12]). These results are well consistent with calculated structure from experimental data of NOE spectra. Structural studies based on NMR may contribute to the prevent oxidation studies of atherosclerosis and observed conformational characteristics of apo B-100 in LDL using monoclonal antibodies.

• 한국의학물리학회지:의학물리
• /
• 제24권4호
• /
• pp.253-258
• /
• 2013

본 연구의 목적은 electronic portal imaging device (EPID)를 통하여 방사선 치료를 받는 환자로부터 투과해 나오는 선량으로 외부적인 선량 재구성과 몬테카를로 전산모사로부터 도출되는 내부 선량 계측과의 관계를 도출하고 이를 분석하기 위한 연구로 진행되었다. 본 연구는 전산모사 연구로써 두 가지의 경우를 비교 분석하고 이와 비슷한 연구에 대한 기본적인 지표를 제공하고자 시행되었다. 실험에 관한 기하학적 정보와 방사선 소스에 대한 정보를 몬테카를로 전산모사 툴인 Monte Carlo n-particle (MCNPX)에 입력하였고 EPID 이미지 도출을 위하여 MCNPX 내에 tally카드를 이용하여 선량정보를 도출하고 이를 영상화 할 수 있도록 하였다. 또한 내부적인 계측을 위하여 물 팬텀을 소스와 표면의 거리(source to surface distance, SSD)가 100 cm이 되도록 설정하였으며, 그보다 10 cm 아래에 EPID를 위치시켰다. 내부 계측은 물팬텀 자체에서 흡수되는 흡수 선량을 mesh tally로 수집하였고, 4문 조사를 통하여 중첩된 선량에 대한 데이터를 획득하였다. 그와 동시에 EPID에서 물을 투과해 나오는 선량을 획득 한 뒤 역 투사 방법을 사용하여 선량 재구성을 하였다. 이둘의 경우를 비교하기 위해 자체적인 교정(calibration)을 통하여 투과해 나온 선량과 흡수된 선량과의 관계를 비교하고 4문 조사를 통하여 물 팬텀 내의 특정 부분에 대한 중첩된 선량 데이터와 EPID를 통해 재구성한 선량 데이터를 분석하였다. 물 팬텀과 EPID에서 획득한 누적 선량의 합은 각각 평균 3.4580 MeV/g과 3.4354 MeV/g이었다. 이는 앞서 계측된 물 팬텀 내부의 누적 선량과 0.6536% 선량 오차를 보였다.