• 제목/요약/키워드: Set Covering Optimization

검색결과 16건 처리시간 0.022초

최적화에 근거한 LAD의 패턴생성 기법 (Optimization-Based Pattern Generation for LAD)

  • 장인용;류홍서
    • 한국경영과학회:학술대회논문집
    • /
    • 한국경영과학회 2005년도 추계학술대회 및 정기총회
    • /
    • pp.409-413
    • /
    • 2005
  • The logical analysis of data(LAD) is an effective Boolean-logic based data mining tool. A critical step in analyzing data by LAD is the pattern generation stage where useful knowledge and hidden structural information in data is discovered in the form of patterns. A conventional method for pattern generation in LAD is based on term enumeration that renders the generation of higher degree patterns practically impossible. In this paper, we present a new optimization-based pattern generation methodology and propose two mathematical programming medels, a mixed 0-1 integer and linear programming(MILP) formulation and a well-studied set covering problem(SCP) formulation for the generation of optimal and heuristic patterns, respectively. With benchmark datasets, we demonstrate the effectiveness of our models by automatically generating with much ease patterns of high complexity that cannot be generated with the conventional approach.

  • PDF

클래스 영역의 다차원 구 생성에 의한 프로토타입 기반 분류 (Prototype based Classification by Generating Multidimensional Spheres per Class Area)

  • 심세용;황두성
    • 한국컴퓨터정보학회논문지
    • /
    • 제20권2호
    • /
    • pp.21-28
    • /
    • 2015
  • 본 논문에서는 최근접 이웃 규칙을 이용한 프로토타입 선택 기반 분류 학습을 제안하였다. 각 훈련 데이터가 대표하는 클래스 영역을 구(sphere)로 분할하는데 최근접 이웃 규칙을 적용시키며, 구의 내부는 동일 클래스 데이터들만 포함하도록 한다. 프로토타입은 구의 중심점이며 프로토타입의 반지름은 가장 인접한 다른 클래스 데이터와 가장 먼 동일 클래스 데이터의 중간 거리 값으로 결정한다. 그리고 전체 훈련 데이터를 대표하는 최소의 프로토타입 집합을 선택하기 위해 집합 덮개 최적화를 이용하여 프로토타입 선택 문제를 변형시켰다. 제안하는 프로토타입 선택 방법은 클래스 별 적용이 가능한 그리디 알고리즘으로 설계되었다. 제안하는 방법은 계산 복잡도가 높지 않으며, 대규모 훈련 데이터에 대한 병렬처리의 가능성이 높다. 프로토타입 기반 분류 학습은 선택된 프로토타입 집합을 새로운 훈련 데이터 집합으로 사용하고 최근접 이웃 규칙을 적용하여 테스트 데이터의 클래스를 예측한다. 실험에서 제안하는 프로토타입 기반 분류기는 최근접 이웃 학습, 베이지안 분류 학습과 다른 프로토타입 분류기에 비해 일반화 성능이 우수하였다.

ASSESSING CALIBRATION ROBUSTNESS FOR INTACT FRUIT

  • Guthrie, John A.;Walsh, Kerry B.
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1154-1154
    • /
    • 2001
  • Near infra-red (NIR) spectroscopy has been used for the non-invasive assessment of intact fruit for eating quality attributes such as total soluble solids (TSS) content. However, little information is available in the literature with respect to the robustness of such calibration models validated against independent populations (however, see Peiris et al. 1998 and Guthrie et al. 1998). Many studies report ‘prediction’ statistics in which the calibration and prediction sets are subsets of the same population (e. g. a three year calibration validated against a set from the same population, Peiris et al. 1998; calibration and validation subsets of the same initial population, Guthrie and Walsh 1997 and McGlone and Kawano 1998). In this study, a calibration was developed across 84 melon fruit (R$^2$= 0.86$^{\circ}$Brix, SECV = 0.38$^{\circ}$Brix), which predicted well on fruit excluded from the calibration set but taken from the same population (n = 24, SEP = 0.38$^{\circ}$Brix with 0.1$^{\circ}$Brix bias), relative to an independent group (same variety and farm but different harvest date) (n = 24, SEP= 0.66$^{\circ}$ Brix with 0.1$^{\circ}$Brix bias). Prediction on a different variety, different growing district and time was worse (n = 24, SEP = 1.2$^{\circ}$Brix with 0.9$^{\circ}$Brix bias). Using an ‘in-line’ unit based on a silicon diode array spectrometer, as described in Walsh et al. (2000), we collected spectra from fruit populations covering different varieties, growing districts and time. The calibration procedure was optimized in terms of spectral window, derivative function and scatter correction. Performance of a calibration across new populations of fruit (different varieties, growing districts and harvest date) is reported. Various calibration sample selection techniques (primarily based on Mahalanobis distances), were trialled to structure the calibration population to improve robustness of prediction on independent sets. Optimization of calibration population structure (using the ISI protocols of neighbourhood and global distances) resulted in the elimination of over 50% of the initial data set. The use of the ISI Local Calibration routine was also investigated.

  • PDF

유전자 알고리즘을 이용한 한국형 미사일 방어체계 최적 배치에 관한 연구 (A Study on the Optimal Allocation of Korea Air and Missile Defense System using a Genetic Algorithm)

  • 윤승환;김수환
    • 한국군사과학기술학회지
    • /
    • 제18권6호
    • /
    • pp.797-807
    • /
    • 2015
  • The low-altitude PAC-2 Patriot missile system is the backbone of ROK air defense for intercepting enemy aircraft. Currently there is no missile interceptor which can defend against the relatively high velocity ballistic missile from North Korea which may carry nuclear, biological or chemical warheads. For ballistic missile defense, Korea's air defense systems are being evaluated. In attempting to intercept ballistic missiles at high altitude the most effective means is through a multi-layered missile defense system. The missile defense problem has been studied considering a single interception system or any additional capability. In this study, we seek to establish a mathematical model that's available for multi-layered missile defense and minimize total interception fail probability and proposes a solution based on genetic algorithms. We perform computational tests to evaluate the relative speed and solution of our GA algorithm in comparison with the commercial optimization tool GAMS.

미사일 방어를 위한 방공포대 최적 배치 문제 (The Optimal Deployment Problem of Air Defense Artillery for Missile Defense)

  • 김재권;설현주
    • 산업경영시스템학회지
    • /
    • 제39권1호
    • /
    • pp.98-104
    • /
    • 2016
  • With the development of modern science and technology, weapon systems such as tanks, submarines, combat planes, radar are also dramatically advanced. Among these weapon systems, the ballistic missile, one of the asymmetric forces, could be considered as a very economical means to attack the core facilities of the other country in order to achieve the strategic goals of the country during the war. Because of the current ballistic missile threat from the North Korea, establishing a missile defense (MD) system becomes one of the major national defense issues. This study focused on the optimization of air defense artillery units' deployment for effective ballistic missile defense. To optimize the deployment of the units, firstly this study examined the possibility of defense, according to the presence of orbital coordinates of ballistic missiles in the limited defense range of air defense artillery units. This constraint on the defense range is originated from the characteristics of anti-ballistic missiles (ABMs) such as PATRIOT. Secondly, this study proposed the optimized mathematical model considering the total covering problem of binary integer programming, as an optimal deployment of air defense artillery units for defending every core defense facility with the least number of such units. Finally, numerical experiments were conducted to show how the suggested approach works. Assuming the current state of the Korean peninsula, the study arbitrarily set ballistic missile bases of the North Korea and core defense facilities of the South Korea. Under these conditions, numerical experiments were executed by utilizing MATLAB R2010a of the MathWorks, Inc.

천연가스 액화공정의 최적설계 (Optimal Design of Natural Gas Liquefaction Processes)

  • 조현준;여영구;김진국
    • Korean Chemical Engineering Research
    • /
    • 제51권1호
    • /
    • pp.25-34
    • /
    • 2013
  • 본 총설에서는 천연가스 액화공정의 최적설계에서 에너지 효율을 높이기 위해 고려해야 하는 주요 공정설계 인자들에 대한 논의와 상용 LNG 플랜트에서 이러한 인자들이 어떻게 적용되고 있는지에 대하여 살펴보았다. 압축기에서 소모되는 축일의 양을 최소화하기 위한 방법으로서 단일 냉매를 사용하는 냉각 사이클을 다단, 혹은 중첩 구조로 설계하여 온도 범위가 넓은 영역에서 운용하는 방법과 혼합냉매를 사용하여 단순한 사이클 구조를 유지하면서 최적 냉각공급 곡선을 유지하는 방법을 다루었고, 천연가스 액화조건에 맞추어 이러한 구조들의 최적 조합을 구성하는 원리를 소개하였다. 열 통합(heat integration) 기법을 활용하여 상용화 공정들의 특징을 도식적으로 고찰하였으며 아울러 에너지 효율 및 경제성에 대한 분석을 수행하였다. 또한 액화 공정 설계에서 사용되는 대용량의 압축기들을 구동하는 에너지 시스템에 대한 설계 문제를 살펴보았으며 최적설계를 위한 여러 가지 요소들을 고찰하여 보았다.