• 한국정밀공학회지
• /
• 제16권1호통권94호
• /
• pp.42-48
• /
• 1999

A control method for a robot hand grasping a object in a partially unknown environment will be proposed, where a proximate sensor detecting the distance between the fingertip and object was used. Particularly, the finger joints were driven servo-pneumatically in this study. Based on the proximate sensor signal the finger motion controller could plan the grasping process divided in three phases ; fast aproach, slow transitional contact and contact force control. That is, the fingertip approached to the object with full speed, until the output signal of the proximate sensor began to change. Within the perating range of the proximate sensor, the finger joint was moved by a state-variable feedback position controller in order to obtain a smooth contact with the object. The contact force of fingertip was then controlled using the blocked-line pressure sensitivity of the flow control servovalve for finger joint control. In this way, the grasping impact could be reduced without reducing the object approaching speed. The performance of the proposed grasping method was experimentally compared with that of a open loop-controlled one.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2640-2642
• /
• 2005

Servovalves are widely used in industrial areas in order to control the position of large steam valves which regulate steam flow to prime mover. We must control the position of large steam valves to regulate flow of working fluids in the process. The small pilot valves are used to regulate the large main valves in case that the pressure of control fluids supplied to servovalves is low about $12kg/cm^2$. But, in case that the pressure of control fluids supplied to servovalves is high enough about $110kg/cm^2$, the pilot valves are not needed and servovalves can control directly the large main valves due to its large working forces. Additionally, the basic structures of armature coil should be different according to the types of control system even in the same servovalve. This paper compares and describes some integral types of flow control.

• 한국항공우주학회지
• /
• 제34권9호
• /
• pp.76-81
• /
• 2006

본 논문에서는 공기흡입식 추진기관용 연료공급 시스템의 연료조절 밸브 시스템을 제안하였으며, 제안된 시스템은 서보밸브에 의해 구동되는 차압유지 밸브와 미터링 밸브로 구성되어 있다. 시스템 성능 및 안정성에 영향을 미치는 인자를 찾기 위해 비선형 및 선형 해석을 수행하였다. 이를 통해 미터링 밸브 오리피스 양단의 차압 유지량 ${\Delta}P$가 시스템 안정성에 영향을 미침을 예측하였고 실험 및 비선형 전산모사를 통하여 입증하였다. 해석 및 실험 결과차압 유지량 ${\Delta}P$를 줄이고 동시에 이등변 삼각형 형상의 오리피스를 차압유지 밸브에 적용함으로써 요구 유량에 따라 유량이득이 조절되도록 하여 시스템의 안정성을 높일 수 있었다.