• Journal of the Korean Society of Safety
• /
• v.16 no.2
• /
• pp.27-35
• /
• 2001

For the purpose of healing the degradation part, $CO_2$ laser beam was irradiated with different irradiation condition (porer, diameter, velocity and beam type) to find out optimum irradiation condition. The test series of hardness, residual stress measurement, and fatigue were carried out after the irradiation. Experimental results show that micro-hardness values on the surface of the irradiated specimens m approximately 2.5 times higher than those of un-irradiated ones. Fatigue tests show that the fatigue life was improved by the compressive residual stress after laser beam irradiation. However, some specimens with different conditions show the shorter fatigue life. It means that laser beam irradiation with optimum irradiation condition and optimum absorb energy, Q can improve the fatigue strength.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.286-291
• /
• 2000

The reactor pressure vessel is usually cladded with stainless steel to prevent corrosion and radiation embrittlement, and number of subclad cracks have been found during an in-service-inspection. Therefore assessment for subclad cracks should be made for normal operating conditions and faulted conditions such as PTS. Thus, in order to find the optimum fracture assessment procedures for subclad cracks under a pressurized thermal shock condition, in this paper, three different analyses were performed, ASME Sec. XI code analysis, an LEFM(Liner elastic fracture mechanics) analysis and an EPFM(Elastic plastic fracture mechanics) analysis. The stress intensity factor and the Maximum $RT_{NDT}$ were used for characterizing. Analysis based on ASME Sec. XI code does not completely consider the actual stress distribution of the crack surface, so the resulting Maximum allowable $RT_{NDTS}$ can be non-conservative, especially for deep cracks. LEFM analysis, which does not consider elastic-plastic behavior of the clad material, is much more non-conservative than EPFM analysis. Therefore, It is necessary to perform EPFM analysis for the assessment of subclad cracks under PTS.

• Journal of Applied Reliability
• /
• v.15 no.3
• /
• pp.154-162
• /
• 2015

We have performed accelerated photo-degradation test using a 10-Sun level high irradiance $Weather-Ometer^{(R)}$ (10-Sun Ci5000) in an attempt to study acceleration and correlation between accelerated and service conditions for ink-jet ink. The accelerated test was used to predict lifetimes of ink-jet ink through the calculation of scaling factor for intensity of irradiance and duration of usage combined with estimation of lifetime distribution and inverse power model as a life-stress model. The lifetimes and acceleration factors for foreign and domestic inks were compared with each other. The results showed that the failure mechanisms and life-stress models for ink-jet ink were different among the color of ink which means that we might be in need of further study by color of inks.

• Health Policy and Management
• /
• v.2 no.2
• /
• pp.221-237
• /
• 1992

The reasons for cost inflation in medical insurance expenditure are classified into demand pull inflation and cost push inflation. The former includes increase in the number of beneficiaries and utilization rate, while the latter includes increase in medical insurance fee and the charges per case. This study was conducted to analyze sources of increases of expenditure in medical insurance demonstration area by the period of 1982-1987 which was earlier than national health insurance and the period of national health insurance(1988-1990). The major findings were as follows: Medical expenditure in these areas increased by 9.4%(15.1%) annually between 1982 and 1990 on the basis of costant price(current price) and for this period, the yearly average increasing rate of expenses for outpatient care[10.5%(15.8%)] was higher than that of inpatient care [7.3%(12.6%)]. Medical expenditure increased by 6.3%(8.9%) annually between 1982 and 1987, the period of medical insurance demonstration, while it increased by 10.7%(18.9%) after implementing national health insurance(1988-1990). Medical expenditure increased by 35.9%(45.9%) between 1982 and 1987. Of this increase, 115.2%(92.1%) was attributable to the increase in the frequencies of utilization per beneficiary and 61.0%(68.1%) was due to the increase in the charges per case, but the expenditure decreased by 76.2%(60.2%) due to the reduction in the number of beneficiaries. Beteen 1988 and 1990, the period of national health insurance, medical expenditure increased by 21.2%(41.4%). Of this increase, 87.5%(46.4%) was attributable to the increase in the frequencies of utilization per beneficiary and 52.4%(73.4%) was due to the increase in the charges per case, and of the increase in the charges per case, 69.6%(40.8%) was attributable to the increase in the days of visit per case. Medical expenses per person in these areas increased by 78.2%(89.0%) between 1982 and 1987. Of this increase, 76.6%(69.1%) was attributable to the increase in the frequencies of utilization per beneficiary and 23.4%(30.9%) was due to the increase in the charges per case. For this period, demand-pull factor was the major cause of the increase in medical expenses and the expenses per treatment day was the major attributable factor in cost-push inflation. Betwee 1988 and 1990, medical expenditure per person increased by 31.2%(53.1%). Of this increase, 60.8%(37.2%) was attributable to the demand-pull factor and 39.2%(62.8%) was due to the increase in the charges per case which was one of cost-push factors. In current price, the attributalbe rate of the charges per case which was one of cost-push factors was higher than that of utilization rate in the period of national health insurance as compared to the period of medical insurance demonstration. In consideration of above findings, demand-pull factor led the increase in medical expenditure between 1982 and 1987, the period of medical insurance medel trial, but after implementing national health insurance, the attributable rate of cost-push factor was increasing gradually. Thus we may conclude that for medical cost containment, it is requested to examine the new reimbursement method to control cost-push factor and service-intensity factor.

• The Korean Journal of Community Living Science
• /
• v.20 no.2
• /
• pp.263-274
• /
• 2009

The objective of this study is to verify work satisfaction of school food-service employee, of their job characteristics. Subjects were comprised 9 elementary schools, 11 middle schools, and 3 high schools in Ansan city. Data were analyzed 203 questionnaires for frequency, means, one-way ANOVA, $Scheff{\acute{e}}$ test, t-test, and Pearson correlation using SPSS PC Package. Most of the respondents were high school graduate(91.1%), under one million won salary(41.9%), and non license holder(60.6%). Working conditions were part-time job(41.9%), unlimited contractors(51.2%), and 3-5 years of working experience(21.7%). Measure of overall job satisfaction by Likert-type 5 scale, satisfaction of work operation attitude was 3.55 points and work characteristic duty of 4.32 points. The certificate qualified and elementary school's working posture were more satisfied their work attitude than other groups(p<0.05). Salary satisfaction score showed 2.64 points, but the work esteem satisfaction showed 3.34 points. The factor of working circumstance and potentiality satisfaction was only 2.61 points, but interpersonal connection and communication satisfaction was 3.50 points. Between job satisfactions factors, they were highly correlated with each other. The pride and characteristic duty of the work showed the strongest correlated(p<0.001). The satisfaction score of work operation attitude were significantly correlated with characteristic duty(p<0.001), work esteem, interpersonal relationships and communication(p<0.01). With this results, work satisfaction of food service employees showed a relatively high to perform a job task characteristics and work attitudes. However, the working environment and growth in salaries satisfaction were low. A set of duties must be paid according to the labor intensity. As removing the disturbing factors, the improvement in the quality of the feed will be able to expect substantial effects.

• Journal of the Korean Institute of Gas
• /
• v.25 no.6
• /
• pp.53-65
• /
• 2021

While the hydrogen refueling station is rapidly expanded and installed, the safety inspection of the hydrogen pressure vessel in the station should be very important. Of these, according to ASME, hydrogen embrittlement tests must be performed for hydrogen vessel that store hydrogen above a certain pressure. The main test method for hydrogen embrittlement inspection is to carry out fracture tests and fatigue fracture tests in a high pressure hydrogen atmosphere, which allows the durability limit of the pressure vessel to be measured and the endurable limit to be determined in the hydrogen atmosphere. In detail, the critical crack depth can be calculated by the stress intensity factor(K), and the service life can be determined by da/dN (fatigue growth rate). API579-1/ ASME FFS-1 part 9 exemplifies the calculation method according to the mode of crack-like flaws, but for various shapes such as plates and cylinders, there are about 55 modes according to the shape and location of the crack. Due to the fairly complex formula, it is not easily accessible. In this study, we will show you how to calculate fracture mechanics numerically via Excel and VBA. In addition, this was applied to analyze the effects of the thickness and inner diameter of the pressure vessel on the service life.

• Agribusiness and Information Management
• /
• v.3 no.2
• /
• pp.43-62
• /
• 2011

The goal of this study is to determine, based on survey results, the underlying factors that affect the intention of the farmers who have not adopted the Hazard Analysis and Critical Control Points (HACCP) system for the rearing phase of pig production to adopt this system in the future. The research model for this study was con structed based on strategic contingency theory, the theory of the diffusion of innovation, and the technology acceptance model (TAM). Using structural equation modeling with partial least squares (PLS), this study analyzes the effects of the intensity of competition, the environmental uncertainty, the innovativeness and self-efficacy of the individual farmers, and the impact of the credibility of the Agricultural Technology Service Center (ATSC), which acts as the principal agent of technology dissemination and as a leader of change, on the perceived usefulness of technology and the farmers' intention to adopt the system. The results of the analysis are as follows. First, with regard to the underlying factors affecting the intention to adopt the new system, the intensity of competition within the industry and the institutional credibility of the ATSC were inferred to underlie the perceived usefulness. Second, institutional credibility has a positive impact on the perceived usefulness of the system, and the perceived usefulness, in turn, has a positive impact on the intention to adopt. The perceived ease of use also has a positive impact on the intention to adopt. Because the factor that has the biggest impact on the intention of a farm to adopt is the credibility of the ATSC, it is crucial for extension organizations, such as the ATSC, to make greater efforts to promote the expansion of the HACCP system. Because farmers feel that the implementation of the HACCP system is an instrumental strategy for coping with the high intensity of competition within the industry, they attempt to gain a competitive edge through the production of safe livestock products.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.8
• /
• pp.1277-1286
• /
• 2001

Aluminum 5052/Aramid Fiber Reinforced Plastic(Al5052/AFRP) laminates are applied to the fuselage-wing intersection. The Al5052/AFRP laminates suffer from the cyclic bending moment of variable amplitude during the service. Therefore, the influence of cyclic bending moment on the delamination and the fatigue crack propagation behavior in Al5052/AFRP laminate was investigated in this study. Al5052/AFRP laminate composite consists of three thin sheets of Al5052 and two layers of unidirectional aramid fibers. The cyclic bending moment fatigue tests were performed with five different levels of bending moment. The shape and size of the delamination zone formed along the fatigue crack between Al5052 sheet and aramid fiber-adhesive layer were measured by an ultrasonic C-scan. The relationships between da/dN and ΔK, between the cyclic bending moment and the delamination zone size, and between the fiber bridging mechanism and the delamination zone were studied. Fiber failures were not observed in the delamination zone in this study. It represents that the fiber bridging modification factor should turn out to increase and that the fatigue crack growth rate should decrease. The shape of delamination zone turns out to be semi-elliptic with the contour decreased non-linearly toward the crack tip.

• Journal of Environmental Health Sciences
• /
• v.26 no.3
• /
• pp.32-37
• /
• 2000

Nowadays, a new word called SBS(sick building syndrome) has been come into existence. At the point of time when an interest about indoor air pollution and, according to this, countermeasure plan are internationally. Moreover institutional countermeasure should be attended at national level since indoor air quality in public places where many people gather is directly connected with national health. Especially indoor pollution of indoor stadia where all sorts of sports are held can give rise to every kinds of respiratory ailments to players as well as audiences. So it is presented as a main factor that indoor space of stadia is crowded with players and audiences compared with other kinds of indoor space. Therefore, in this research to analyze pollution degree of indoor circumstance for gymnasium and exercising room of folk wrestling. basketball, judo, wrestling, hapkido, swordsmanship and boxing making indoor gymnasium and exercising room an object, when 7 items were measures such as thermocircumstance(temperature, relative humidity, air current, intensity of illumination), dust, carbon monoxide, and carbon dioxide being based on the indoor environmental standard of the first clause of Article 45 of public utilization service which is showed at public hygiene of the Ministry of Health and Social Affairs, it was showed that indoor temperature, relative humidity, air current and intensity of illumination were over standard amount at the most of folk wrestling gymnasium and exercising room. Indoor density of carbon monoxide was preserved to the extent of standard amount (10ppm) at all gymnasiums but carbon dioxide was not in excess of standard amount(1,000 ppm) at most of gymnasiums. Indoor density of dust induced from respiration exceeded the standard amount (150 $\mu\textrm{g}$/㎥) at all gymnasiums of the folk wrestling. Since the folk wrestling players and participants feel physical subjective symptom seriously, in other words the degree of indoor air pollution at gymnasiums and exercising rooms of the folk wrestling is very high, fundamental solution and countermeasure plan should be presented.

• Health Policy and Management
• /
• v.27 no.2
• /
• pp.177-185
• /
• 2017

Background: The mental problems of the elderly are at issue as a serious social phenomenon. The purpose of this study is to identify risk factors affecting the mood disorders of the elderly. Methods: The subjects were 1,779,236 aged ${\geq}65$ and participated in health screening. Dependent variable was mood disorders. Independent variables were consisted of community level (regional deprivation index and healthcare resources) and individual level (sex, age, insurance type, disability, smoking, alcohol, physical activity, body mass index, and healthcare utilization). Multilevel logistic regression was performed. Results: At the individual level, women, employed insured, severely disabled people, heavy alcohol drinkers, high-intensity physical activity, body mass index, and patients who had chronic disease and severe disease were significantly associated with mood disorders. As the age has increased, it has let increase of mood disorders. At the community level, as the regional deprivation index has increased by 1, mood disorders has been increased by 1.005 times. The intra-class coefficient was 7.04%. Conclusion: We found individual and community level factors are associated with mood disorders. Systematic approach is essential to reduce mood disorders.