• Journal of the Korean housing association
• /
• v.14 no.4
• /
• pp.57-67
• /
• 2003

The purpose of the study is to propose the basic data for an aged residential building suitable for Korean environment and it is based on the outcomes of investigation on The Aged Care Residential Service in Australia including the scale and arrangement of private zone and specific characteristics of each compartment. The brief outcomes of the research are follows as. - The Aged Care Residential Services have been functionally running divided into Nursing home, Hostel and Retirement Village by the classification standard of the residential classification scale. - Single bed rooms have 75% of total residential area and the square of single bed room is about $20\textrm{m}^2$and that of two-bed room is about $31\textrm{m}^2$. - There are two types of ensuite such as one single-bed room and one ensuite and bed room for two or three persons and ensuite type. The square of ensuite varies as single is 50∼60%, single for public is 25∼30%, and double for public is 15∼20%. - Assisted bathrooms are generally located in the middle of building and it is suggested to be occupied about $1.25\textrm{m}^2$ per person. Sitting rooms are two types such as room type whose square has about $12\textrm{m}^2$ and a lounge type has $16\textrm{m}^2$.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.6
• /
• pp.1-5
• /
• 2014

The following research was initiated in order to compare the relationship between the amount of gunfire shot and its resulting heavy metal pollution rate. The research was conducted at two firing ranges located inside a military unit stationed in the rear strategical area, where one full distance firing range is used by soldiers in active service, and the other is used by recruits and reserves. The heavy metal pollution rate was measured also on water sample collected from the target zone while raining. Based on values such as the real amount of gunshot fired, amount of heavy metal in the soil of the target zone, and the degree of heavy metal pollution for each firing range, the research showed that although pollution rate was higher when more gunshots were fired, there was no close correlation between the two. The water samples showed that this might result from the soils containing heavy metals eroded and transported by rain due to the target zone having no vegetation.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.3
• /
• pp.157-163
• /
• 2019

As the drone industry has grown greatly in recent years, drones are being used or developed in many industrial fields such as image shooting, pesticide application, delivery service, food delivery etc. In this paper, therefore, we developed a program that takes a user's desired area at a certain height using a camera-equipped drone and obtains the area of the zone the user wants through image processing. The first user selects an area or a path. Afterwards, the drone flies and takes pictures, and then measures the user's needs. A digital image taken at a constant height and with the same resolution is composed of pixels, the area can be calculated easily if we know the number of pixels in the zone the user wants. Particularly, it is easy to calculate the area of various shaped zones, not terrain shapes such as triangles and squares. In addition, the total area of specific places of the entire zone can be calculated. With the program of this paper, anyone can easily calculate the area of the place the user wants using a drone rather than calculating the area through difficult formulas or specialized equipment.

• Journal of Welding and Joining
• /
• v.15 no.1
• /
• pp.92-100
• /
• 1997

Weld repair of ASTM A-470 class 8 high pressure (HP) steam turbine rotor steel has been performed to extend the service life of older fossil units. Microhardness measurements were conducted across the weldment from unaffected base metal (BM) to weld metal (WM). The hardness of the BM was VHN 253, however it dropped up to VHN 227 at the heat affected zone (HAZ) close to unaffected BM for multipass SAW. This area of hardness drop is called "siftening zone" and has a width of 0.5-0.6mm. During creep rupture test, failure occurred around the softening zone and rupture time was 772.4hr at 19Ksi (132 Mpa) and 593.deg. C. Multipass MIG and TIG welding have been employed to reduce the softening zone width. The softening zone width for MIG was 0.3-0.4mm and for TIG was zero-0.4mm depending on heat inputs. However creep rupture time was decreased as softening zone width reduced. Creep rupture time also showed a close relationship with heat inputs in TIG process. The higher heat input, the longer rupture time. Most failure occurred at intercritical HAZ (ICHAZ), however rupture location was shifted to coarse grained HAZ (CGHAZ) as heat input decreased. The rupture surface showed tearing and dimple which indicated transgranular fracture. fracture.

• Journal of Korea Spatial Information System Society
• /
• v.8 no.2 s.17
• /
• pp.91-107
• /
• 2006

To handling the extreme situation that must manage positional information of a very large volume, at least millions of moving objects. A cluster-based sealable distributed computing system architecture, called the GALIS which consists of multiple data processors, each dedicated to keeping records relevant to a different geographical zone and a different time zone, was proposed. In this paper, we proposed a valid time management and time-zone shifting scheme, which are essential in realizing the long-term location data subsystem of GALIS, but missed in our previous prototype development. We explain how to manage valid time of moving objects to avoid ambiguity of location information. We also describe time-zone shifting algorithm with three variations, such as Real Time-Time Zone Shifting, Batch-Time Zone Shifting, Table Partitioned Batch-Time Zone Shifting, Through experiments related with query processing time and CPU utilization, we show the efficiency of the proposed time-zone shifting schemes.

• Journal of Korean Society of Transportation
• /
• v.36 no.2
• /
• pp.112-128
• /
• 2018

We are implementing pedestrian priority zone policy to certain districts to reduce greenhouse gas and to develop eco-friendly city which has more focus on pedestrians' walking environment. This policy has contributed to citizens' satisfaction level with improved public transportation service as well as more spacious streets for walk. Despite highly positive influence of pedestrian priority zone policy to the walking environment, we need to anticipate the impact of this to traffic environment as it may have bad effect to the overall traffic flow around the zone where the policy is implemented. This research has analyzed the change of characteristics of traffic accidents around the eco-traffic area of Hang-Gung dong, Suwon city, to understand impact of the pedestrian priority zone policy to the traffic surroundings, with pre-post analysis methodology. As a result, number of accidents related to pedestrians showed decrease as pedestrian priority zone is designed operated with focus to pedestrians. But accidents related illegal U-turn and violation of the traffic signal showed (significant) increase as there was a restriction of turns and decrease of overall traffic speed. To prevent the accidents above, we need to notice drivers to pay special attention before the pedestrian priority zone event, and information from this research should be given to the drivers through safety signs and mobile application at the place near to the event.

• Journal of the Korean association of regional geographers
• /
• v.4 no.1
• /
• pp.57-76
• /
• 1998

Yanji(延吉) city is the district seat of the Yanbian(延邊) Korean Autonomous District where is located in the Jilin(吉林) Province in China, and also the largest city with a population of three hundred sixty thousand, Since the mid-1980s, the inter-exchange and cooperation between Yanbian District and South Korea has been increased rapidly. That draw many scholars' attention to studying Yanbian District and Korean Chinese as a research theme for area studies. Unfortunately they neglect the study of the commerce and service industry in Yanbian city, which has indicated its rapid growth by the market economic policy of China, and an inter-exchange between Korean Chinese and Korean. The purpose of this study is to provide an information to many Korean potential investors for an investment strategy of the commerce and service industry in Yanji city. In order to do so, this study consists of three major steps. First of all. we analyzed the regional structure and locational characteristics of the commerce and service industry in Yanji City. Secondly, we investigated the characteristics of consumers behavior toward purchasing goods and service facilities. Finally, we supplied the proper businesses and location information for investment to Korean firms according to the results that identified above. In conclusion, we suggest that the proper businesses to invest are department store, retail clothing store, shoes store, cosmetics store, electronics and home appliances store, oversea branch offices of trading companies, Korean-style restaurant, hotel, nightclubs, Korean-style music room(Noraebang), travel agencies, beauty parlors, video rooms, electronic games, and so on. We also suggest that the proper locational areas to invest those businesses are the core area of the commerce and service industry in Yanji, where are Xinxing(新興) 3-zone and Jinxue(進學) 2-zone expressed in the Yanji city figure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.737-744
• /
• 2012

Recently VoIP has provided voice(both wired and wireless from IP-based) as well as the transmission of multimedia information. VoIP used All-IP type, Gateway type, mVoIP etc. Wired and wireless VoIP has security vulnerabilities that VoIP call control signals, illegal eavesdropping, service misuse attacks, denial of service attack, as well as wireless vulnerabilities etc. from WiFi Zone. Therefore, the analysis of security vulnerabilities in wired and wireless VoIP and hacking incidents on security measures for research and study is needed. In this paper, VoIP (All-IP type, and for Gateway type) for system and network scanning, and, IP Phone to get the information and analysis of the vulnerability. All-IP type and Gateway type discovered about the vulnerability of VoIP hacking attacks (Denial of Service attacks, VoIP spam attacks) is carried out. And that is a real VoIP system installed and operated in the field of security measures through research and analysis is proposed.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.1
• /
• pp.35-40
• /
• 2005

Recently, the location based service for moving customers is becoming one of the most important service in mobile communication area and for moving object applications, there are lots of update operations and such update loads are concentrated on some particular area unevenly. The primary processing of LBS application is spatio-temporal range queries and to improve the throughput of spatio-temporal range queries, the time of disk I/O in query processing should be reduced. In this paper, we adopt non-uniform two-level grid index structure, which are designed to minimize update operations. We propose query scheduling technique using spatial relationship and time relationship and a combined spatio-temporal query processing method using time zone concepts to improve the throughput of query processing. Some experimental results are shown for range queries with different query range to show the performance tradeoffs of the proposed methods.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.1 s.4
• /
• pp.21-30
• /
• 2004

This paper describes the design of RF link between RSE and OBU of ETCS and the analysis of the antenna beam pattern to get a proper communication area in the cross direction and traveling direction of lanes. This stage should be performed prior to determination of system requirements of ITS service based on active DSRC. This study is important and fundamental technical analysis to design and implement base station of ETCS.