• 한국공작기계학회논문집
• /
• 제10권3호
• /
• pp.61-67
• /
• 2001

The remaining life estimation for the aged component is very important because mechanical properties of the compo-nents are degraded with time of service exposure in high temperature etc. The destructive method is widely used for the estimation of material degradation, but it has a difficulty in preparing specimens from in-service industrial facilities. In order to evaluate the feasibility of ultrasonic evaluation method for properties of high temperature materials, 2.25Cr-1Mo steel specimens which were prepared by the isothermal aging heat treatment at 63$0^{\circ}C$ were evaluated by ultra-sonic measurements investigating the change of velocities and attenuation coefficient. In this results, attenuation coefficient was found to be sensitive to material degradation mainly attributed to the change of grain size and the precipitation of impurities in grain boundaries, but velocity was not for all specimens.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.183-186
• /
• 1999

Up to date, it is difficult to estimate the consistence of properties on the epoxy liner in service time because an estimation of the long term environment-deterioration with aging has not been processed. In the study, the estimation on epoxy liner is carried by the physical test 7 rounds. There are the elongation the and the crack bridging test in the part of physical tests. An elongation test is carried out with epoxy membrane and a crack bridging test is carried out with specimen painted epoxy on concrete. The subjects of test and estimation are a containment quality system and a fibre-glass reinforced system. The materials of these systems are a Robber added Epoxy, a Silica added Epoxy, and a Fiber reinforced Epoxy. Ensuring the test data, properties of epoxy liner was estimated and the change of properties was predicted on epoxy liners.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권4호
• /
• pp.1006-1025
• /
• 2012

Improving the quality of service in IP networks is a major challenge for real-time voice communications. In particular, packet arrival-delay variation, so-called "jitter," is one of the main factors that degrade the quality of voice in mobile devices with the voice-over Internet protocol (VoIP). To resolve this issue, a receiver-based enhanced timing recovery algorithm combined with active jitter estimation is proposed. The proposed algorithm copes with the effect of transmission jitter by expanding or compressing each packet according to the predicted network delay and variations. Additionally, the active network jitter estimation incorporates rapid detection of delay spikes and reacts to changes in network conditions. Extensive simulations have shown that the proposed algorithm delivers high voice quality by pursuing an optimal trade-off between average buffering delay and packet loss rate.

• 한국컴퓨터정보학회논문지
• /
• 제22권11호
• /
• pp.49-55
• /
• 2017

Recently, for safety of people, there are proposed so many technologies which detect density of people at the specific place or space. The representative technology for crowd density estimation was using image analysis method from CCTV images. However, this method had a weakness which could not be used and which's accuracy was lower at the dark or smog space. Therefore, in this paper, to solve this problem, we proposed a user density estimation system at closed space using high frequency and smart device. The system send inaudible high frequencies to smart devices and it count the smart devices which detect the high frequencies on the space. We tested real-time user density with the proposed system and ten smart devices to evaluate performance. According to the testing results, we confirmed that the proposed system's accuracy was 95% and it was very useful. Thus, because the proposed system could estimate about user density at specific space exactly, it could be useful technology for safety of people and measurement of space use state at indoor space.

• Journal of Computing Science and Engineering
• /
• 제5권1호
• /
• pp.85-110
• /
• 2011

Achieving situation awareness is especially challenging for real-time data stream applications because they i) operate on continuous unbounded streams of data, and ii) have inherent realtime requirements. In this paper we showed how formal data stream modeling and analysis can be used to better understand stream behavior, evaluate query costs, and improve application performance. We used MEDAL, a formal specification language based on Petri nets, to model the data stream queries and the quality-of-service management mechanisms of RT-STREAM, a prototype system for data stream management. MEDAL's ability to combine query logic and data admission control in one model allows us to design a single comprehensive model of the system. This model can be used to perform a large set of analyses to help improve the application's performance and quality of service.

• 한국정보과학회논문지:정보통신
• /
• 제33권6호
• /
• pp.420-427
• /
• 2006

무선인식(RFID) 시스템은 기존의 바코드 시스템을 대체할 뿐만 아니라 제조, 물류, 서비스 산업 등을 변화시킬 차세대 핵심 기술 중의 하나이다. RFID 시스템은 무선으로 초당 수 백개까지의 태그 정보를 인식할 수 있다. 태그 인식은 리더(reader)가 각 라운드 별로 정한 프레임 동안 태그들이 자신의 ID를 임의 전송함으로써 이루어진다. 태그 인식 시간을 감소시키려면 태그 수를 감안한 적절한 크기의 프레임을 할당해야 한다. 본 논문에서는 RFID 시스템에서 질의 시간을 최소화 할 수 있는 방법을 제안하였다. 먼저 태그 개수를 단순하면서도 효율적으로 추정하는 방법을 제안하고, 이를 이용하여 각 라운드 별로 최적 프레임 길이를 구하여 전체 질의 시간을 최소화하는 방법을 개발하였다. 기존에 제안된 방법과 성능 비교를 수행하여 본 논문에서 제안하는 태그 수 추정 방법이 기존 방법보다 더 정확하고 효율적임을 관찰하였고 최적 프레임 길이 결정 문제에 또한 간단한 Greedy방법이 복잡한 최적 프레임 계산기법과 비슷한 성능을 가진다는 것을 확인하였다.

• 대한물리치료과학회지
• /
• 제3권2호
• /
• pp.1065-1077
• /
• 1996

Fees for medical insurance services in Korea has not being been set based on service costing. Recently in the USA, fees for physican services are determined by developing and applying Resoure Based Relative Value Scales (RBRVS). This study attempts to develop relative value scales for personal factors of rehabilitative and physical therapeutic services. The personal factors were classified into four categories as having been done in the USA;service time, treatment technology and physical efforts, mental efforts and judgement, and stress. Input factors were measured using Magnitude Estimation Method (MEM), and relative value units were calculated for each of twenty eight rehabilitative and physical therapeutic services. Results show that service time surveyed differs from that provided in the public fee schedules in 24 services; the three personal factors but the service time are highly correlated; the physical therapists hold treatment technology and physical efforts to be the most important factor in setting the for services; and that relative values developed for noninsurance services such as Silver Spike Electrode (SSP) and Proprioceptive Neuromuscular Facilitation (PNF) are higher than those of similar insurance services. The policy implications and measures for improvement for the above findings were suggested respectively.

• 한국IT서비스학회지
• /
• 제15권1호
• /
• pp.197-210
• /
• 2016

With the advent of text analytics, VOC (Voice of Customer) data become an important resource which provides the managers and marketing practitioners with consumer's veiled opinion and requirements. In other words, making relevant use of VOC data potentially improves the customer responsiveness and satisfaction, each of which eventually improves business performance. However, unstructured data set such as customers' complaints in VOC data have seldom used in marketing practices such as predicting service time as an index of service quality. Because the VOC data which contains unstructured data is too complicated form. Also that needs convert unstructured data from structure data which difficult process. Hence, this study aims to propose a prediction model to improve the estimation accuracy of the level of customer satisfaction by combining unstructured from textmining with structured data features in VOC. Also the relationship between the unstructured, structured data and service processing time through the regression analysis. Text mining techniques, sentiment analysis, keyword extraction, classification algorithms, decision tree and multiple regression are considered and compared. For the experiment, we used actual VOC data in a company.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권9호
• /
• pp.4398-4417
• /
• 2017

Multi-user Multiple-Input and Multiple-Output (MU-MIMO) has potential for prominently enhancing the capacity of wireless network by simultaneously transmitting to multiple users. User selection is an unavoidable problem which bottlenecks the gain of MU-MIMO to a great extent. Major state-of-the-art works are focusing on improving network throughput by using Channel State Information (CSI), however, the overhead of CSI feedback becomes unacceptable when the number of users is large. Some work does well in balancing tradeoff between complexity and achievable throughput but is lack of consideration of fairness. Current works universally ignore the rational utilizing of time resources, which may lead the improvements of network throughput to a standstill. In this paper, we propose TOUSE, a scalable and fair user selection scheme for MU-MIMO. The core design is dynamic-time-warping-based user selection mechanism for downlink MU-MIMO, which could make full use of concurrent transmitting time. TOUSE also presents a novel data-rate estimation method without any CSI feedback, providing supports for user selections. Simulation result shows that TOUSE significantly outperforms traditional contention-based user selection schemes in both throughput and fairness in an indoor condition.

• 한국콘텐츠학회논문지
• /
• 제17권3호
• /
• pp.589-595
• /
• 2017

본 논문에서는 다양한 이동통신 서비스의 원활한 데이터 전송을 위한 적정 채널 용량의 산정 방법을 제시한다. 서비스 유형별 패킷 전송에 대한 허용 지연시간 기준을 모두 충족하기 위해서는 적정한 채널용량이 확보되어야 한다. 이러한 채널 산정 과정을 분석하기 위해 디지털 통신시스템의 이산시간 운영특성과 패킷 기반 트래픽의 집단 발생 상황을 $Geo^x$/G/1 비선점형 우선순위 대기행렬로 모델링하였다. 휴리스틱한 평균 대기시간 분석 방법을 이용하여 다양한 전송 우선순위를 갖는 서비스 유형별 평균 대기시간을 도출하였다. 이를 이용하여 무선 서비스 지연에 관한 품질 척도(QoS)를 충족시키는 적정 채널 용량의 산정 과정을 제시하였다. 본 연구 결과인 적정 채널 용량 산정 방법은 이동통신 데이터 서비스의 품질 만족도를 높이고 네트워크의 경제적 운용에 도움이 될 것으로 기대한다.