• Title/Summary/Keyword: Service Process Stage

Search Result 294, Processing Time 0.03 seconds

Stacked LTCC Band-Pass Filter for IEEE 802.11a (IEEE 802.11a용 적층형 LTCC 대역통과 여파기)

  • Lee Yun-Bok;Kim Ho-Yong;Lee Hong-Min
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.16 no.2 s.93
    • /
    • pp.154-160
    • /
    • 2005
  • Microwave Otters are essential device in modem wireless systems. A compact dimension BPF(Band-pass Filter) for IEEE 802.11a WLAN service is realized using LTCC multi-layer process. To extrude 2-stage band-pass equivalent circuit, band-pass and J-inverter transform applied to Chebyshev low-pass prototype filter. Because parallel L-C resonator is complicate and hard to control the inductor characteristics in high frequency, the shorted $\lambda/4$ stripline is selected for the resonator structure. The passive element is located in the different layers connected by conventional via structure and isolated by inner GND. The dimension of fabricated stacked band-pass filter which is composed of six layers, is $2.51\times2.27\times1.02\;mm^3$. The measured filter characteristics show the insertion loss of -2.25 dB, half-power bandwidth of 220 MHz, attenuation at 5.7 GHz of -32.25 dB and group delay of 0.9 ns at 5.25 GHz.

Design and Implementation of IoT-Based Intelligent Platform for Water Level Monitoring (IoT 기반 지능형 수위 모니터링 플랫폼 설계 및 구현)

  • Park, Jihoon;Kang, Moon Seong;Song, Jung-Hun;Jun, Sang Min
    • Journal of Korean Society of Rural Planning
    • /
    • v.21 no.4
    • /
    • pp.177-186
    • /
    • 2015
  • The main objective of this study was to assess the applicability of IoT (Internet of Things)-based flood management under climate change by developing intelligent water level monitoring platform based on IoT. In this study, Arduino Uno was selected as the development board, which is an open-source electronic platform. Arduino Uno was designed to connect the ultrasonic sensor, temperature sensor, and data logger shield for implementing IoT. Arduino IDE (Integrated Development Environment) was selected as the Arduino software and used to develop the intelligent algorithm to measure and calibrate the real-time water level automatically. The intelligent water level monitoring platform consists of water level measurement, temperature calibration, data calibration, stage-discharge relationship, and data logger algorithms. Water level measurement and temperature calibration algorithm corrected the bias inherent in the ultrasonic sensor. Data calibration algorithm analyzed and corrected the outliers during the measurement process. The verification of the intelligent water level measurement algorithm was performed by comparing water levels using the tape and ultrasonic sensor, which was generated by measuring water levels at regular intervals up to the maximum level. The statistics of the slope of the regression line and $R^2$ were 1.00 and 0.99, respectively which were considered acceptable. The error was 0.0575 cm. The verification of data calibration algorithm was performed by analyzing water levels containing all error codes in a time series graph. The intelligent platform developed in this study may contribute to the public IoT service, which is applicable to intelligent flood management under climate change.

A Study on the Interpretation of FTA Rules under WTO Agreement (WTO 협정하에서 FTA 체결의 정합성에 관한 연구)

  • Park Jong-Sam
    • Journal of Arbitration Studies
    • /
    • v.15 no.3
    • /
    • pp.233-266
    • /
    • 2005
  • The world trading system has been under many changes in recent years. One notably important development is that much attention away from the multilateralism-oriented World Trade Organization towards FTA(Free Trade Agreement). The Free Trade Agreement signed between korea and chile formally have been come effective for free trade in goods and services as from April 1, 2004. During Free Trade Agreement negotiations between both countries. This study aims at presenting the suggestion for the Korea to make the WTO rules and FTA by analyzing The interpretation of FTA under WTO System. It was founded by the investigation of WTO rules, most of the provisions are similar with other FTA, but a little provisions different from other FTA's. It is an appearance from the contracting party's peculiar circumstances such as state of industrial development or future prospect, conditions around international trade. The whole world has entered the new stage of bilateral and multilateral FTA. The essential or new generation or bilateral and multilateral FTA is creating more trade opportunities, promoting all factors, commodity, service, capital, technology and talent freely flow through canceling the trade barriers between FTA, in order to develop together within the regions. It shows that the cooperations transfer form the whole region into FTA. FTA makes not only the free trade smooth ,but also takes place the trade distortion effect. especially as the agriculture has a speciality each country, should it is ignored in negotiation, many reactions will be occurred in the process of fta Therefore Korea needs to deliver the message that Korea's hub is an essential ingredient for an efficient FTA and WTO system in a bilateral and multilateral win-win framework. Consequently Korea should have criterions about the rules of FTA and WTO system for peculiar circumstances of Korean economy and international trade.

  • PDF

ROLE OF COMPUTER SIMULATION MODELING IN PESTICIDE ENVIRONMENTAL RISK ASSESSMENT

  • Wauchope, R.Don;Linders, Jan B.H.J.
    • Proceedings of the Korea Society of Environmental Toocicology Conference
    • /
    • 2003.10a
    • /
    • pp.91-93
    • /
    • 2003
  • It has been estimated that the equivalent of approximately $US 50 billion has been spent on research on the behavior and fate of pesticides in the environment since Rachel Carson published “Silent Spring” in 1962. Much of the resulting knowledge has been summarized explicitly in computer algorithms in a variety of empirical, deterministic, and probabilistic simulation models. These models describe and predict the transport, degradation and resultant concentrations of pesticides in various compartments of the environment during and after application. In many cases the known errors of model predictions are large. For this reason they are typically designed to be “conservative”, i.e., err on the side of over-prediction of concentrations in order to err on the side of safety. These predictions are then compared with toxicity data, from tests of the pesticide on a series of standard representative biota, including terrestrial and aquatic indicator species and higher animals (e.g., wildlife and humans). The models' predictions are good enough in some cases to provide screening of those compounds which are very unlikely to do harm, and to indicate those compounds which must be investigated further. If further investigation is indicated a more detailed (and therefore more complicated) model may be employed to give a better estimate, or field experiments may be required. A model may be used to explore “what if” questions leading to possible alternative pesticide usage patterns which give lower potential environmental concentrations and allowable exposures. We are currently at a maturing stage in this research where the knowledge base of pesticide behavior in the environmental is growing more slowly than in the past. However, innovative uses are being made of the explosion in available computer technology to use models to take ever more advantage of the knowledge we have. In this presentation, current developments in the state of the art as practiced in North America and Europe will be presented. Specifically, we will look at the efforts of the ‘Focus’ consortium in the European Union, and the ‘EMWG’ consortium in North America. These groups have been innovative in developing a process and mechanisms for discussion amongst academic, agriculture, industry and regulatory scientists, for consensus adoption of research advances into risk management methodology.

  • PDF

Allergenicity Changes in Raw Shrimp (Acetes japonicus) and Saeujeot (Salted and Fermented Shrimp) in Cabbage Kimchi due to Fermentation Conditions

  • Park, Jin-Gyu;Saeki, Hiroki;Nakamura, Atsushi;Kim, Koth-Bong-Woo-Ri;Lee, Ju-Woon;Byun, Myung-Woo;Kim, Seong-Mi;Lim, Sung-Mee;Ahn, Dong-Hyun
    • Food Science and Biotechnology
    • /
    • v.16 no.6
    • /
    • pp.1011-1017
    • /
    • 2007
  • Saeujeot (salted and fermented shrimp) and kimchi are traditional Korean fermented foods. Even though shrimp have often induced severe allergic reactions in sensitized individuals, few studies have investigated the allergenicity of shrimp. The aim of this study was to observe the changes of pH and allergenicity of raw shrimp (Acetes japonicus) and saeujeot in cabbage kimchi during fermentation using competitive indirect enzyme-linked immunosorbent assay (Ci-ELISA). Fermentation was carried out at different temperatures (25, 15, and $5^{\circ}C$). The pH of cabbage kimchi added with raw shrimp or saeujeot slowly decreased at lower temperature ($5^{\circ}C$) at the end stage of the fermentation process. The binding ability of serum obtained from patients allergic to raw shrimp against shrimp tropomyosin and saeujeot in kimchi rapidly decreased during longer fermentation periods and higher temperature ($25^{\circ}C$). In conclusion, the allergenicity of both raw shrimp and saeujeot in kimchi decreased during fermentation but the decrease in allergenicity of saeujeot was greater than observed for raw shrimp.

Identifying and Analyzing Pre-Dispute Factors for Construction Projects (건설공사 사전분쟁요인 도출 및 분석)

  • Park, Sung-Yong;Yang, Jin-Kook;Kim, Byeong-Ok;Lee, Sang-Beom
    • Korean Journal of Construction Engineering and Management
    • /
    • v.10 no.6
    • /
    • pp.48-57
    • /
    • 2009
  • As recent construction projects have gradually become larger in size and complex, construction documents such as drawings and specifications revealed the limitations that can not express all the necessary information. Due to the lack of stipulations on the contract, disputes arise among contracting parties. Traditionally, many construction companies in Korea make an unfair agreement with the clients so that the irrational items are included in their contract documents. Potential dispute factors are triggered as a result of misleading or omitted items on the written documents. This paper analyzed the civic counseling cases obtained from the public procurement service in Korea, and identified the potential dispute factors that can occur during pre-dispute stage alone with their influence analysis. The results found from this study can be used for the development of checklists that prevent the dispute in the process of construction projects.

Exploring Possibilities of Intermediary Living Lab as a Platform (중간지원조직의 리빙랩 현황과 플랫폼으로서의 발전 가능성 탐색)

  • Seong, Jieun;Han, Kyu-young
    • Journal of Korea Technology Innovation Society
    • /
    • v.20 no.4
    • /
    • pp.915-938
    • /
    • 2017
  • This study examines the case of living lab led by intermediary and explores the development possibility as living lab platform. The analyzed cases are 'The Seoul Innovation Park Living lab', 'Korea Senior Living lab' of Seongnam Senior Experience complex, and 'Disaster Safety Living lab'. As a result of the analysis, all three cases have formed a user panel to form a living lab platform, and provide living lab service to internal and external organizations. A common feature that combines a technology platform with a 4Ps-based governance platform is identified. However, the characteristics, the meaning, and the process are different from case to case. In the future, the living lab platform needs to share learning experiences that are going on individually, since domestic living lab platform is in the early stage. Through this, it is necessary to seek collaboration and cooperation with related similar projects, and to jointly promote institutional and physical infrastructures related to living labs.

Implementation of UHD Broadcasting Receiver Based on ATSC 3.0 Standards (ATSC 3.0 기반 UHD 방송 수신기의 구현)

  • Kim, Yong Suk;Seo, Jae Hyun;Lee, Bong Ho;Kim, Heung Mook
    • Journal of Broadcast Engineering
    • /
    • v.23 no.6
    • /
    • pp.790-799
    • /
    • 2018
  • UHD broadcasting based on ATSC 3.0 is being implemented in Korea, and discussion on mobile broadcasting based on ATSC 3.0 is underway. The ATSC 3.0 standard introduces internet protocol based standards in order to facilitate the implementation of conventional broadcasting services as well as broadcasting and communication convergence services interlocking with communication services. In this process, various requirements for the receiver have been derived, and factors to consider for developing the receiver product have also increased. ATSC 3.0 broadcasting is currently in the introduction stage of the service, and additional technology development and product implementation related to the receiver should proceed until the full-scale market is formed. In this regard, this paper describes the considerations for developing UHD receiver based on ATSC 3.0 and the test procedure for verifying developed receiver.

On the Integrated Operation Concept and Development Requirements of Robotics Loading System for Increasing Logistics Efficiency of Sub-Terminal

  • Lee, Sang Min;Kim, Joo Uk;Kim, Young Min
    • International Journal of Internet, Broadcasting and Communication
    • /
    • v.14 no.1
    • /
    • pp.85-94
    • /
    • 2022
  • Recently, consumers who prefer contactless consumption are increasing due to pandemic trends such as Corona 19. This is the driving force for developing the last mile-based logistics ecosystem centered on the online e-commerce market. Lastmile led to the continued development of the logistics industry, but increased the amount of cargo in urban area, and caused social problems such as overcrowding of logistics. The courier service in the logistics base area utilizes the process of visiting the delivery site directly because the courier must precede the loading work of the cargo in the truck for the delivery of the ordered product. Currently, it's carried out as automated logistics equipment such as conveyor belt in unloading or classification stage, but the automation system isn't applied, so the work efficiency is decreasing and the intensity of the courier worker's labor is increased. In particular, small-scale courier workers belonging to the sub-terminal unload at night at underdeveloped facilities outside the city center. Therefore, the productivity of the work is lowered and the risk of safety accidents is exposed, so robot-based loading technology is needed. In this paper, we have derived the top-level concept and requirements of robot-based loading system to increase the flexibility of logistics processing and to ensure the safety of courier drivers. We defined algorithms and motion concepts to increase the cargo loading efficiency of logistics sub-terminals through the requirements of end effector technology, which is important among concepts. Finally, the control technique was proposed to determine and position the load for design input development of the automatic conveyor system.

The Foreign Asset Leverage Effect of Oil & Gas Companies after the Financial Crisis (금융위기 이후 정유산업의 외화자산 레버리지효과 분석)

  • Dong-Gyun Kim
    • Korea Trade Review
    • /
    • v.46 no.2
    • /
    • pp.19-38
    • /
    • 2021
  • This study aims to analyze the foreign asset leverage effect on Korean oil & gas companies' foreign profits and to maintain the appropriate foreign asset volume for reducing exchange risk. For a long time, large Korean companies, including oil companies, overheld foreign currency liabilities. For this reason, most large companies have been burdened to hedge exchange risk and this excess limit holding deteriorated total profit and reduced foreign currency asset management efficiency. Our paper proceeds in presenting a three-stage analysis considering diversified exchange risk factors through estimation on transformation of foreign transactions a/c including annual trends of foreign asset and industry specifics. We also supplement incomplete the estimation method through a practical hedging case investigation. Our research parts are differentiated on the analyzing four periods considering period-specifics The FER value of the oil firms ranged from -0.3 to +2.3 over the entire period. The results of the FER Value are volatile and irregular; those results do not represent the industry standard comparative index. The Korean oil firms are over the credit limit without accurate prediction and finance high interest rate funds from foreign-owned banks on the basis on a biased relationship. Since the IMF crisis, liabilities of global firms have decreased. Above all, oil firms need to finance a minimum limit without opportunity losses on the demand forecast and prepare for uncertainty in the market. To reduce exchange risk from the over-the-limit position, we must consider factors that affect the corporate exchange risk on the entire business process, including the contract phase.