• 한국도로학회논문집
• /
• 제17권3호
• /
• pp.69-76
• /
• 2015

PURPOSES : Performance evaluation of four types of asphalt concrete overlays for deteriorated national highways. METHODS : Pavement distress surveys for crack rate and rut depth have been conducted annually using an automated pavement survey vehicle since 2007. Linear and non-linear performance prediction models of the asphalt concrete overlays were developed for 43 sections. The service life of the asphalt overlays was defined as the number of years after which a crack rate of 30% or rut depth of 15mm is observed. RESULTS : The service life of the asphalt overlays was estimated as 17.4 years on an average. In 90.7% of the sections, the service life of the overlays was 15 years or more which is 1.5 times the life of conventional asphalt concrete overlays used in national highways. The performance of the overlays was dependent on the type of asphalt mixture, traffic volume levels, and environmental conditions. CONCLUSIONS : The usage of stone mastic asphalt (SMA) and polymer-modified asphalt (PMA) for the overlays provided good resistance to cracking and rutting development. It is recommended that appropriate asphalt concrete overlays must be applied depending on the type of existing pavement distress.

• 한국터널지하공간학회 논문집
• /
• 제20권1호
• /
• pp.73-81
• /
• 2018

본 논문은 지하구조물 계측센서의 내구연한 기준에 대한 규정 분석 연구로 국내 건설공사 발주기관의 건설 계측센서에 대한 내구연한 기준을 조사 분석하고, 법인세 시행규칙에서 건축물 등의 기준 내용연수 및 조달청의 건설계측 및 건설기계 관련 내용연수 기준을 분석하였다. 지하 구조물에 설치되기 전 조달청에서 물품 자체로 구매하는 경사계와 변형률계 등의 내구연한 기준은 8년에서 10년을 제시하고 있으나, 건설공사 시 원 지반 및 콘크리트 구조물 내에 설치된 계측센서는 지하수 영향 및 다짐 등 여러 가지 불리한 요인으로 물품 자체의 내용연수보다는 상당 기간 단축될 것으로 판단된다.

• 한국인공지능학회지
• /
• 제2권1호
• /
• pp.4-6
• /
• 2014

These days, aging, the aged and patients rapidly increased to produce problems, for instance, rapid increase of demand on medical service, higher medical expenses, low quality of the elderly's lives, shortage of physicians and nurses, and others [1]. These days, not only IT technology but also medical technology has taken the lead in settlement of the problems. Patients see a doctor to be given medical treatment and service when they are sick to have difficulty. The study investigated lifestyle monitoring system of chronic disease patients to indicate variation depending upon time. The health care is likely to solve problems of the elderly and chronic disease patients and to satisfy desire of better life quality by living healthy life and to diagnose diseases and give medical treatment and to give solutions in accordance with changes of paradigm of medical services.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권9호
• /
• pp.4089-4094
• /
• 2015

The purpose of the research was to determine the effect of home care service on the quality of life in patients with gynecological cancer. This randomized case control study was carried out in a womans hospital between September 2011 and February 2012. Women undergoing gynecological cancer treatment were separated into intervention and control groups, of 35 patients each. The intervention group was provided with nursing care service through hospital and home visits ($1^{st}$, $12^{th}$ weeks) within the framework of a specifically developed nursing care plan. The control group was monitored without any intervention through the hospital routine protocols ($1^{st}$, $12^{th}$ weeks). Data were collected using An Interview Form, Home Visit Monitoring Form and Quality of Life Scale/Cancer Survivors. Effects of home care service on the quality of life in gynecological cancer patients were investigated using chi-square tests, McNemar's test, independent t-test and ANOVA. This study found that the intervention group receiving home care service had a moderately high quality of life (average mean: $6.01{\pm}0.64$), while the control group had comparatively lower quality (average mean: $4.35{\pm}0.79$) within the 12 week post-discharge period (p<0.05). This study found home care services to be efficient in improving the quality of life in patients with gynecological cancer.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1999년도 춘계 학술발표회 논문집
• /
• pp.171-176
• /
• 1999

Nondestructive inspection and accompanying life analysis based on fracture mechanics were the major conventional methods for evaluating remaining life of critical high temperature components in power plants. By using these conventional methods, it has been difficult to perform in-service inspection for life prediction. Also, quantitative damage evaluation due to unexpected abrupt changes in operating temperature was almost impossible. Thus, many efforts have been made for evaluating remaining life during operation of the plants and predicting real-time life usage values based on the shape of structures, operating history, and material properties. In this study, a core software for on-line life monitoring system which carries out real-time life evaluation of a critical component in power boiler(high temperature steam headers) is developed. The software is capable of evaluating creep and fatigue life usage from the real-time stress data calculated by using temperature/stress transfer Green functions derived for the specific headers and by counting transient cycles. The major benefits of the developed software lie in determining future operating schedule, inspection interval, and replacement plan by monitoring real-time life usage based on prior operating history.

• Journal of Biosystems Engineering
• /
• 제41권4호
• /
• pp.396-407
• /
• 2016

Background: Although hyperspectral imaging was originally introduced for military, remote sensing, and astrophysics applications, the use of analytical hyperspectral imaging techniques has been expanded to include monitoring of agricultural crops and commodities due to the broad range and highly specific and sensitive spectral information that can be acquired. Combining hyperspectral imaging with remote sensing expands the range of targets that can be analyzed. Results: Hyperspectral imaging technology can rapidly provide data suitable for monitoring a wide range of plant conditions such as plant stress, nitrogen status, infections, maturity index, and weed discrimination very rapidly, and its use in remote sensing allows for fast spatial coverage. Conclusions: This paper reviews current research on and potential applications of hyperspectral imaging and remote sensing for outdoor field monitoring of agricultural crops. The instrumentation and the fundamental concepts and approaches of hyperspectral imaging and remote sensing for agriculture are presented, along with more recent developments in agricultural monitoring applications. Also discussed are the challenges and limitations of outdoor applications of hyperspectral imaging technology such as illumination conditions and variations due to leaf and plant orientation.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.15-20
• /
• 2006

Real time health monitoring system was studied to detect the . generation of defects in the composite structures during service life. The PZT sensors were embedded into the woven-glass/phenol composite plate during the fabrication. VARTM (Vacuum Assisted Resin Transfer Molding) process were used to fabricate the composite plate. A Teflon tape was embedded between glass fiber layers to mimic delamination induced during service. Normalized maximum amplitude and energy analyses were used for the acquired signals. Both amplitude and energy of acquired signals were extremely sensitive to the delamination. Therefore, it was successful to detect and to locate the defects in composite plate by monitoring signals from sensors and using the proposed method.

• Earthquakes and Structures
• /
• 제25권1호
• /
• pp.69-78
• /
• 2023

Life-cycle performance analysis of a reinforced concrete box section bridge was generated. Moreover, Monte Carlo simulation with important sampling (IS) was used to simulate the bridge material and load uncertainties. The bridge deterioration model was generated with the basic probabilistic principles and updated according to the measurement data. A genetic algorithm (GA) with the response surface model (RSM) was used to determine the deterioration rate. The importance of health monitoring systems to sustain the bridge to give services economically and reliably and the advantages of fiber-optic sensors for SHM applications were discussed in detail. This study showed that the most effective loss of strength in reinforced concrete box section bridges is corrosion of the reinforcements. Due to reinforcement corrosion, the use of the bridge, which was examined, could not meet the desired strength performance in 25 years, and the need for reinforcement. In addition, it has been determined that long-term health monitoring systems are an essential approach for bridges to provide safe and economical service. Moreover the use of fiber optic sensors has many advantages because of the ability of the sensors to be resistant to environmental conditions and to make sensitive measurements.

• Safety and Health at Work
• /
• 제13권1호
• /
• pp.112-116
• /
• 2022

Background/Aims: The Gachon Regional Occupational Cohort Study (GROCS) is a large-scale longitudinal study of occupational safety and health data (covering Work Environment Monitoring, Workers' Health Surveillance, and Occupational Health Service) conducted by the Gachon University Gil Medical Center (GUGMC) in Incheon, Republic of Korea. We conducted GROCS to identify the health effects of workers' occupational risks, behavior, socioeconomic status, and life style. Methods: The GROCS includes data from Work Environment Monitoring, Workers' Health Surveillance, and Occupational Health Service. The baseline year for all data collection was 2018. Work Environment Monitoring was conducted in 240 companies located in Incheon. General Health Examination and Special Health Examination were performed on 32,725 and 9,504 workers, respectively. Occupational Health Services were provided to 16,883 workers in 171 companies. These data have been collected and operated at an external data management institution and were provided as a retrospective cohort after removing personal identification information. Results: In 2018, the total number of companies was 2,854, among which which 488 special Health Examination, 171 Work Environment Monitoring, and 240 Occupational Health Service. The proportion of companies undergoing Special Health Examination was 17.1%, the proportion of companies undergoing Work Environment Monitoring was 8.4%, and the proportion of Companies undergoing Occupational Health Service was 6.0%. Conclusion: GROCS expects researchers to utilize its useful and reliable resource for occupational health and surveillance with for academic or political purposes to lead to improved workers' health and working environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.91.4-91
• /
• 2002

Today, Internal offers WWW(World Wide Web), remote control, file transfer and e-mail service. Among the services, WWW takes large portion because of convenient GUI, easy information search and unlimited information registration. WWW service gives the comfort in life such as goods purchase, information search, real-time news, internet TV and medical diagnosis. Remote Monitoring Server(RMS) Ssystem that uses internet and WWW is constructed for chip mounter. Hardware base consists of RMS, chip mounter and C/S(Customer Service) service. Software includes DBMS and various modules in server home page. Web browser provide product num her, bad product number, troubl...