• Journal of Electrical Engineering and Technology
• /
• v.8 no.4
• /
• pp.760-765
• /
• 2013

An Interline Power Flow Controller (IPFC) is a converter based controller which compensates and balance the power flow among multi-lines within the same corridor of the multi-line subsystem. The Interline Power Flow Controller consists of a voltage source converter based Flexible AC Transmission System (FACTS) controller for series compensation. The reactive voltage injected by individual Voltage Source Converter (VSC) can be controlled to regulate active power flow in the respective line in which one VSC regulates the DC voltage, the other one controls the reactive power flows in the lines by injecting series active voltage. In this paper, a circuit model for IPFC is developed and simulation of interline power flow controller is done using the proposed circuit model. Simulation is done using MATLAB Simulink and PSPICE. The results obtained by MATLAB are compared with the results obtained by PSPICE and compared with theoretical values.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.2
• /
• pp.141-149
• /
• 2021

In the field of electric vehicles and AGVs, wireless power transfer (WPT) charging systems have been developed recently because of its convenience, reliability, and positive environmental impact due to cable and cord elimination. In this study, we propose a WPT charging system using a single stage AC-DC converter that can be reduced in size and weight and thus can ensure convenience. The proposed single-stage AC-DC converter can control a wide output voltage (36-54 VDC) within coupling ranges by using the variable link voltage applied to the WPT resonant circuit through phase-shifted modulation at a fixed switching frequency. Moreover, the input power factor and total harmonic distortion can be improved by using the proposed converter. A 1 kW prototype that can operate with an air gap range of 40-50 mm is fabricated and validated through experimental results and analysis.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.6
• /
• pp.515-525
• /
• 2022

The wireless power transfer (WPT) charging system for AGV depends highly on the coupling conditions due to air gap variation. To attain stable output power with high transfer efficiency under various coupling conditions, a single-stage, DC-DC converter that operates with robustness to changes in air gaps is proposed for the WPT system. The proposed converter is capable of soft switching under the set input voltage (V_in: 380 V_DC), load conditions (0-1 kW), and air gap changes (30-70 mm). In addition, a wide output voltage range (Vo: 39-54 V_DC) can be controlled by varying the link voltage due to the phase control at a fixed switching frequency. Experimental results are verified using a prototype of a 1 kW wireless power charging system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.6
• /
• pp.472-480
• /
• 2009

This paper describes the overmodulative SVPWM technique and harmonics analyses of three phase NPC type three-level inverter to the modulation index. Three phase NPC type three-level inverter adopted SVPWM to extend the linear region to 0.907, moreover, the following voltage compensation using Fourier series was adopted in the region of overmodulation to make it work to six-step level. PD type of multi carrier method is used with the double Fourier series for the analysis of output power harmonics characteristic. Simulation was performed by PSIM, and the harmonics characteristics of 3-level inverter in each region are analyzed. The side band harmonics of carrier frequency are dominant in the linear region, but these harmonic components are decreased as the inveter goes to overmodulation region, and the harmonics due to the fundamental frequency is increased gradually at the same time. The harmonic analyses are verified through the simulation and experimental results under the same condition.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.1
• /
• pp.71-76
• /
• 2022

Since brightness is proportional to the operating current, a method of connecting several LEDs in series and driving with a constant current source is widely used for driving circuits of LED lights. Because several LEDs are connected in series, if some LEDs open due to a fault, the current path is broken and all other LEDs connected in series are turned off. In this paper, we designed a circuit to solve this problem by connecting a Zener diode having a breakdown voltage of about 0.4V higher than the LED operating voltage in parallel with each LED to create a current bypass in case of LED failure. Through simulations and experiments, it was confirmed that the current of the Zener diode hardly flows when the LED is operating normally, and that the Zener diode stably operates as a current bypass when the LED fails.

• Journal of Preventive Medicine and Public Health
• /
• v.27 no.3 s.47
• /
• pp.627-651
• /
• 1994

In this study, literature review was done to examine and compare the current status and problems of different evaluation approaches toward permanent impairment in Korea. Alternatives and improvements in the current approaches in Korea were suggested. Series of cases were also examined to compare different approaches applied to the real cases, using 105 cases from a hospital data and another 207 cases from a insurance company data. The main findings of the literature review are as follows; 1. The current evaluation methods of permanent impairment in Korea are grouped into two categories, grading and rating. Gradings of impairments are expressly specified in 17 various statutes. 2. In Grading methods, the rigid system of 74 different grades has been adopted uniformally for the convenience of administration, which may not be, appropriate or valid from medical and scientifical aspect. 3. The adventage of McBride method is assessment of occupational disability rate. However the classified compensable occupations are only 280 and limited to manufacturing industries in 1960s'of U.S.A., which is not appropriate to current Korean circumstances. Especially, the job list does not include managerial officers or mental workers. 4. AMA Guides is the scientific and reasonable method for the assessment of physical impairment rate. However compensation and reparation of impairment case is difficult because this method cannot assess the disability rate according to occupation, age, etc. The results of cases comparative study are as follows: 5. The physical Impairment could be compared in 167 out of total 312 cases, and for the cases of complex impairment, McBride method underestimate physical impairment rate compared with AM A method. 6. When disability late was assessed, occupation was considered the compensation of only 85 cases, and age was used in only 21 cases. This was because occupation and age compensation in McBride method are unreasonable. 7. The most Ideal alternative is to assess physical impairment according to AMA method and then to develop a compensation method appropriate for the circumstances of Korea society.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1078-1080
• /
• 2002

High electronic equipments for dem-and improvement and efficiency are requested power quality of superior quality, the compensation system of power quality is processing actively, when voltage sag occurs, we propose to a series voltage compensator and control algorithm using of pid control in unbalanced 3-phase power system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.401-406
• /
• 2004

In this paper, a new time-domain adaptive predistortion scheme is proposed to compensate for the nonlinearity of high power amplifiers (HPA) in OFDM systems. A complex Wiener-Hammerstein model (WHM) is adopted to describe the input-output relationship of unknown HPA with linear dynamics, and a power series model with memory (PSMWM) is used to approximate the HPA expressed by WHM. By using the PSMWM, the compensation input to HPA is calculated in a real-time manner so that the linearization from the predistorter input to the HPA output can be attained even if the nonlinear input-output relation of HPA is uncertain and changeable. In numerical example, the effectiveness of the proposed method is confirmed and compared with the identification method based on PSMWM.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.7
• /
• pp.16-25
• /
• 1994

The major reason that reduces the performance of satellite communication channels is known as the nonlinearities of high power amplifiers(HPA's) which are usually modeled by memoryless nonlinear systems, in the channels. This paper proposes a nonlinear adaptive predistorter,which predistorts the input symbols such that the symbol passing through the nonlinear HPA preserves the desired constellation, and derives the region of convergence for the predistorter. The predistorter has capability of coping adaptively with any time-varying environment such as changes of operating points if HPA since the coefficients of the predistorter which has a form of truncated Tayler series are obtained by recursive optimization procedure utilizing QAM data sequence directely. Simulation results show that the proposed one with 16 QAM input has better performance than the conventional fixed predistorter with the same input.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.233-235
• /
• 2001

Residual stress in the forged parts affects the resistance to mechanical failure, dimensional uniformity, and the service life of the parts. In order to elucidate the development of residual stress in open-die forging process, elasto-plastic finite element analysis was implemented to radial forging process. Super duplex stainless steel SAF 2507 was selected as workpiece material and a series of mechanical tests followed by numerical compensation to deformation heating was conducted to obtain necessary flow data. The residual stress distributions were calculated using commercial 3-D FEM code and the effects of process design were evaluated from selected results.