• 한국군사과학기술학회지
• /
• 제17권2호
• /
• pp.159-166
• /
• 2014

The study is conducted on the subject of optimization of components sizing for series hybrid electric propulsion systems. The components sizing of series type hybrid system is very important because each component of series type is larger than the corresponding component of the parallel type or series-parallel type. If the components sizing is greater or less than what is required to this system, the performance of the system is getting worse. The methodology for the sizing of a driving motor is introduced based on the foundation of determined system configuration and performance target. And the sizing of an engine/generator and a battery is achieved based on simulation results using Dynamic Programming. It is possible to find the optimal sizing of these components by comparing fuel efficiency of hybrid electric propulsion system for 8 driving cycles.

• 한국군사과학기술학회지
• /
• 제15권4호
• /
• pp.366-373
• /
• 2012

In this paper, serious changes in the electromagnetic environment with increasing power and energy capabilities for electric driving and military mission are discussed. Design and control strategies on the Electro-Magnetic Compatibility(EMC) for the series hybrid electric vehicle are proposed to minimize the effects of electromagnetic interferences.

• 한국군사과학기술학회지
• /
• 제16권2호
• /
• pp.225-232
• /
• 2013

In this paper, the study was conducted on the subject of the hybrid electric vehicles used by the military, and optimized the propulsion system for fuel economy considering energy supply to the mission equipments. For the analysis of the vehicles, a method based on the geometry and some assumptions was applied with basic vehicle dynamics. The sources of energy supply in the military hybrid electric vehicles are an engine, a battery and an ultra-capacitor. The optimal operation point among an engine, a battery and an ultra-capacitor can be found by minimizing energy consumption of driving power train and mission equipments. In the study, it was possible to find the optimal propulsion system by comparing fuel efficiency of the vehicles during the driving cycle.

• 한국항공우주학회지
• /
• 제43권12호
• /
• pp.1097-1107
• /
• 2015

일반적인 수직이착륙 항공기는 높은 출력대 중량비의 가스터빈엔진을 사용한다. 그러나 높은 연료 소모율로 인해 소형 항공기에는 적합하지 않다. 본 연구에서는 직렬 하이브리드-전기 추진시스템을 대안으로 제안하였으며, 시스템을 구성할 소형엔진과 전기모터, 배터리에 대한 기술조사 비교분석을 수행하였다. 연구를 위한 고정익 수직이착륙 무인항공기로 I사(社)의 65 kg급 수직이착륙 P-무인기를 사용하였다. 개발한 발전제어 및 전력제어 알고리즘의 타당성과 항속시간을 예측하기 위해 Matlab/simulink$^{(R)}$를 이용한 시뮬레이션을 수행하였다. 그 결과 알고리즘이 비교적 잘 작동하는 것을 확인하였고, 직렬 하이브리드-전기 시스템이 임무형상을 만족하는 7시간의 항속시간을 충분히 만족 할 수 있을 것으로 예측하였다.

• Journal of Electrical Engineering and Technology
• /
• 제3권2호
• /
• pp.224-234
• /
• 2008

Multi-phase machines can be used in variable speed drives. Their applications include electric ship propulsion, 'more-electric aircraft' and traction applications, electric vehicles, and hybrid electric vehicles. Multi-phase machines enable independent control of a few numbers of machines that are connected in series in a particular manner with their supply being fed from a single voltage source inverter(VSI). The idea was first implemented for a five-phase series-connected two-motor drive system, but is now applicable to any number of phases more than or equal to five-phase. The number of series-connected machines is a function of the phase number of VSI. Theoretical and simulation studies have already been reported for number of multi-phase multi-motor drive configurations of series-connection type. Variable speed induction motor drives without mechanical speed sensors at the motor shaft have the attractions of low cost and high reliability. To replace the sensor, information concerning the rotor speed is extracted from measured stator currents and voltages at motor terminals. Open-loop estimators or closed-loop observers are used for this purpose. They differ with respect to accuracy, robustness, and sensitivity against model parameter variations. This paper analyses operation of an MRAS estimator based sensorless control of a vector controlled series-connected two-motor five-phase drive system with current control in the stationary reference frame. Results, obtained with fixed-voltage, fixed-frequency supply, and hysteresis current control are presented for various operating conditions on the basis of simulation results. The purpose of this paper is to report the first ever simulation results on a sensorless control of a five-phase two-motor series-connected drive system. The operating principle is given followed by a description of the sensorless technique.

• 한국항공우주학회지
• /
• 제44권9호
• /
• pp.833-841
• /
• 2016

본 연구에서 대상으로 삼은 순항 200 W급 전기동력무인기는 태양전지, 연료전지, 배터리를 동시에 주 전력원으로 사용한다. 각 전력원별 출력은 능동전력제어 방식에 의해 연료전지의 최대 출력을 제한한 상태에서 배터리의 적정용량을 유지하도록 각 전력원별 전력제어를 수행하게 된다. 능동전력제어 방식에 의한 각 전력원별 출력변동은 지상통합시험을 통해 확인하였다. 또한 연료전지의 최대출력제한이 전체 시스템의 출력변동에 미치는 영향을 실험적으로 확인하였으며, 연료전지의 최대출력값은 연료전지 시스템용 6직렬 소형 배터리의 과방전을 방지하기 위해서는 150W가 적절함을 확인하였다.

• 전력전자학회논문지
• /
• 제23권6호
• /
• pp.408-414
• /
• 2018

Given that lithium-ion batteries are expected to be used as power sources for electric and hybrid vehicles, thermodynamics experimentation and prediction based on experimental data were performed. Thermal, electrochemical, and electrochemical/electrical-thermal models were used for accurate battery modeling. Various applications of different battery packs were demonstrated, and thermal analysis was performed using the same experimental conditions for square and rectangular battery packs. Accurate thermal analysis for a single cell should be prioritized to determine the thermal behavior of the battery pack. The energy balance equation, which contains heat generation and heat transfer factors, defines the thermal behavior of the battery pack. By comparing battery packs of different shapes tested under the same condition, this study revealed that the rectangular battery pack is superior to the square battery pack in terms of the maximum temperature of inner cells and temperature variation between cells.