• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.493-497
• /
• 1991

A problem of analysis and design of asymptotically reliable serial production systems, closed with respect to the number of carriers that transport parts between operations, is addressed. A case study of a paint shop operation at a modern automobile assembly plant is described. The results obtained indicate that optimization of the system with respect to the number of carriers available and the capacity of the feedback buffer leads to a substantial improvement in the production rate.

• 한국경영과학회지
• /
• 제11권2호
• /
• pp.88-100
• /
• 1986

The focus of this paper is to develop the optimization procedures and analyze the complexities of the nonserial diverging branch systems in Dynamic Programming. The optimization procedure of the system is developed such that it helps to reduce the computational demands of the system. The complexity of the network is analyzed with the increasing number of nodes, branches and their connectedness to the main serial system. Determination of the optimal set of nodes for the main serial chain is also investigated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1013_1014
• /
• 2009

In this paper, the electrical interfaces used in between COMS satellite bus and Ka-band communication payload are analyzed to verify the robustness of data bus. The purpose of the serial data bus of satellite is to allow serial data transfer between one bus controller or source equipment to several user terminals or slave equipments. A serial data bus in COMS satellite is mainly used for Channel Amplifier and Digital Control Unit of Ka-band Payload.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.195-197
• /
• 2006

In this paper, an interface unit is designed to efficiently monitor transmission data in Controller Area Network(CAN)-based control systems. The CAN uses a serial multi master communication protocol that efficiently supports distributed real-time control with a very high level of data integrity, and communication speeds of up to 1Mbps. The interface unit is composed of a DSP controller which collects data on the CAN bus and transfers data to a personal computer via serial communication to save and display of interesting signals. The experimental system consists of three DSP controllers which represent electronic control units of a vehicle, an interface unit for analysing the data on the bus, and a graphic monitoring program coded on the Windows platform. The validity and the effectiveness of the proposed simple type of CAN interface unit are shown through the experimental results.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2000년도 가을 학술발표논문집 Vol.27 No.2 (1)
• /
• pp.605-607
• /
• 2000

본 논문에서는 유한 필드 GF(2m)상에서 모듈러 곱셈 A(x)B(x) mod p(x)를 수행하는 2-디지트 시리얼 (2-digit-serial) 시스톨릭 어레이 구조인 곱셈기를 제안하였다. LSB-first 곱셈 알고리즘을 분석한 후 2-디지트 시리얼 형태의 자료의존 그래프(data dependency graph, 이하 DG)를 생성하여 시스톨릭 어레이를 설계하였다. 제안한 구조는 정규적이고 서로 반대 방향으로 진행하는 에지들이 없다. 그래서 VLSI 구현에 적합하다. 제안한 2-디지트 시리얼 곱셈기는 비트-패러럴(bit-parallel) 곱셈기 보다는 적은 하드웨어를 사용하며 비트-시리얼(bit-serial) 곱셈기 보다는 빠르다. 본 논문에서 제안한 2-디지트 시리얼 시스톨릭 곱셈기는 기존의 같은 종류의 곱셈기 보다 처리기의 최대 지연 시간이 적다. 그러므로 전체 시스톨릭 곱셈기의 처리시간을 향상시킬 수 있다.

• 한국통신학회논문지
• /
• 제31권4C호
• /
• pp.324-330
• /
• 2006

The next generation mobile communication systems require error correcting schemes that can be adaptable to various code rates and lengths with negligible performance degradation. Serial concatenated convolutional codes can be a good candidate satisfying these requirements. In this paper, we propose new rate-compatible punctured serial concatenated convolutional code (RCPSCCC) which performs better than the RCPSCCC proposed by Chandran and Valenti in the sense of the rate compatibility. These codes are evaluated and analyzed by using computer simulation and SNR evolution technique. As their application, Type-II hybrid automatic repeat request (HARQ) schemes using both RCPSCCCs are constructed and new RCPSCCC is shown to have better throughput.

• Knee surgery & related research
• /
• 제30권4호
• /
• pp.311-318
• /
• 2018

Purpose: The purpose of this study was to evaluate changes in the coronal alignment of the knee and ankle joints after open wedge high tibial osteotomy (OWHTO) to determine factors related to the recurrence (R) of the varus deformity by serial analysis. Materials and Methods: Sixty-four OWHTOs were enrolled in this study. The weight bearing line (WBL) ratio, joint line convergence angle (JLCA), knee joint inclination, mechanical axis-tibial plateau angle, talar inclination (TI), and distal tibia articular angle (DTAA) were serially assessed. Serial correlation analysis between all parameters was performed. Patients were divided into R group and no recurrence (NR) group according to the WBL ratio (55%) at postoperative one year. Results: The preoperative WBL ratio showed significantly negative correlation with serial changes of JLCA, TI, and DTAA (p<0.05). The JLCA, TI, and DTAA as well as WBL ratio showed a significantly larger degree of varus alignment in the R group than in NR group at postoperative 6 weeks and 1 year after OWHTO (p<0.05). Conclusions: Sufficient correction of the WBL and restoration of the JLCA during OWHTO are essential to prevention of the R of varus deformity after the surgery because they are the only modifiable factors during surgery. Level of Evidence: IV, Case series.

• 한국안전학회지
• /
• 제39권1호
• /
• pp.114-122
• /
• 2024

This study aimed to identify the multiple mediation effects of job satisfaction and job commitment on the relationships between job stress and workers' safety behavior in terms of compliance and participation, in which the multiple mediation effects are a hybrid of parallel and serial mediating relationships. The multiple mediation model was analyzed using the bootstrapping method through the PROCESS macro tool in SPSS. The results showed that job stress negatively affects job satisfaction, job commitment, and workers' safety behavior, and the relationship between job stress and safety behavior is mediated by both job satisfaction and job commitment. The serial mediation effects of job satisfaction and job commitment were also found to be statistically significant in the regression relationship between job stress and safety behavior. Further analysis of the compliance and participation subdimensions of safety behavior showed similar results. Specifically, the serial mediation effects of job satisfaction and job commitment on participation and compliance behavior were further supported; however, the mediation effect of job satisfaction was not significant, whereas that of job commitment did remain significant. Further research is needed to determine if the mediation effect of job satisfaction found in this study can be extended and generalized to workers in various fields and industries.

• 스마트미디어저널
• /
• 제12권2호
• /
• pp.91-102
• /
• 2023

전력거래소 에너지 관리 시스템(Energy Management System, EMS)는 발전소 및 변전소와 통신을 수행하며 전력공급의 안정성 및 연속성, 실시간성, 경제성을 위하여 송·변전시스템의 변전소 및 발전소 운전상태를 모니터링하고 발전소와 변전소를 제어한다. 현재 전력거래소 EMS는 발전소 및 변전소와 시리얼 통신기반 DNP(Distributed Network Protocol) 3.0 프로토콜을 기반으로 통신을 수행하고 있다. 하지만, 시리얼 통신장비 수급의 어려움, 신재생 발전설비를 포함한 통신을 수행할 신규 설비의 지속적인 증가로 인해 시리얼 포트 및 모뎀의 설치 공간 부족 등의 문제가 제기되고 있다. 이에 본 논문에서는 전력거래소 EMS의 기존 시리얼 통신방식 대신 TCP/IP기반의 통신 방식을 제시하며, 통신방식 변화에 따른 발생 가능한 보안 위험 분석 및 보안 위험에 대한 대응방안을 제시한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.575-581
• /
• 1993

This paper deals with analysis of articulated robot manipulator used for Arc welding and Material handling. Compared with present robot of which weight holding capacity is 6kg, this robot shows wider and symmetric working range for it's serial type mechanism. The link length is determined to have widest working range by using optimal simulation. To reduce body's weight, small AC servo motor is adopted and driving peak torque exerted at each joint is reduced by using dynamic analysis. So it is possible to reduce body's weight by 40% compared with the same class's robot and get wider working range. And by adopting modular design concept, each axis is designed to be changed easily for user's special need and repair.