• Geomechanics and Engineering
• /
• 제28권5호
• /
• pp.437-454
• /
• 2022

The hydro-mechanical (HM) two-way sequential coupling in the TOUGH2-FLAC3D linking algorithm is validated completely and successfully in both M to H and H to M directions, which are initiated by mechanical surface loading for geomechanical validation and hydrological groundwater pumping for hydrogeological validation, respectively. For such complete and successful validation, a TOUGH2-FLAC3D linked numerical model is developed first by adopting the TOUGH2-FLAC3D linking algorithm, which uses the two-way (fixed-stress split) sequential coupling scheme and the implicit backward time stepping method. Two geomechanical and two hydrogeological validation problems are then simulated using the linked numerical model together with basic validation strategies and prerequisites. The second geomechanical and second hydrogeological validation problems are also associated with the Mandel effect and the Noordbergum and Rhade effects, respectively, which are three phenomenally well-known but numerically challenging HM effects. Finally, sequentially coupled numerical solutions are compared with either analytical solutions (verification) or fully coupled numerical solutions (benchmarking). In all the four validation problems, they show almost perfect to extremely or very good agreement. In addition, the second geomechanical validation problem clearly displays the Mandel effect and suggests a proper or minimum geometrical ratio of the height to the width for the rectangular domain to maximize agreement between the numerical and analytical solutions. In the meantime, the second hydrogeological validation problem clearly displays the Noordbergum and Rhade effects and implies that the HM two-way sequential coupling scheme used in the linked numerical model is as rigorous as the HM two-way full coupling scheme used in a fully coupled numerical model.

• 소성∙가공
• /
• 제21권7호
• /
• pp.441-446
• /
• 2012

A sequential coupled field analysis of electromagnetic free bulging was performed by using FEM. A 2D axi-symmetric electromagnetic model based on the magnetic vector potential is proposed for the calculation of magnetic field and Lorentz's forces. The Newmark integration method is used to calculate the transient dynamic plastic deformation of sheet during free bulging. In the finite element model, the effect of sheet deformation on the electromagnetic field analysis is taken into consideration. In order to confirm the sequential electromagnetic-mechanical coupling analysis, an experiment with an electromagnetic forming apparatus was conducted. The results showed that the final bulge height of the sheet predicted from the proposed method is in good agreement with experimentally measured height.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 춘계학술대회
• /
• pp.200-201
• /
• 2017

이 논문은 3D 순차적 CMOS 인버터 회로의 전기적 상호작용을 고려한 시뮬레이션을 제시하고자 한다. 상층 NMOS는 BSIM-IMG, 하층 PMOS에는 LETI-UTSOI 모델을 사용하여 전기적 상호작용이 잘 반영되는지 TCAD 데이터와 SPICE 데이터를 비교하였다. 트랜지스터 간의 높이가 작을 때 하층 게이트의 전압의 변화에 따라 상층 전류-전압 특성에 전기적 상호작용이 잘 반영되는 것을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제32권1호
• /
• pp.359-362
• /
• 2011

• 한국자기학회지
• /
• 제6권5호
• /
• pp.281-286
• /
• 1996

전기 기계의 운동 특성을 정확히 해석하기 위해서는 해석모델의 전자장방정식과 운동방정식이 함께 고려되어야 한다. 본 논문에서는 자장내에서 두 개의 스프링에 의해 진동 운동을 하는 도체를 해석함에 있어 순차적인 결합방법을 채책하였다. 한 시점에서 속도가 주어지면 전자장해석 및 유도전류 계산은 유한요소법을 이용하였고, 그때마다 전자력을 게산하였다. 또한 전자장방정식이 풀린다음 4차 runge-kutta 미분방정식 해법을 이용하여 운동방정식과 결합하였다. 위의 과정을 순차적으로 계속 반복함으로써 시간에 대한 위치, 속도, 유도전류 및 전자력을 알아내어 운동체의 운동특성을 알아보았다. 계산된 결과는 에너지보존 법칙에 적용하여 제안한 순차적인 결합방법의 유용성을 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.244-245
• /
• 2013

This paper proposes a control algorithm for permanent magnet synchronous generator with a back-to-back three-level neutral-point clamped voltage source converter in a medium-voltage offshore wind power system under unbalanced grid conditions. The proposed control algorithm particularly compensates for the unbalanced grid voltage at the point of common coupling in a collector bus of offshore wind power system. This control algorithm has been formulated based on the symmetrical components in positive and negative rotating synchronous reference frames under generalized unbalanced operating conditions. Instantaneous active and reactive power are described in terms of symmetrical components of measured grid input voltages and currents. Negative sequential component of ac input current is injected to the point of common coupling in the proposed control strategy. The amplitude of negative sequential component is calculated to minimize the negative sequential component of grid voltage under the limitation of current capability in a voltage source converter. The proposed control algorithm makes it possible to provide a balanced voltage at the point of common coupling resulting in the generated power of high quality from offshore wind power system under unbalanced network conditions.

• 전자공학회논문지A
• /
• 제29A권8호
• /
• pp.99-109
• /
• 1992

First, the coupling faults of semiconductor memory are classified in detail. The chained coupling fault is introduced and defined, which results from sequential influencing of the coupling effects among memory cells, and its mapping relation is described. The linked coupling fault and its order are defined. Second, the deterministic “Algorithm GA” is proposed, which detects stuack-at faults, transition faults, address decoder faults, unlinked 2-coupling faults, and unlinked chained coupling faults. The time complexity and the fault coverage are improved in this algorithm. Third, it is proved that the march test of an address sequence can detect 97.796% of the linked 2-coupling faults with order 2. The deterministic “Algorithm NA” proposed can detect to the limit. The time complexity and the fault coverage are improved in this algorithm.

• 한국CDE학회논문집
• /
• 제16권3호
• /
• pp.236-245
• /
• 2011

Many researchers have recently studied multi-level formulation strategies to solve the MDO problems and they basically distributed the coupling compatibilities across all disciplines, while single-level formulations concentrate all the controls at the system-level. In addition, approximation techniques became remedies for computationally expensive analyses and simulations. This paper studies comparisons of the MDO methods with respect to computing performance considering both conventional sequential and modem distributed/parallel processing environments. The comparisons show Individual Disciplinary Feasible (IDF) formulation is the most efficient for sequential processing and IDF with approximation (IDFa) is the most efficient for parallel processing. Results incorporating to popular design examples show this finding. The author suggests design engineers should firstly choose IDF formulation to solve MDO problems because of its simplicity of implementation and not-bad performance. A single drawback of IDF is requiring more memory for local design variables and coupling variables. Adding cheap memories can save engineers valuable time and effort for complicated multi-level formulations and let them free out of no solution headache of Multi-Disciplinary Analysis (MDA) of the Multi-Disciplinary Feasible (MDF) formulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.142-144
• /
• 1996

For the accurate analysis of motional characteristics of electrical machines, it is needed to solve the motion equations together with the electromagnetic field equations. In this paper the sequential coupling of systems, the spring mass system and the electromagnetic system, is adopted. The induced current and the magnetic fields are calculated by FEM with given speed. And then, with the computed electromagnetic force, the mechanical equations are solved by the Runge-Kutta method. The above to processes are repeated sequentially to obtain the time domain solutions. The resultant values are applied to the energy conservation law to prove the usefulness of the proposed sequential method.

• Bulletin of the Korean Chemical Society
• /
• 제32권11호
• /
• pp.3973-3978
• /
• 2011

The reductive pinacol coupling reaction of aldehydes or ketones creating a new C-C bond has been a major tool to produce 1,2-diol compounds. The reaction mechanism is known to be composed of sequential three steps (activation, coupling, and dissociation). In this work, we studied the dissociation step of half-titanocene-based catalytic systems. Cp and $Cp^*$ derivatives of the pinacolato-bridged dinuclear complex were synthesized and evaluated as possible models for intermediates from the coupling step. We monitored $^1H$-NMR spectra of the reaction between the metalla-pinacol intermediates and $D_2O$. New reaction routes of the dissociation step including oxo- and pinacolato-dibridged dinuclear complexes and oxo-bridged multinuclear complexes have been suggested.