• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 제2회 단조심포지엄 단조기술의 진보
• /
• pp.1-25
• /
• 1995

This paper deals with the development of an intelligent CAD system for specifying the operation sequence in cold forging. Cold forging technology is facing with various new design requirements. Therefore, it is very important to develop a decision method for the operation sequence, with comparatively high adaptability to the new requirements. An intelligent CAD system which is the uncertain factors in human knowledge into consideration by applying fuzzy theory is established. Various actual design data about were organized, and these organized data were applied to the system as the case base. The system automatically generates the design data of operation sequence such as the forming method and the geometric data of products in each operation stage by the reasoning method applied the fuzzy pattern matching. By comparing the design results in the above system with the actual design data of a human expert, this paper presents that our method is useful for practical application.

• 소성∙가공
• /
• 제6권4호
• /
• pp.291-299
• /
• 1997

This paper is concerned with the design of process sequence to form the inner skin of landing gear. The inner skin of landing gear is a part of airplane which is known to be difficult to form its shape. Our study investigates the production method of inner skin and examines the design criteria by three dimensional elastic-plastic finite element method. Based on the results of simulation, design strategy for improving the process sequence is developed using stretch forming process. The final product of inner skin is produced in multi-stage operations with annealing treatment to meet the required capacity of press. The numerical results show that the newly designed process can produce the required part successfully within the design criteria.

• 대한전기학회논문지
• /
• 제40권8호
• /
• pp.836-844
• /
• 1991

PLC(programmable logic controller) system is widely used for the control of factory. PLC system receives ladder diagram which is drawn by the user to implement hardware logic, converts the ladder diagram into sequence program which is executable in the PLC system, and executes the sequence program indefinitely unless user breaks. The sequence program processes the data of on/off signal, and endures 1 scan delay and missing of pulse-type signal shorter than a scan time. So, data dependency doesn't exist. By applying theis characteristics to multiprocessor architecture, we design parellel PLC functionally and evaluate performance upgrade. Parallel PLC consists of central processing module, N general processing unit, and a shared memory by master-slave type. Each module executes allocated sequence program by the control of central processing module. We can expect performance upgrade by parallel processing, and reliability by relocation of sequence program when error occurs in processing module.

• 한국통신학회논문지
• /
• 제33권5A호
• /
• pp.479-486
• /
• 2008

본 논문은 MIMO-OFDM 시스템을 기반으로 한 Gbps급 차세대 무선전송 시스템에서 m-sequence를 이용하여 효율적으로 훈련심볼을 설계하는 방법을 제안한다. 계산량을 고려하지 않는 일반적인 훈련심볼 설계방법에는 랜덤한 시퀀스에 대하여 시스템 요구사항을 하나하나 비교해가며 모든 사항이 만족되었을 때 훈련심볼로 채택하는 기법이 존재한다. 본 논문에서는 상관관계 특성이 우수하여 대역확산 통신 방식 등에서 사용하는 m-sequence를 기반으로 제한된 탐색공간 내에서 효율적인 MIMO-OFDM 시스템을 위한 훈련심볼의 단계별 설계 및 검증방법을 논의한다. 제안된 방법은 패킷 기반 MIMO-OFDM 무선통신 시스템에서 자동이득제어, 타이밍 동기, 주파수 및 시간옵셋 추정, MIMO 채널추정 등을 포함한 시스템에서 요구하는 조건을 만족시키는 훈련심볼 설계를 목표로 한다.

• Structural Engineering and Mechanics
• /
• 제25권2호
• /
• pp.239-268
• /
• 2007

This paper deals with optimal stacking sequence design of laminate composite structures. The stacking sequence optimisation of laminate composites is formulated as a combinatorial problem and is solved using Simulated Annealing (SA), an algorithm devised based on inspiration of physical process of annealing of solids. The combinatorial constraints are handled using a correction strategy. The SA algorithm is strengthened by embedding Tabu search in order to prevent recycling of recently visited solutions and the resulting algorithm is referred to as tabu embedded simulated Annealing (TSA) algorithm. Computational performance of the proposed TSA algorithm is enhanced through cache-fetch implementation. Numerical experiments have been conducted by considering rectangular composite panels and composite cylindrical shell with different ply numbers and orientations. Numerical studies indicate that the TSA algorithm is quite effective in providing practical designs for lay-up sequence optimisation of laminate composites. The effect of various neighbourhood search algorithms on the convergence characteristics of TSA algorithm is investigated. The sensitiveness of the proposed optimisation algorithm for various parameter settings in simulated annealing is explored through parametric studies. Later, the TSA algorithm is employed for multi-criteria optimisation of hybrid composite cylinders for simultaneously optimising cost as well as weight with constraint on buckling load. The two objectives are initially considered individually and later collectively to solve as a multi-criteria optimisation problem. Finally, the computational efficiency of the TSA based stacking sequence optimisation algorithm has been compared with the genetic algorithm and found to be superior in performance.

• 한국통신학회논문지
• /
• 제34권11C호
• /
• pp.1113-1121
• /
• 2009

본 논문에서는 기지국간 간섭이 큰 다중기지국 환경에서 multiple-input multiple output (MIMO) orthogonal frequency division multiplexing (OFDM) 시스템을 위한 파일럿 시퀀스 설계 방법 및 채널 추정 기법을 제안한다. 제안 파일럿 시퀀스의 경우 평균 제곱 오류치 (Mean Square Error)를 최소화시키며, 설계된 파일럿에 적합한 채널 추정 방법을 제안한다. 제안된 파일럿 시퀀스 및 채널 추정 기법은 추 시퀀스의 상관관계 특성을 이용해 설계되며 모의실험을 통해 설계된 파일럿 시퀀스를 이용한 채널 추정 기법이 기지국간 간섭을 완화에 효과적임을 보여준다.

• Communications for Statistical Applications and Methods
• /
• 제6권2호
• /
• pp.601-610
• /
• 1999

Crossover design is officially except for special occasions recommended by KFDA and FDA for assessing Bioequivalence between two drugs one for reference and the other for innovator. Such design is regarded as a special case of latin square split-polt or repeated measurement design and its main difference with other designing methods is that each subject in an experiment is exposed two drugs in sequence. Therefore general statistical analysis is not suitable since the model for this experiment includes carryover effect in addition to period and sequence effect. in this paper analysis for crossover model with two drugs and its interpretation are mainly discussed and an example is given for illustration.

• BMB Reports
• /
• 제37권4호
• /
• pp.460-465
• /
• 2004

A 16-residue polypeptide model with the sequence acetyl-YALSLAATLLKEAASL-OH was derived by rational de novo peptide design. The designed sequence consists of amino acid residues with high propensity to adopt an alpha helical conformation, and sequential order was arranged to produce an amphipathic surface. The designed sequence was chemically synthesized using a solid-phase method and the polypeptide was purified by reverse-phase liquid chromatography. Molecular mass analysis by electro-spray ionization mass spectroscopy confirmed the correct designed sequence. Structural characterization by circular dichroism spectroscopy demonstrated that the peptide adopts the expected alpha helical conformation in 50% acetonitrile solution. Liposome binding assay using Small Unilamellar Vesicle (SUV) showed a marked release of entrapped glucose by interaction between the lipid membrane and the tested peptide. The channel-forming activity of the peptide was revealed by a planar lipid bilayer experiment. An analysis of the conducting current at various applied potentials suggested that the peptide forms a cationic ion channel with an intrinsic conductance of 188 pS. These results demonstrate that a simple rational de novo design can be successfully employed to create short peptides with desired structures and functions.

• 한국CDE학회논문집
• /
• 제18권1호
• /
• pp.1-9
• /
• 2013

Nowadays in order to perform assembly process planning by using CAPP (Computer Aided Process Planning), researches to generate the assembly sequence automatically have come under constant interest by many researchers and they are devoted to optimize the assembly sequence. In this paper, the product on analyzing the relationship between assembled parts via contacting information such as common area, automatically based on the liaison graph of the product. To verify the validness and efficiency of the approach, the simple product is tested in the experimental way.

• 한국CDE학회논문집
• /
• 제9권2호
• /
• pp.158-163
• /
• 2004

Curve tessellation, which generates a sequence of points from a curve, is very important for curve rendering on a computer screen and for NC machining. For the most case the sequence of discrete points is used rather than a continuous curve. This paper deals with a method of tessellation by calculating the maximal deviation of a curve. The maximal deviation condition is introduced to find the point with the maximal deviation. Our approach has two merits. One is that it guarantees satisfaction of a given tolerance, and the other is that it can be applied in not only a polynomial curve but its offset. Especially the point sequence generated from an original curve can cause over-cutting in NC machining. This problem can be solved by using the point sequence generated from the offset curve. The proposed method can be applied for high-accuracy curve tessellation and NC tool-path generation.