• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.734-737
• /
• 2001

A study was conducted in order to remove PVC from the waste plastic film mixture. The fittings of Air Table was modified to increase the separation efficiency of PVC. By using the improved air table, the PE and PVC was successfully separated from PVC-PE film mixture with the yield of PE 90% or more and with the content of PVC in PE 1% or less. The detail of the separation condition and result will be discussed in this paper.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 추계 총회 및 학술발표회
• /
• pp.164-164
• /
• 2004

• 한국생산제조학회지
• /
• 제24권4호
• /
• pp.407-413
• /
• 2015

Research for renewable energy is being performed since it has the merits of little pollution of the environment and sustainable energy resources. Microalgae is attractive as a renewable energy resource. Biomass of the microalgae can be produced by mass culturing, and bulk harvest technology of is needed to produce biomass continuously. Recently, ultrasonic waves were used to harvest the cultivated microalgae continuously. In this study, the separation process using ultrasonic waves was performed to effectively harvest the microalgae. An ultrasonic wave separation resonator was designed and manufactured based on the acoustic field analysis. Separation experiments using design of experiment were carried out, and the influence of experimental variables from the ultrasonic wave separation process was investigated. Mixing conditions of variables were estimated to obtain high separation efficiency and a large microalgae harvest. Experimental results for suitable mixing conditions were compared with simulation results calculated from the state equation.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
• /
• pp.3-7
• /
• 1999

Government efforts on membrane technology started in early 1980 with Membrane Development Program supported by the Ministry of Science and Technology. Several independent research projects on liquid separation, gas separation, hollow fiber producing program etc. were carried out during the 1980s. The RaCER was commissioned by MOCI for the general management of the project which had its aims in establishing the base for developing membranes, modules and systems for liquid separation in August 1993. More recently, in June 1995, a program for developing membranes for oxygen separation, nitrogen separation and hydrogen separation was initiated. This paper outlines the brief history of membrane technology development in Korea from the introduction of membrane filtration technology during the late 1960s to present.

• 반도체디스플레이기술학회지
• /
• 제9권2호
• /
• pp.21-25
• /
• 2010

In response to the industrial needs for automated handling of very thin solar cell wafers, this paper presents the design concept for the individual wafer separation from the stacked wafers by utilizing continuous water jet. The experimental apparatus for automated wafer separation was constructed and it includes the water jet system and the microprocessor controlled wafer stack advancing system. Through a series of tests, the performance of the proposed design is quantified into the success rate of single wafer separation and the rapidity of processing wafer stack. Also, the inclination angle of wafer equipped cartridge and the water jet flowrate are found to be important parameters to be considered for process optimization. The proposed design shows the concept for fast and efficient processing of wafer separation and can be implemented in the automated manufacturing of silicon based solar cell wafers.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권5호
• /
• pp.46-55
• /
• 2013

The main objective was to evaluate the efficiencies of different separation techniques, such as gravity separation, magnetic separation, and aerial separation. Zinc and cadmium removal efficiencies by gravity separation and magnetic separation were 28.3~29.3% and 19.1%, respectively, and were higher than the efficiency obtained by aerial separation. Results showed that the combination of gravity separation and magnetic separation in series which was to maximize the removal efficiencies gave removal efficiency of 21.5~38.7% for zinc and 22.1~23.4% for cadmium. The mass of soil meeting the regulation standards for zinc and cadmium after retrieval from the combined separation process accounted for approximately 80% of the treated soil that would be reusable without the pre-treatment procedure as the neutralization process using in the soil washing method. Physical separation techniques utilizing heavy metal properties are the alternative method to remediate heavy-metal contaminated soils in environmental and economic aspects.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2003년도 춘계 총회 및 학술발표회
• /
• pp.95-98
• /
• 2003

• 한국막학회:학술대회논문집
• /
• 한국막학회 2005년도 춘계 총회 및 학술발표회
• /
• pp.136-139
• /
• 2005

• 한국막학회:학술대회논문집
• /
• 한국막학회 2005년도 추계 총회 및 학술발표회
• /
• pp.221-222
• /
• 2005

• Composites Research
• /
• 제36권2호
• /
• pp.69-79
• /
• 2023

유수분리는 석유 생산, 폐수 처리 및 식품 가공을 포함한 다양한 산업 응용 분야와 해양 기름 유출과 같은 환경 분야에서 중요한 과정이다. 물-기름 혼합물의 분리 효율은 혼합물의 유형, 기름과 물의 상태, 적용하고자 하는 기술을 포함한 여러 요인에 의해 영향을 받을 수 있으며, 수년에 걸쳐 물리적, 화학적 및 생물학적 방법으로 물과 기름을 분리하기 위한 다양한 기술이 개발되어 오고 있다. 본 논문은 중력에 의한 분리, 원심 분리, 흡착재, 필터 등을 이용한 유수분리를 포함하여 물-기름 분리에 사용할 수 있는 다양한 방법과 기술에 대해 개략적으로 설명하고자 한다. 각 방법의 장점과 한계를 최근 연구 동향 및 향후 전망과 함께 논의한다. 또한 본 논문에서는 지속 가능하고 환경 친화적인 접근 방식에 특히 중점을 두고 유수분리 분야의 향후 연구와 산업 적용을 위한 방향성을 제시하고자 한다. 결론적으로 본 논문에서는 유수분리 분야의 연구자 및 산업 종사자에게 유용할 수 있는 최근 유수 분리 기술에 대한 포괄적인 개요를 제공하고자 한다.