• Archives of Pharmacal Research
• /
• v.24 no.6
• /
• pp.601-606
• /
• 2001

A simple assay method of recombinant human epidermal growth factor (rhEGF) in a pharmaceutical preparation was studied and validated by capillary electrophoresis (CE) using micellar electrokinetic chromatography (MEKC) techniques. Factors affecting the migration behavior and separation performances of the peptide; type of buffers pH, butler concentration, and concentration of sodium dodecyl sulfates (SDS) were investigated to optimize the analytical performance. CE was performed using running buffers 50.0 mM borate (pH 8.5) containing 12.5 mM SDS at 20 $mutextrm{V}$ of the applied voltage. Calibration curves for the rhEGF showed good linearity (r>0.999) over the wide dynamic range from 1.25 to $100{\mu\textrm{g}}/ml$. Sample analysis was performed by using standard addition method to eliminate the matrix effects of dosage vehicle. This method is assumed to be useful for quality control (QC) of various forms of pharmaceutical products of the peptide.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.823-827
• /
• 2008

The effects of blade leading edge sweep on both the aerodynamic performance and the structure stress of a high pressure centrifugal compressor impeller are numerically investigated. Changes in the flow structure occur as a result of the effect of leading edge sweep on the loading distribution in the tip region. The flow separation is avoided by introducing a sweep of the main blade leading edge and the strength of shock is reduced at the same time. Backswept of the leading edge is found to be beneficial to the impeller performance improving. On the other hand, the structural analysis indicated that high rotating speed of the impeller will cause substantial high bending stresses and radial deflections of the blade. Studies have shown that it is possible to control the stress distribution along the tip and root of the blade by slight adjustments to the sweep angle of the leading edge. These adjustments may be used to design the impeller with lower blade root stress distribution without aerodynamics performance penalty.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.310-313
• /
• 2008

Magnetohydrodynamics (MHD) devices have received considerable attention in recent years as a means to either improve the propulsive characteristics of hypersonic cruise missiles or as a means to generate power at low cost in drag and weight aboard scramjet powered vehicles. Based on more complete physical models than previously used, it is here argued that the use of MHD is not valuable in improving the performance of hypersonic propulsion systems through prevention of boundary layer separation or power bypass. This is due to the inevitable high amount of Joule heating accompanying MHD flow control having considerable undesired adverse effects on the engine performance. On the other hand, preliminary estimates indicate that MHD is likely to succeed in generating high amounts of power with little additional drag to feed megawatt-class energy weapons on-board scramjet engines.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.211-214
• /
• 2011

In the present work, a computational study was conducted to investigate characteristic of lateral force on the flow fields inside the propulsion nozzle with step. The unsteady, compressible, axisymmetric, Navier-Stocks equations with SST k-${\omega}$ turbulence model are solved using a fully implicit finite volume scheme. In order to simulate the shut-down process of the engine, NPR is varied from 100.0 to 10.0. It is observed that the separation point and Mach-disk strongly depend on the variation of NPR, and adjusting the step lead to significantly different characteristics in the lateral forces.

• Analytical Science and Technology
• /
• v.34 no.5
• /
• pp.202-211
• /
• 2021

Volatile organic compounds (VOCs) in hazardous air pollutants (HAPs) have been regulated by the Air Pollution Control Act (1978) and their atmospheric concentrations have been monitored in 39 monitor sites in Korea. However, measurement standards of volatile organic compounds (VOCs) in HAPs at ambient levels have not been established in Korea. Primary reference gas mixtures (measurement standards) at ambient levels are required for accurately monitoring atmospheric VOCs in HAPs and managing their emissions. In this study, primary reference gas mixtures (PRMs) at 5 nmol/mol were developed in order to establish primary national standards of VOCs in HAPs at ambient levels. Primary reference gas mixtures (PRMs) were prepared in pressurized aluminum cylinders with special internal surface treatment using gravimetric method. Analytical methods using gas chromatography-flame ionization detector (GC-FID) coupled with a cryogenic preconcentrator were also developed to verify the consistency of gravimetrically prepared HAP VOCs PRMs. Three different columns installed in the GC-FID were evaluated and compared for the retention times and separation of eighteen target components in a chromatogram. Results show that the HAP VOCs PRMs at 5 nmol/mol were consistent within a relative expanded uncertainty (k=2) of less than 3 % except acrylonitrile (less than 6 %) and the 18 VOCs were stable for 1 year within their associated uncertainties.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.355-361
• /
• 2011

The separation conditions for the enhancement of isoflavone contents in soybean by soaking and germination were developed, and the fermentation conditions of Chungkukjang were optimized by using response surface methodology analysis. The high-yield of isoflavone production was obtained when the conditions of soaking and gemination were at 25.6$^{\circ}C$, 7 hr and 29.1$^{\circ}C$, 42.4 hr, respectively. Total isoflavone contents in soybean (Daepung) by treatment were increased from 1,012 ppm to 1,912 ppm. Also, the optimum fermentation conditions of Chungkukjang were determined 39.96$^{\circ}C$, 1.32% (inoulum size) and 42.4 hr, respectively. Isoflavone contents in Chungkugjang under the optimum fermentation conditions were 1.3 times higher than the control (1,960 ppm).

• Korean Journal of Materials Research
• /
• v.29 no.2
• /
• pp.106-115
• /
• 2019

Recently, metal cases are widely used in smart phones for their luxurious color and texture. However, when a metal case is used, electric shock may occur during charging. Chip capacitors of various values are used to prevent the electric shock. However, chip capacitors are vulnerable to electrostatic discharge(ESD) generated by the human body, which often causes insulation breakdown during use. This breakdown can be eliminated with a high-voltage chip varistor over 340V, but when the varistor voltage is high, the capacitance is limited to about 2pF. If a chip capacitor with a high dielectric constant and a chip varistor with a high voltage can be combined, it is possible to obtain a new device capable of coping with electric shock and ESD with various capacitive values. Usually, varistors and capacitors differ in composition, which causes different shrinkage during co-firing, and therefore camber, internal crack, delamination and separation may occur after sintering. In addition, varistor characteristics may not be realized due to the diffusion of unwanted elements into the varistor during firing. Various elements are added to control shrinkage. In addition, a buffer layer is inserted in the middle of the varistor-capacitor junction to prevent diffusion during firing, thereby developing a co-fired product with desirable characteristics.

• Toxicological Research
• /
• v.35 no.2
• /
• pp.161-165
• /
• 2019

Cysteamine has been used in cosmetics as an antioxidant, a hair straightening agent, and a hair waving agent. However, recent studies indicate that cysteamine can act as an allergen to hairdressers. The objective of this study was to develop and validate a simple and effective reversed-phase high-performance liquid chromatography (RP-HPLC) method for the measurement of cysteamine and its dimer, cystamine. Sodium 1-heptanesulfonate (NaHpSO) was used as an ion-pairing agent to improve chromatographic performance. Separation was performed on a Gemini C18 column ($250mm{\times}4.6mm$, $5{\mu}m$ particle size) using a mobile phase composed of 85:15 (v/v) 4 mM NaHpSO in 0.1% phosphoric acid:acetonitrile. UV absorbance was monitored at 215 nm. The RP-HPLC method developed in this study was validated for specificity, linearity, limit of detection, limit of quantitation, precision, accuracy, and recovery. Cysteamine and cystamine were chromatographically resolved from other reducing agents such as thioglycolic acid and cysteine. Extraction using water and chloroform resulted in the recovery for cysteamine and cystamine ranging from 100.2-102.7% and 90.6-98.7%, respectively. This validated RP-HPLC method would be useful for quality control and monitoring of cysteamine and cystamine in cosmetics.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.4
• /
• pp.11-26
• /
• 2011

The existing anonymous authentication schemes based on group signatures for protecting privacy do not provide anonymous authorization which is required in the practical environments. In this paper, we propose an anonymous authentication and authorization scheme that enables a service provider both to authenticate anonymously its users and to provide different service according to their authorization. In the proposed scheme, a user's real identity, anonymity and authorization are managed distinctly through the separation of group manager's capabilities and an authorization authority. It is also possible for the proposed scheme to apply various access control models.

• Journal of Animal Reproduction and Biotechnology
• /
• v.36 no.4
• /
• pp.239-246
• /
• 2021

The immunological sperm separation method is economical compared to the existing sorting method, and it is promising for the development of new technologies by reducing sperm damage. Wholemom (WM) is a sex-regulating protein that comprises on immunoglobulin G coupled with magnetic nanoparticles (MNPs) that responds to surface proteins derived from the Y chromosome in cattle. Y sperms are restricted in motility as the WM aggregates them, and the magnet could separate the non-aggregated cells. This study was conducted to investigate the effect of WM treatment on the characteristics of bull sperm. After treating sperm with WM and incubation for 6 h, the motility parameters including total motility, progressive motility, velocity average path, velocity straight line, amplitude of lateral head displacement, and linearity were significantly higher in the WM treatment group than in the control group (p < 0.05). Sperm viability and acrosome reaction rates were similar in both groups during each incubation period (p > 0.05). In conclusion, the immunological sperm sexing procedure using a monoclonal antibody conjugated with MNPs did not affect the characteristics of bull sperm. This study suggests that compared to other techniques, the immunological method for sperm sexing could classify sperm quickly and efficiently without the use of expensive equipment.