• Title/Summary/Keyword: Separation condition

Search Result 866, Processing Time 0.039 seconds

Effect of Separation Between Main and Divergent Tunnels in Divergence Section of Double-Deck Tunnel on the Stability (복층터널 분기구에서의 터널 이격에 따른 안정성 영향)

  • La, You-Sung;Kim, Bum-Joo
    • Journal of the Korean Geosynthetics Society
    • /
    • v.15 no.2
    • /
    • pp.45-54
    • /
    • 2016
  • Double deck tunnels are considered to have a large demand in a near future for solving traffic congestion problems and overcoming the limitations in constructing new tunnels. This study presents a numerical investigation using finite element (FE) analysis on the behaviors of the tunnels and the stability of pillars in a divergence section where single tunnel is diverged from a main line double deck tunnel. The effects of the separation distance between the diverged and the main tunnels and the ground condition were examined through the FE analysis by varying the separation distance from 0.1D to 2.0D (D: diameter of main tunnel) and the rock class from class I to V, respectively, and the analysis results were compared with those using empirical methods, strength-stress ratio, and the volume of interference. The FE analysis results indicated that the separation distance has a larger effect on tunnel behaviors, compared with the rock strength, and a single tunnel with a large cross section is more favorable than two separated tunnels for tunnel stability when the separation distance is below 0.7D.

A Study on the Separation of Activated Sludge by Dissolved Air Flotation (가압부상법(加壓浮上法)에 의한 활성(活性)슬러지 혼합액(混合液)의 고액분리(固液分離)에 관한 연구(研究))

  • Yang, Sang Hyun;Ra, Deog Gwan
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.5 no.3
    • /
    • pp.21-29
    • /
    • 1985
  • An effective technique of sludge separation is required for concentrated activated sludge process. The dissolved-air flotation (DAF) has been shown to be efficient process for sludge separation. The factors affecting DAF process for activated sludge separation are type and concentration of sludge, air/solid ratio, ratio of pressurized water flow, pressure, sludge detention time, temperature, sludge and hydraulic loading rate, recycle flow rate of sludge and type and quantity of chemical aid. In order to study the optimal operation condition for sludge separation, the influence factors such as type and concentration of sludge, ratio of pressurized water flow and pressure are investigated by the batch and continuous reactor experiments of DAF and sedimentation test. By the experimental investigation, the results are as follows; 1. For the bulking and concentrated sludge, DAF is more effective than sedimentation for the sludge separation. 2. In DAF, the critical ratio of pressurized water flow exist. The critical value varies with the pressure in the tank. That is, according to the pressure changes from 3 to $5kg/cm^2$, the critical value varies from 0.25 to 0.67 accordingly. 3. Pressure affects the ratio of pressurized water flow, but it does not show any influence upon the DAF efficiency directly. 4. Continuous experimental results was not better than those of batch.

  • PDF

Stability of the Grain Configurations of Thin Films-a Model for Agglomeration (박막내 결정립 배열의 열적 불안정성1)-응집 모델)

  • Na, Jong-Ju;Park, Jung-Geun
    • 연구논문집
    • /
    • s.27
    • /
    • pp.183-200
    • /
    • 1997
  • We have calculated the energy of three distinct grain configurations, namely completely connected, partially connected and unconnected configurations, evolving during a spheroidization of polycrystalline thin film by extending a geometrical model due to Miller et al. to the case of spheroidization at both the surface and film-substrate interface. "Stabilitl" diagram defining a stable region of each grain configuration has been established in terms of the ratio of grain size to film thickness vs. equilibrium wetting or dihedral angles at various interface energy conditions. The occurrence of spheroidization at the film-substrate interface significantly enlarges the stable region of unconnected grain configuration thereby greatly facilitating the occurrence of agglomeration. Complete separation of grain boundary is increasingly difficult with a reduction of equilibrium wetting angle. The condition for the occurrence of agglomeration differs depending on the equilibrium wetting or dihedral angles. The agglomeration occurs, at low equilibrium angles, via partially connected configuration containing stable holes centered at grain boundary vertices, whereas it occurs directly via completely connected configuration at large equilibrium angles except for the case having small surface and/or film-substrate interface energy. The initiation condition of agglomeration is defined by the equilibrium boundary condition between the partially connected and unconnected configurations for the former case, whereas it can, for the latter case, largely deviate from the equilibrium boundary condition between the completely connected and unconnected configurations because of the presence of a finite energy barrier to overcome to reach the unconnected grain configuration.

  • PDF

Effects of the Inlet Boundary Layer Thickness on the Loss Mechanism in an Axial Compressor (입구 경계층 두께가 축류 압축기 손실에 미치는 영향)

  • Choi, Minsuk;Baek, Jehyun
    • 유체기계공업학회:학술대회논문집
    • /
    • 2004.12a
    • /
    • pp.419-426
    • /
    • 2004
  • A three-dimensional computation was conducted to understand effects of the inlet boundary layer thickness on the loss mechanism in a low-speed axial compressor operating at the design condition(${\phi}=85\%$) and near stall condition(${\phi}=65\%$). At the design condition, the flow phenomena such as the tip leakage flow and hub comer stall are similar independent of the inlet boundary layer thickness. However, when the axial compressor is operating at the near stall condition, the large separation on the suction surface near the casing is induced by the tip leakage flow and the boundary layer on the blade for thin inlet boundary layer but the hub corner stall is enlarged for thick inlet boundary layer. These differences of internal flows induced by change of the boundary layer thickness on the casing and hub enable loss distributions of total pressure to be altered. When the axial compressor has thin inlet boundary layer, the total pressure loss is increased at regions near both casing and tip but decreased in the core flow region. In order to analyze effects of inlet boundary layer thickness on total loss in detail, using Denton's loss models, total loss is scrutinized through three major loss categories in a subsonic axial compressor such as profile loss, tip leakage loss and endwall loss.

  • PDF

Constituents Analysis of Amino Acid and Antioxidative Activity from Cultivated Callus and Rhizome in Rhodiola sachalinensis

  • Song, Won-Seob;Chi, Hyung-Joon;Rim, Yo-Sup;Yoon, Jae-Ho
    • Plant Resources
    • /
    • v.5 no.1
    • /
    • pp.78-85
    • /
    • 2002
  • The material of Rhodiola sachatinensis collected from an alpine region of the west-northern China. For analysing the effect, 1 used Rhodiola sachatinensis's rhizome and cultivated callus. In EtOAc, BuOH, $H_2O$ separation the plant showed strong antioxidative activity, but not in Hexane. The radical scavenging effect of EtOAc(RC$_{50}$,35(g), BuOH(RC$_{50}$, 43(g), H$_2$0(RC$_{50}$, 50(g) fraction and MeOH extract(RC$_{50}$, 50(g) of the Rhodiola sachatinensis was comparable to that of synthetic antioxidant BHA(RC$_{50}$, 14(g) and $\alpha$-Tocopherol(RC$_{50}$, 12(g). Total amino acid concentration of plant of In nature condition were 18,009ppm, and major components were arginine, glutamic acid, aspartic acid and valine. The ratio of essential/total amino acid on plant of In nature condition was 46.93%. Total amino acid concentration of callus of In vitro condition were 32,435ppm, and major components were valine, histidine, lysine and leucine. The ratio of essential/total amino acid on callus of In vitro condition was 56.07%. was 56.07%.

  • PDF

TREATMENT OF CHINESE CABBAGE JUICE

  • Kim, S. H.;N. Proydak;B. S. Shin
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 2000.11c
    • /
    • pp.792-802
    • /
    • 2000
  • The coagulation of Chinese cabbage juice can be accomplished by applying the combine method of the formic acid with rate of 3% and in four hours the propionic acid with rate of 1 % in the juice. The separation of coagulation into the protein paste and the brown juice completed in 6.5 hours by set up method in special storage. The protein paste can be stored safely for 30 days in anaerobic condition.

  • PDF

Digita Redesign of Observer-Based Output Feedback Controller

  • Lee, Ho-Jae;Park, Jin-Bae;Cho, Kwang-Lae;Joo, Young-Hoon
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 2002.10a
    • /
    • pp.64.5-64
    • /
    • 2002
  • This paper concerns a new digital redesign (DR) technique for an observer-based output-feedback control (OBOFC) system. The term DR involves converting an analog controller into an equivalent digital one in the sense of state-matching. The considered DR problem is formulated as convex minimization problems of the norm distances between linear operators to be matched. The stability condition is easily embedded and the separation principle on the DR of the OBOFC is explicitly shown. A numerical example is included for visualizing the feasibility of the proposed technique.

  • PDF

Effect of the Rebar Corrosion Rate on Bond Strength in Reinforced Concrete - Factors caused by compressive strength and embedded rebar condition - (철근의 부식도가 콘크리트의 부착강도에 미치는 영향 - 콘크리트 강도와 철근매입 조건을 인자로 하여 -)

  • 김현욱;지남용;윤상천
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2002.10a
    • /
    • pp.537-542
    • /
    • 2002
  • The social trouble to the durability of concrete rises recently because the embedded rebar corrosion influences concrete structures to deteriorate structural capacity. And also, the rebar corrosion causes crack of concrete, decrease of steel section and separation of covering concrete. In the result, the bond strength of concrete and embedded rebar decreases, which causes deterioration of the structure behavior in reinforced concrete. In this study, the relation of bond strength and bond-slip was understood to evaluate capacity deterioration of reinforced concrete, and experiments were carried out by compressive strength and embedded rebar condition in the rebar corrosion rate.

  • PDF

A New HPLC Condition for the Analysis of Aclacinomycins A and Y in the Mixtures of Aclacinomycins

  • Kim, Wan Seop;Won Tae Cho;Myung Kook Kim;Sang Ki Rhee;Hak Ryul Kim;Eul Sung Choi
    • Journal of Microbiology and Biotechnology
    • /
    • v.5 no.5
    • /
    • pp.302-304
    • /
    • 1995
  • As the previous HPLC method (Ogasawara et al., 1983) was described for the analysis of aclacinomycin A and some of its analogue compounds but not for aclacinomycin Y, we developed novel HPLC condition by optimizing solvent system. The newly developed solvent system allowed a complete separation of aclacinomycins Y and A, as opposed to the incomplete resolution of these two compounds in conventional method. The amounts of aclacinomycins Y and A could be accurately determined when the fermentation broth of Streptomyces lavendofoliae DKRS was analyzed by the newly developed method.

  • PDF

Arc Phenomena and Induced Voltage due to Inductive Energy of Superconducting Coil (초전도 코일의 유도성 에너지에 의한 아크현상과 유기 과전압)

  • 최병주;류경우;성기철;김해종
    • Progress in Superconductivity and Cryogenics
    • /
    • v.2 no.1
    • /
    • pp.24-30
    • /
    • 2000
  • This paper present the characteristics of the internal induced voltage and arc phenomena in liquid helium at the energy transfer from a superconducting magnet to a load resistor. Especially generation mechanism of the oscillated wave from of the coil terminal voltage is analyzed by considering circuit constant of the superconducting magnet, load condition and arc resistance of the mechanical opening switch. The wavefront and peak portion of the voltage are strongly influenced by arc discharge triggered by the switch separation in liquid helium. Abrupt arc extinction leads to voltage oscillation with an enormous peak. It is suggested that the superconducting magnet should be designed to ensure the internal surge when arc is possibly formed by switch opening or coil short circuit between turns or layers. Finally, a suppression method of the oscillating surge is proposed based on the load condition.

  • PDF