• 멤브레인
• /
• 제4권3호
• /
• pp.142-151
• /
• 1994

역삼투 공정을 농축공정에 이용하기 위해 향류식 역삼투 나권형 모듈을 고안, 제작하여 염수의 농축실험을 수행하였다. 역삼투 분리의 배제도와 농축도의 관계를 고찰한 결과, 배제유량에 대한 투과유량의 비가 양쪽 관계의 중요한 매개 변수이며, 반사계수 값에 따라, 역삼투막의 배제도와 농축도가 Spiegler-Kedem 식의 경향을 따른다. 향류식 역삼투 공정은 일반 역삼투 농축 공정에 비해 농축의 장애 요소인 삼투압차를 효과적으로 저하시키는 효과가 있으며 농축도가 상대적으로 우수하였다. 향류식 나권형 모듈의 수치모사 결과 농축공정의 농축도 증가를 위해서는 모듈의 지름보다 모듈의 길이를 늘리는 것이 유리함을 알 수 있었다.

• 한국해양학회지
• /
• 제28권1호
• /
• pp.17-23
• /
• 1993

회전반 위에서 상하경계면이 경사진 (${\beta}-effect$) 원통용기에 이층유체를 만들어 하층에 같은 밀도를 갖는 외부유체를 주입하여 경계면 변형에 따른 상층유체의 흐름을 관찰하였다. 상하층유체간의 경계면마찰을 최소화하여 하층유체운동(Sverdrup type) 에 따른 경계면의 변화에 적응하기 위한 상승유체 흐름은 internal Frounde Number($F_1$)에 민감하게 반응함을 보인다. 특히 $F_1$값이 6이상인 경우에는 상층유체운동 특성인 두 개의 폐쇄순환의 방향이 반대가 되어 서안경계류의 분리현상을 나타내고 있다. 서안에서의 분리 지점 역시 $F_1$값에 의존하며, 특히 $F_1{\;}~{\;}6$인 경우 가장 북쪽에서 분리되는 현상을 보였다.

• 한국항공운항학회지
• /
• 제27권4호
• /
• pp.9-20
• /
• 2019

A military aircraft generally includes external stores such as fuel tanks or external arming, depending on the purpose of the operation. When a store is dropped from a military aircraft at high subsonic, transonic, or supersonic speeds, the aerodynamic forces and moments acting on the store can be sufficient to send the store back into contact with the aircraft. This can cause damage to the aircraft and endanger the life of the crew. In this study, time accurate computational fluid dynamics (CFD) with dynamic moving grid (moving and deformable mesh, MDM) technique has been used to accurately calculate store trajectories. For the verification of the present numerical approach, a wind tunnel test model for the wing-pylon-finned store configuration has been considered and analyzed. The comparison results for the ejected store trajectories between the present numerical analysis and the wind tunnel test data at the Mach number of 0.95 and 1.2 are presented. It is also importantly shown that the numerical parameter of MDM technique gives significant effect for the calculated store trajectory in the low-supersonic flow such as Mach 1.2.

• ETRI Journal
• /
• 제43권4호
• /
• pp.702-716
• /
• 2021

This work proposes suitable network configurations for single frequency networks (SFNs) with ATSC 1.0 based on network coverage calculations and the laboratory multipath handling performance of commercial receivers. SFNs are widely used for delivering terrestrial digital television services because of their efficient use of the spectrum. In Mexico the analogue television transmissions switch-off occurred on 31 December 2016. Thus it is expected the adopted ATSC 1.0 system will be in force for the next several years despite the recent standardization of the ATSC 3.0 system. As ATSC 1.0 uses 8-VSB modulation the multipath handling capability of receivers is critical for the design of SFNs. The presented network planning results help develop technical normativity for implementing SFNs in Mexico and other countries that use ATSC 1.0. SFNs with transmitter separation up to 130 km are fully covered for outdoor reception mainly due to the directivity of the receiving antenna. Moreover for indoor reception at least 70% of an SFN coverage area can be achieved with a transmitter separation of up to 60 km depending on the radiated power and the transmitter antenna height.

• Steel and Composite Structures
• /
• 제39권5호
• /
• pp.543-564
• /
• 2021

In this study free vibration analysis of a cracked Goland composite wing is investigated. The wing is modelled as a cantilevered beam based on Euler- Bernoulli equations. Also, composite material is modelled based on lamina fiber-reinforced. Edge crack is modelled by additional boundary conditions and local flexibility matrix in crack location, Castigliano's theorem and energy release rate formulation. Governing differential equations are extracted by Hamilton's principle. Using the separation of variables method, general solution in the normalized form for bending and torsion deflection is achieved then expressions for the cross-sectional rotation, the bending moment, the shear force and the torsional moment for the cantilevered beam are obtained. The cracked beam is modelled by separation of beam into two interconnected intact beams. Free vibration analysis of the beam is performed by applying boundary conditions at the fixed end, the free end, continuity conditions in the crack location of the beam and dynamic stiffness matrix determinant. Also, the effects of various parameters such as length and location of crack and fiber angle on natural frequencies and mode shapes are studied. Modal analysis results illustrate that natural frequencies and mode shapes are affected by depth and location of edge crack and coupling parameter.

• Journal of Astronomy and Space Sciences
• /
• 제40권3호
• /
• pp.123-129
• /
• 2023

This paper presents an analysis of the trans-lunar trajectory insertion performance of the Korea Pathfinder Lunar Orbiter (KPLO), the first lunar exploration spacecraft of the Republic of Korea. The successful launch conducted on August 4, 2022 (UTC), utilized the SpaceX Falcon 9 rocket from Cape Canaveral Space Force Station. The trans-lunar trajectory insertion performance plays a crucial role in ensuring the overall mission success by directly influencing the spacecraft's onboard fuel consumption. Following separation from the launch vehicle (LV), a comprehensive analysis of the trajectory insertion performance was performed by the KPLO flight dynamics (FD) team. Both orbit parameter message (OPM) and orbit determination (OD) solutions were employed using deep space network (DSN) tracking measurements. As a result, the KPLO was accurately inserted into the ballistic lunar transfer (BLT) trajectory, satisfying all separation requirements at the target interface point (TIP), including launch injection energy per unit mass (C3), right ascension of the injection orbit apoapsis vector (RAV), and declination of the injection orbit apoapsis vector (DAV). The precise BLT trajectory insertion facilitated the smoother operation of the KPLO's remainder mission phase and enabled the utilization of reserved fuel, consequently significantly enhancing the possibilities of an extended mission.

• 한국항공우주학회지
• /
• 제32권8호
• /
• pp.47-53
• /
• 2004

타원형 날개꼴의 공력 특성에 브로잉 제트 방식과 제트 방향의 영향에 대하여 실험을 통하여 연구를 수행하였다. 본 연구는 타원형 날개꼴의 박리제어에 있어서 브로잉 제트적용에 관한 기본 데이터를 축적하는데 목적을 두었다. 본 연구에서는 날개면에서의 압력 분포, 브로잉 제트 출구에서의 유속 분포 및 공력 자료를 제공하였다. 타원형 날개꼴에 대한 실험은 레이놀즈수 $8.22{\times}10^5$에서 수행하였다. 펄스제트는 후실속각 이후에 공력 특성을 향상시키는 효과를 보여 주었다. 즉, 펄스제트는 감소된 질량유동율로 상당히 높은 양력을 발생하였다. 제트 방향도 박리제어의 주요 파라미터임을 보였다. 양의 제트각은 박리를 지연시키거나 억제하였고, 음의 제트각은 박리를 오히려 촉진시켰다.

• 정보처리학회논문지B
• /
• 제10B권4호
• /
• pp.397-402
• /
• 2003

본 연구에서는 뉴우턴법의 고정점 알고리즘에 적응 조정이 가능한 학습 파라미터를 이용한 효율적인 신경망 기반 독립성분분석기법을 제안하였다. 이는 엔트로피 최적화 함수의 1차 미분을 이용하는 뉴우턴법의 고정점 알고리즘에서 학습율과 모멘트를 역혼합행렬의 경신 상태에 따나 적응조정되도록 함으로써 분리속도와 분리성능을 개선시키기 위함이다 제안된 기법을 256$\times$256 픽셀의 8개 지문과 512$\times$512 픽셀의 10개 영상으로부터 임의의 혼합행렬에 따라 발생되는 지문과 영상의 분리에 적용한 결과, 기존의 고정점 알고리즘에 의한 결과보다 우수한 분리성능과 빠른 분리속도가 있음을 확인하였다. 특히 제안된 알고리즘은 문제의 규모가 클수록 분리성능과 분리속도의 개선 정도가 큼을 확인하였다.

• Membrane and Water Treatment
• /
• 제7권3호
• /
• pp.223-240
• /
• 2016

In this study, poly(vinyl-alcohol) and water insoluble ${\beta}$-cyclodextrin polymer (${\beta}$-CDP) cross-linked with citric acid, have been used as macrocyclic carrier in the preparation of polymer inclusion membranes (PIMs) for aniline (as molecule model) extraction from aqueous media. The obtained membranes were firstly characterized by X-ray diffraction, Fourier transform infrared and water swelling test. The transport of aniline was studied in a two-compartment transport cell under various experimental conditions, such as carrier content in the membranes, stirring rate and initial aniline concentration. The kinetic study was performed and the kinetic parameters were calculated as rate constant (k), permeability coefficient (P) and flux (J). These first results demonstrated the utility of such polymeric membranes for environmental decontamination of toxic organic molecules like aniline. Predictive modeling of transport flux through these materials was then studied using design of experiments; the design chosen was a two level full factorial design $2^k$. An empirical correlation between aniline transport flux and independent variables (Poly ${\beta}$-CD membrane content, agitation speed and initial aniline concentration) was successfully obtained. Statistical analysis showed that initial aniline concentration of the solution was the most important parameter in the study domain. The model revealed the existence of a strong interaction between the Poly ${\beta}$-CD membrane content and the stirring speed of the source solution. The good agreement between the model and the experimental transport data confirms the model's validity.

• 한국병원경영학회지
• /
• 제8권2호
• /
• pp.93-110
• /
• 2003

Fiscal crisis in the medical insurance has put the pressure upon hospitals by increasing the rate of curtailment, since the implementation of the separation between prescription and dispensing of Drug. The purpose of this study is to analyze the curtailment for antibiotics, injected drug and other drugs expenditure before and after the system of separation between prescribing and dispensing. Data were gathered from 13 general hospitals and used for analysis of trends on antibiotics and injected drug expenditure, and curtailment in 2000-2001 at three months intervals. The results were as follows; The curtailment rate of antibiotics expenditure has been increased in outpatient and inpatient since 2000. The curtailed antibiotics cost and injected drug cost in outpatient under the prescription within the hospital and in inpatient increased. The ratios of curtailment versus expenditure had increased in antibiotics, injected drugs, anticancer drugs, antiulcer drugs, albumine, antiinflammatory drugs. These results suggest that claim review system in social health insurance were over-focused mainly to control the cost and it might to impede the validity of claim review function in health insurance system. Therefore, it's needed to develope the scientific and reasonable parameter & criteria for claim review of drug expenditure.