• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.559-564
• /
• 2008

A prediction of binary droplets collision is important in the formation of falling drops and the evolution of sprays. The droplet velocity, impact parameter and drop-size ratio have influence on the interaction of the droplets. By the effect of these parameter, the collision processes are generated with the complicated phenomena. The droplet collision can be classified into four interactions such as the bouncing, coalescence, reflexive separation and stretching separation. In this study, the two-phase flow of the droplet collision was simulated numerically by using the Level Set method. 2D axi-symmetric simulations on the head-on collisions in the coalescence and reflexive separation, and 3D simulation on the off-center collisions in the coalescence and stretching separation were performed. These numerical results showed good agreements with the experimental and analytical results. For tracking the identity of droplets after the collision, transport equation for the volume fraction of the each initial droplet were used. From this, the identities of droplets were analyzed on the collision of droplets having different size.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권5호
• /
• pp.352-357
• /
• 2000

This paper presents about an example of circuit design and characteristics of inverter according to the variable capacitance of the DC voltage source separation capacitor used in ZVS-HB type high frequency resonant inverter. The soft switching technology known as ZVS is used to reduce turn off loss at switching. In the event the capacitance of the DC voltage source separation capacitor is varied, the analysis of inverter circuit has generally described by using normalized parameter and operating characteristics have been evaluated in terms of switching frequency and parameters. According to the calculated characteristics value, a method of the circuit designs and operating characteristic of the inverter is also presented in this paper. In addition, this paper proves the validity of theoretical analysis through the experiment. This proposed inverter shows that it can be practically used in future as power source system for the lighting equipment of discharge lamp, DC-DC converter etc.

• Korean Membrane Journal
• /
• 제9권1호
• /
• pp.27-33
• /
• 2007

PVDF membrane formation via TIPS was performed for PVDF/DBP and PVDF/DMP systems. PVDF/DBP system showed solid-liquid phase separation behavior, while PVDF/DMP system has liquid-liquid phase separation characteristic as well as solid-liquid phase separation characteristic. PVDF contents and cooling conditions had great influence on structure, and the effects of each parameter were examined. Spherulitic structure was obtained due to the dominant PVDF crystallization. Diluent rejected to the outside of spherulite occupied the surface of the PVDF spherulites to result in the microporous spherulite formation and micro-void between spherulites. PVDF/DMP system had competitive solid-liquid and liquid-liquid phase separation depending on the cooling path.

• 한국물환경학회지
• /
• 제36권6호
• /
• pp.489-499
• /
• 2020

Effective science-based management of the basin water resources requires an understanding of the characteristics of the streams, such as the baseflow discharge. In this study, the base flow was estimated in the two watersheds with the least artificial factors among the Nakdong River watersheds, as determined using the chemical hydrograph separation technique. The 16-year (2004-2019) discontinuous observed stream flow and electrical conductivity data in the Total Maximum Daily Load (TMDL) monitoring network were extended to continuous daily data using the TANK model and the 7-parameter log-linear model combined with the minimum variance unbiased estimator. The annual base flows at the upper Namgang Dam basin and the upper Nakdong River basin were both analyzed to be about 56% of the total annual flow. The monthly base flow ratio showed a high monthly deviation, as it was found to be higher than 0.9 in the dry season and about 0.46 in the rainy season. This is in line with the prevailing common sense notion that in winter, most of the stream flow is base flow, due to the characteristics of the dry season winter in Korea. It is expected that the chemical-based hydrological separation technique involving TANK and the 7-parameter log-linear models used in this study can help quantify the base flow required for systematic watershed water environment management.

• Wind and Structures
• /
• 제37권6호
• /
• pp.445-460
• /
• 2023

Accurate estimation of modal parameters (i.e., natural frequency, damping ratio) of tall buildings is of great importance to their structural design, structural health monitoring, vibration control, and state assessment. Based on the combination of variational mode decomposition, smoothed discrete energy separation algorithm-1, and Half-cycle energy operator (VMD-SH), this paper presents a method for structural modal parameter estimation. The variational mode decomposition is proved to be effective and reliable for decomposing the mixed-signal with low frequencies and damping ratios, and the validity of both smoothed discrete energy separation algorithm-1 and Half-cycle energy operator in the modal identification of a single modal system is verified. By incorporating these techniques, the VMD-SH method is able to accurately identify and extract the various modes present in a signal, providing improved insights into its underlying structure and behavior. Subsequently, a numerical study of a four-story frame structure is conducted using the Newmark-β method, and it is found that the relative errors of natural frequency and damping ratio estimated by the presented method are much smaller than those by traditional methods, validating the effectiveness and accuracy of the combined method for the modal identification of the multi-modal system. Furthermore, the presented method is employed to estimate modal parameters of a full-scale tall building utilizing acceleration responses. The identified results verify the applicability and accuracy of the presented VMD-SH method in field measurements. The study demonstrates the effectiveness and robustness of the proposed VMD-SH method in accurately estimating modal parameters of tall buildings from acceleration response data.

• 대한기계학회논문집
• /
• 제11권2호
• /
• pp.345-353
• /
• 1987

본 연구에서는 구 주위의 혼합대류에 대하여 전 영역에 걸쳐 유효한 매개변수 를 차원해석에 의해 유도하고 이를 적용하여 지배방정식을 비상사 경계층 방정식의 형 태로 변환하고 이를 유한차분법에 의해 수치적으로 해석하였다. 단순 강제대류에서 부터 단순 자연대류 까지의 전 영역에 걸쳐 구 주위의 속도 및 온도분포,국소열전달계 수 및 마찰계수를 Gr/Re$^{2}$의 함수로 구하였으며 Prandtl수가 0.7과 7인 유체에 대 하여 계산을 수행함으로써 Prandtl수의 변화에 따른 강제대류 및 자연대류의 비교강도 의 영향에 대하여 고찰하였다. 자연대류의 영향에 의한 벽면에서의 운동에너지증가 에 따른 유동의 박리점 이동에 대하여도 고찰하였다.

• 한국가시화정보학회지
• /
• 제17권3호
• /
• pp.46-51
• /
• 2019

Rotor wake interaction must be considered to understand the quadrotor flight, and the rotor separation distance is an important parameter that affects the rotor wake interaction. In this study, the wake characteristics were investigated with varying the rotor separation distance. The velocity field in the rotor wake was measured using digital PIV for hovering mode at Re = 34,000, and the wake boundaries from the inner and outer rotor tips were quantitatively compared with varying the rotor separation distance. The symmetric rotor-tip vortex shedding about the rotor axis was found at a large rotor separation distance. However, the wake boundary became more asymmetric about the rotor axis with decreasing the rotor separation distance. At the minimum rotor separation distance, in particular, a faster vortex decay was observed due to a strong vortex interaction between adjacent rotors.

• 공업화학
• /
• 제4권3호
• /
• pp.583-590
• /
• 1993

키토산 유도체 중 약한 음이온 교환기를 갖는 O-Diethylaminoethyl 키토산을 제조하여, 이를 크로마토그래피의 고정상으로 이용하여 생체단백질의 하나이며 등전점이 서로 다른 알부민과 라이소자임의 분리에 응용하였다. 우선 산성 염료와 염기성 염료를 이용하여 고정상으로서의 응용 가능성을 검토하였고 용매에 의한 극성효과도 검토하였다. 이것을 토대로 하여 크로마토그래피의 분리에 미치는 제반인자를 구하였다. 용매로써는 물과 메탄을 공용매를 사용하였고 이 경우 극성값이 증가할수록 분리능이 증가하였으며 가장 좋은 분리능은 치환도가 0.23인 경우 분리도가 1.42였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.435-440
• /
• 2006

The Reduced Vertical Separation Minimum (RVSM), which is the reduced minimum from 2,000 ft to 1,000 ft at flight levels (FL) between 290 and FL410 inclusive, was implemented in 30 September 2005 within the Japanese domestic airspace. Prior to the implementation, safety assessment for the airspace in assumed RVSM environments was carried out. Some model parameter values of collision risk model were estimated using flight plan (progress) data and radar data. An estimate of vertical collision risk including operational risk was calculated using these together with given parameter values. The results obtained from this analysis are as follows. (1) Contribution of the vertical collision risk for the crossing routes is about 9 percents of the total technical risk. (2) The estimate of the collision risk is $4.1{\times}10^{-9}$ [fatal accidents / flight hour] and the value is smaller than a maximum allowable level of collision risk, i.e. $5{\times}10^{-9}$ [fatal accidents / flight hour], called the Target Level of Safety.

• Current Optics and Photonics
• /
• 제8권1호
• /
• pp.30-37
• /
• 2024

Implemented at the Geochang Observatory in South Korea, our slope detection and ranging (SLO-DAR) system features a 508 mm Cassegrain telescope (f /7.8), incorporating two Shack-Hartmann wave-front sensors (WFS) for precise measurements of atmospheric phase distortions, particularly from nearby binary or double stars, utilizing an 8 × 8 grid of sampling points. With an ability to reconstruct eight-layer vertical atmospheric profiles, the system quantifies the refractive index structure function (C_n²) through the crossed-beam method. Adaptable in vertical profiling altitude, ranging from a few hundred meters to several kilometers, contingent on the separation angle of binary stars, the system operates in both wide (2.5 to 12.5 arcminute separation angle) and narrow modes (11 to 15 arcsecond separation angle), covering altitudes from 122.3 to 611.5 meters and 6.1 to 8.3 kilometers, respectively. Initial measurements at the Geochang Observatory indicated C_n² values up to 181.7 meters with a Fried parameter (r₀) of 8.4 centimeters in wide mode and up to 7.8 kilometers with an r₀ of 8.0 centimeters in narrow mode, suggesting similar seeing conditions to the Bohyun Observatory and aligning with a comparable 2014-2015 seeing profiling campaign in South Korea.