• 물과 미래
• /
• 제26권4호
• /
• pp.73-83
• /
• 1993

본 연구에서는 우리나라 강우자료에 대한 분리효과를 검토하였다. 2변수 대수정규분포, 3변수 대수정규분포등, TYPE-극치분포, 2변수 Gamma 분포, 3변수 Gamma 분포, Log-Pearson Type-분포, GEV분포 등 7개 분포함수를 선정하고, Monte C미개 실험을 이용하여 과거 강우기록 자료로부터 얻은 왜곡도의 평균과 표준편차와 각 분포형들로부터 모의된 왜곡도의 평균과 표준편차와 차이를 분석하였다. 그 결과 우리나라 강우자료는 3변수 Gamma 분포를 제외한 나머지 6개 분포형에서 분리현상을 보였다.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2003년도 10월 학술대회지
• /
• pp.25-28
• /
• 2003

The aim of this paper is to analyze the pathological voice by separating signal into periodic and aperiodic part. Separation was peformed recursively from the residual signal of voice signal. Based on initial estimation of aperiodic part of spectrum, aperiodic part is decided from the extrapolation method. Periodic part is decided by subtracting aperiodic part from the original spectrum. A parameter HNR is derived based on the separation. Parameter value statistics are compared with those of Jitter and Shimmer for normal, benign and malignant cases.

• 물과 미래
• /
• 제29권1호
• /
• pp.129-139
• /
• 1996

수공구조물의 계획과 설계에 있어서 수문자료에 대한 적정분포형을 선정하는 것은 매우 중요하며, 선정된 분포함수가 실측자료의 통계학적 특성을 잘 나타내고 있는가를 검토하는 것은 필수적인 과제이다. 본 연구에서는 전국 22개 지점, 7개 지속기간의 강우자료에 대하여 2변수 및 3변수 gamma, 2변수 및 3변수 lognormal, Gumbel, 2변수 및 3변수 log-Gumbel, GEV, log-Pearson type III, 2변수 및 3변수 Weibull, 4변수 및 5변수 Wakeby 분포를 적용하여 모멘트법, 확률가중 모멘트법, 최우도법 등으로 각 분포형의 매개변수를 추정하고, 적합성 조건을 검사하였다. 각 매개변수 추정법에 의하여 추정된 매개변수를 이용하여 10,000번 모의 발생하여 분리효과를 검토한 결과 매개변수 적합성을 고려한 경우 모멘트법에서는 log-Pearson type III 분포, 확률가중 모멘트법에서는 log-Pearson type III와 GEV 분포, 최우도법에서는 GEV 분포가 분리효과를 가장 작게 나타냈으며, 2변수 분포형의 경우 모두 분리효과가 크게 나타났다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.304-308
• /
• 2000

In this work, an equation of J-integral for a penny-shaped crack at the end of the cord embedded in rubber matrix is proposed. The dimensional analysis is applied to derived to the equation of J-integral. We assume that the energy Parameter J is separated into the deformation and the geometry function, and which is proved using by separation parameter.

• 대한기계학회논문집
• /
• 제17권12호
• /
• pp.3135-3147
• /
• 1993

A numerical method is presented which can solve the steady flow and heat transfer from a rotating and heated circular cylinder in a uniform flow for a range of Reynolds number form 5 to 100. The steady response of the flow and heat transfer is simulated for various spin parameter. The effects on the flow field and heat transfer characteristics known as lift, drag and heat transfer coefficient are analyzed and the streamlines, velocity vectors, vorticity, temperature distributions around it were scrutinized numerically. As spin parameter increases the region of separation vortex becomes smaller than upper one and the lower region will vanish. The lift force, a large part is due to the pressure force, increases as the Reynolds number and it increases linearly as spin parameter increases. The pressure coefficient changes rapidly with spin parameter on the lower surface of the cylinder and the vorticity is sensitive to the spin parameter near separation region. As spin parameter increases the maximum heat coefficient and the thin thermal layer on front region are moved to direction of rotation. However, with balance between the local increase and decrease, the overal heat transfer coefficient is almost unaffected by rotation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.2006-2010
• /
• 2005

This study is concerned with the relation between steelbelt and belt edge separation. Belt edge separation causes tire burst and threatens passenger's safety. For that reason, it is important to predict durability caused by belt edge separation first in tire structure design step. In this study, to predict belt edge separation, we suggest the prediction method of belt edge separation and evaluate the effect of steelbelt width on the belt edge separation using FEM. We study on analysis parameter also to do exact estimation about the shear behaviour of belt edge area.

• Journal of Mechanical Science and Technology
• /
• 제16권11호
• /
• pp.1435-1439
• /
• 2002

This paper presents a form of the cohesive surface separation potential, which can produce potential curves by varying a single dimensionless parameter. Results show that a partial modification of Xu and Needleman's (1994) cohesive surface separation potential makes it possible to present the other potential corves as a special case as long as the normal separation is concerned. The proposed potential may describe interfacial debonding-crack initiation and growth-character of materials and, through numerical simulation, provide an insight for the effect of different cohesive surface separation potentials on the interfacial debonding.

• Bulletin of the Korean Chemical Society
• /
• 제16권9호
• /
• pp.873-885
• /
• 1995

The local structural and thermodynamical properties of blends A-B/H of a diblock copolymer A-B and a homopolymer H are studied using the polymer reference interaction site model (RISM) integral equation theory with the mean-spherical approximation closure. The random phase approximation (RPA)-like static scattering function is derived and the interaction parameter is obtained to investigate the phase transition behaviors in A-B/H blends effectively. The dependences of the microscopic interaction parameter and the macrophase-microphase separation on temperature, molecular weight, block composition and segment size ratio of the diblock copolymer, density, and concentration of the added homopolymer, are investigated numerically within the framework of Gaussian chain statistics. The numerical calculations of site-site interchain pair correlation functions are performed to see the local structures for the model blends. The calculated phase diagrams for A-B/H blends from the polymer RISM theory are compared with results by the RPA model and transmission electron microscopy (TEM). Our extended formal version shows the different feature from RPA in the microscopic phase separation behavior, but shows the consistency with TEM qualitatively. Scaling relationships of scattering peak, interaction parameter, and temperature at the microphase separation are obtained for the molecular weight of diblock copolymer. They are compared with the recent data by small-angle neutron scattering measurements.

• 한국정밀공학회지
• /
• 제16권7호
• /
• pp.178-187
• /
• 1999

In order to identify a transfer function model with noise, penalty function method has been widely used. In this method, estimation process for possible model parameters from low to higher order proceeds the model identification process. In this study, based on linear estimation method, a new approach unifying the estimation and the identification of ARMAX model is proposed. For the parameter estimation of a transfer function model with noise, linear estimation method by noise separation is suggested instead of nonlinear estimation method. The feasibility of the proposed model identification and estimation method is verified through simulations, namely by applying the method to time series model. In the case of time series model with noise, the proposed method successfully identifies the transfer function model with noise without going through model parameter identification process in advance. A new algorithm effectively achieving model identification and parameter estimation in unified frame has been proposed. This approach is different from the conventional method used for identification of ARMAX model which needs separate parameter estimation and model identification processes. The consistency and the accuracy of the proposed method has been verified through simulations.

• 한국항공우주학회지
• /
• 제47권9호
• /
• pp.617-628
• /
• 2019

벤트홀로 연결된 두 개의 가변 체적 챔버를 가지고 있는 파이로테크닉 분리 너트는 복잡한 과정을 통해 분리를 수행하므로 많은 설계 인자를 가지고 있다. 접촉부의 각도, 구성품의 질량, 누름봉 돌출부 안쪽 지름, 환형 챔버의 초기 부피, 확장 챔버의 초기 부피, 화약질량, 벤트홀 지름과 같은 설계 인자들의 변화에 따라 분리 너트의 성능이 어떻게 달라지는지를 파악하면 설계 개선 방향을 결정하는데 도움이 될 수 있다. 이에, 선행 연구를 통해 개발한 파이로테크닉 분리 너트 거동 예측 모델을 이용하여 매개변수 연구를 수행하였다. 다른 설계 인자의 값은 고정한 상태에서 한 설계인자의 값을 독립적으로 변화시키며 분리 시간이 어떻게 달라지는지, 변화의 원인이 무엇인지를 분석하였다.