• 한국정밀공학회지
• /
• 제24권3호
• /
• pp.140-146
• /
• 2007

To understand adhesive phenomena, we need to get force curve between two surfaces. And it is said that high stiffness force analysis system is needed to get precise force curve and more information of the surfaces. Usually the stiffness of the force measurement system is under the order of 10N/m. The stiffer force measurement system, however, results in more information on the surface, because higher stiffness lead to the wider range of force curves, secondly because the force curve obtained through the stiffer one describes more precise relationship between relative tip-sample separation and interaction force. In this paper, considering for stiffness and resolution, the cantilever was designed and we made adhesion force measurement apparatus with high stiffness and high resolution, so we measured adhesive force between Ag-ball and wafer.

• 항공우주기술
• /
• 제2권1호
• /
• pp.171-181
• /
• 2003

KSR-III의 탑재부를 보호하고 있는 nose fairing은 목표 고도에 도달하면 화약 폭발에 의한 분리 장치의 작용으로 탑재부가 주어진 임무를 수행할 수 있도록 로켓으로부터 떨어져 나가도록 설계되어 있다. 이때 분리된 fairing이 로켓에 부딪치지 않고 안전하게 분리될 수 있게 하기 위해서는 적절한 크기의 분리력이 가해져야 하며, 이러한 분리력의 결정에 있어서 공기의 영향이 거의 없는 고도도 조건을 가정하였다. 그러나 KSR-III의 설계가 진행됨에 따라 발사체의 임무에 수정이 가해졌으며, fairing의 분리도 고도고가 아닌 공력의 영향이 상당 부분 남아 있는 고도 45km에서 이루어질 것으로 예상됨으로써 이러한 새로운 조건에서도 충분히 안전한 분리를 이룰 수 있는 지의 여부에 대한 확인이 필요하게 되었다. 본 연구에서는 병렬형 부스터 분리 운동 해석을 위해 개발되었던 6자유도 운동방정식 해석 프로그램인 PASEM을 fairing 힌지를 모사할 수 있도록 수정을 가하여 fairing의 분리 운동을 예측하였다. 먼저 지상 시험 결과와의 비교를 통하여 힌지 운동 모사의 정확도를 검증하고 정확한 분리 조건을 설정하였다. 다음으로 고도 45km에서 받음각, 중력 작용 방향, 돌풍의 존재 여부 등을 바꾸어 가며 안전한 분리가 가능함을 판단하였으며, 힌지 이탈각을 60도에서 45도로 줄여줌으로써 훨씬 더 안전한 분리가 가능함을 확인하였다. 또한 발사 당일의 기상 조건의 변화에 따라 분리 고도가 40km로 낮추어져도 안전한 분리한 가능함을 알 수 있었다.

• 한국항행학회논문지
• /
• 제22권2호
• /
• pp.70-75
• /
• 2018

항공기에 장착하는 무장은 실제 항공기에 장착하기 전에 안전 분리가 이루어졌음을 검증하기 위해 지상에서 무장분리시험을 실시해야 한다. 본 연구에서는 더미유도탄으로 지상에서투하 안정성을 검증하기 위한 지상무장분리시험을 실시하였다. 지상무장분리시험의 필수장비인 무장분리장치는 공압으로 동작하며 압력이 크고, 오리피스 직경이 클수록 유도탄을 밀어내는 사출력이 크게 발생한다. 무장분리장치의 봄베 압력과 오리피스 직경을 변경하여 더미유도탄의 투하 움직임을 고속카메라로 계측하였고 투하변위, 투하속도를 분석하였다. 실제 비행하는 항공기에서 무장 투하 해석시 기초 데이터를 제공할 수 있고, 추후 개발되는 항공기 무장의 지상무장분리시험 수행시 유용할 것으로 생각한다.

• Journal of Mechanical Science and Technology
• /
• 제17권10호
• /
• pp.1485-1495
• /
• 2003

We investigate the triboelectrostatic separation of polyvinylchloride (PVC) from mixed plastics in the laboratory scale triboelectrostatic separation system. The flow and electric fields in the precipitator are obtained from the numerical solution of finite volume method. Using these flow and electric fields, we solved the particle motion equation considering the inertia, drag, gravity and electrostatic forces acted on the particles. The particle trajectories are obtained using a Lagrangian method as a function of different important variables such as Reynolds number, Stokes number, electrostatic force, electric charge and electric field distribution, inclined angle of plane electrodes, particle rebounding, particle charge decay rate after impact on the electrode surface, etc., in order to determine the optimal design conditions. The present predicted results for the cumulative yield represent well the experimental ones.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.322-325
• /
• 2005

The separation mechanism is installed to separate a note one by one from the stacked notes and the overlap type, one of separation mechanism, has been used a lot in financial equipments like ATM. This paper has compared and estimated analysis results using finite element method with experimental results over various parameters such as conditions of note, overlap value, roller shapes, which affect the friction force (resistance) exerting on notes between rollers. Consequently, the effect of various parameters on the performance of overlap type separation mechanism can be known and optimal shape and overlap value can be obtained.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권3호
• /
• pp.19-23
• /
• 2022

We have been developing a magnetic separation device that can be used in low magnetic fields for paramagnetic materials. Magnetic separation of paramagnetic particles with a small particle size is desired for volume reduction of contaminated soil in Fukushima or separation of iron scale from water supply system in power plants. However, the implementation of the system has been difficult due to the needed magnetic fields is high for paramagnetic materials. This is because there was a problem in installing such a magnet in the site. Therefore, we have developed a magnetic separation system that combines a selection tube and magnetic separation that can separate small sized paramagnetic particles in a low magnetic field. The selection tube is a technique for classifying the suspended particles by utilizing the phenomenon that the suspended particles come to rest when the gravity acting on the particles and the drag force are balanced when the suspension is flowed upward. In the balanced condition, they can be captured with even small magnetic forces. In this study, we calculated the particle size of paramagnetic particles trapped in a selection tube in a high gradient magnetic field. As a result, the combination of the selection tube and HGMS (High Gradient Magnetic Separation-system) can separate small sized paramagnetic particles under low magnetic field with high efficiency, and this paper shows its potential application.

• Tribology and Lubricants
• /
• 제26권2호
• /
• pp.136-141
• /
• 2010

In an oil hydraulic vane pump for an automobile, it is very important that the vane doesn't separate from the camring inner race during the operation of the vane pump. The vane generally has not only the oil hydraulic force acting on the bottom face to contact to camring inner race but there is also an inertial force and viscous force. Because the oil hydraulic force is much larger than the other forces, the contact state between the vane tip and the camring inner race is sufficient. However, the contact state between the vane tip and the camring inner race is only affected by the inertial and viscous forces during the delivery of the vane pump, because the oil hydraulic force acting on the vane is in equilibrium. If the inertial force is larger than the viscous force, which happens when the vane is separated from the camring inner race, the delivery of the vane pump can become unstable or the volume efficiency can become decrease rapidly. Therefore, in this paper, the state of the contact between the vane and the camring is considered. The results show that the rotating speed of the shaft, the operating temperature of the oil, the clearance between the vane and the rotor, and the mass of the vane exert a great influence on the state of the contact between the vane and the camring.

• 대한수의학회지
• /
• 제29권2호
• /
• pp.33-39
• /
• 1989

Pure separation of various leukocytes is required for the assessment of their roles in immunological and phisiological function. In this study, pure separation of monocytes from canine peripheral blood was attempted. At first, mononuclear cells (PBMC) were separated by ficoll-hypaque gradient method and then monocytes were recovered from PBMC suspensions in sucrose gradient Sol. (PBMC-Sucrose), autologous plasma (PBMC-Plasma) and autologous serum (PBMC-Serum) incubated at $37^{\circ}C$ for 2 hours. 1. In the separation of PBMC by ficoll-hypaque gradient method in canine blood, higher relative centrifugal force (RCF) was required, as high as more than 1,300xg RCF for 40 minutes, for clear formation of PBMC layer than that in human blood as usually used 400xg RCF for 40 minutes. 2. In monocytes-separation from three PBMC suspensions following PBMC separation, recovery-, purity- and viability-rate of monocytes showed better results in PBMC-Plasma and PBMC-Serum than in PBMC-Sucrose suspension, particulary showing better results from PBMC suspensions performed by centrifugation at 1,500xg RCF for 40 minutes.

• 한국항공운항학회지
• /
• 제19권3호
• /
• pp.10-15
• /
• 2011

위성용 분리장치는 작동 전까지는 높은 체결력으로 위성의 부속물들을 안정된 체결 상태로 유지해야 한다. 작동 후에는 위성시스템에 손상이 없이 위성본체로부터 분리되어 태양전지판과 안테나와 같은 부속장치의 전개를 성공적으로 수행하여야 한다. 따라서 본 논문에서는 분리충격이 작고 취급이 용이하며 재장착이 가능한 형상기억합금구동기와 태엽스프링을 이용한 소형위성용 비폭발식 분리장치를 제안하였다. 성능을 검증하기 위하여 분리시간, 분리가 가능한 사전하중, 분리장치 작동 시 충격량 측정 실험을 수행하였다.

• 대한기계학회논문집B
• /
• 제32권11호
• /
• pp.824-831
• /
• 2008

We present a continuous size-dependent particle separator using a negative dielectrophoretic (DEP) virtual pillar array. Two major problems in the previous size-dependent particle separators include the particle clogging in the mechanical sieving structures and the fixed range of separable particle sizes. The present particle separator uses the virtual pillar array generated by negative DEP force instead of the mechanical pillar array, thus eliminating the clogging problems. It is also possible to adjust the size of separable particles since the size of virtual pillars is a function of a particle diameter and applied voltage. At an applied voltage of 500 kHz $10\;V_{rms}$ (root mean sqaure voltage) sinusidal wave and a flow rate of $0.40\;{\mu}l\;min^{-1}$, we separate $5.7\;{\mu}m$-, $8.0\;{\mu}m$-, $10.5\;{\mu}m$-, and $11.9\;{\mu}m$-diameter polystyrene (PS) beads with separation purity of 95%, 92%, 50%, and 63%, respectively. The $10.5\;{\mu}m$- and $11.9\;{\mu}m$-diameter PS beads have relatively low separation purity of 50% and 63%. However, at an applied voltage of $8\;V_{rms}$, we separate $11.9\;{\mu}m$-diameter PS beads with separation purity over 99%. Therefore, the present particle separator achieves clog-free size-dependent particle separation, which is capable of size tuning of separable particles.