• Geosystem Engineering
• /
• 제21권5호
• /
• pp.262-272
• /
• 2018

The U-statistic method is one of the most important structural methods to separate the anomaly from background. It considers the location of samples and carries out the statistical analysis of the data without judging from a geochemical point of view and tries to separate subpopulations and determine anomalous areas. In the present study, 3D U-statistic method has been applied for the first time through the three-dimensional (3D) modeling of an ore deposit. In order to achieve this purpose, 3D U-statistic is applied on the data (Fe grade) resulted from the drilling network in Baghak mine, central part of the Sangan iron mines (in Khorassan Razavi Province, Iran). Afterward, results from applying 3D U-statistic method are used for 3D modeling of the iron mineralization. Results show that the anomalous values are well separated from background so that the determined samples as anomalous are not dispersed and according to their positioning, denser areas of anomalous samples could be considered as anomaly areas. And also, final results (3D model of iron mineralization) show that output model using this method is compatible with designed model for mining operation. Moreover, seen that U-statistic method in addition for separating anomaly from background, could be very efficient for the 3D modeling of different ore type.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.268-273
• /
• 2001

A fundamental study on the harvest-type ice storage system applied ice making method in-water and its temperature characteristics in ice storage system was performed experimentally of the charge and discharge of cold. This paper is concerned with the development of a new method for making and separating ice and saving floated ice by installing an evaporation plate at in-water within a storage tank. In a conventional harvest-type ice storage system, a tank saves ice by separating a formed ice from an installed evaporation plate, which is located above an ice storage tank as an ice storage system. A new harvest-type method shows very good heat transfer efficiency than a convectional method. It is because the evaporation panel is directly contacted with water in a storage tank. Also, at a conventional system a circulating pump, a circulating water distributor and a piping are installed, but these components are not necessary in a new method. In this study two kinds of ice storage systems are experimentally investigated to study the thermal characteristics of ice storage tanks.

• 대한기계학회논문집A
• /
• 제20권11호
• /
• pp.3454-3462
• /
• 1996

Compared to a full three dimensional FEM, the Slab-FEM hybrid method reduces the required computation time distinctly and it can be applied to the analysis of a shape rolling process. However, the method is somewhat approximate and predictions by the method contain certain inaccuracies. In the present investigation a parameter called T-factor was introduced to compensate the inaccuracies of the method and proper values of the parameter were estimated for different widths of bars and reduction ratios. Then, the method was applied to analyze cold and hot rollings of rectangular bars and predicted results were compared to those of experiments. Nonuniform distributions of temperature in the bars were predicted by utilizing the temperature equation obtained for a semi-infinite solid under radiation and convection boundary conditions. It was found out that accuracies of spread and roll separating force predictions could be enhanced by using proper values of the T-factor.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.965-980
• /
• 2014

This paper presents a new estimation method of full scale propulsive performance for the pulling type podded propeller. In order to estimate the drag of pod housing, a drag velocity ratio, which includes the effects of podded propeller loading and Reynolds number, is presented and evaluated through the comparison of model test and numerical analysis. By separating the thrust of propeller blade and the drag of pod housing, extrapolation method of pod housing drag to full scale is deduced, and correction method of propeller blade thrust and torque to full scale is presented. This study utilized the drag coefficient ratio of the pod housing as a measure for expanding it to full scale, but in order to increase the accuracy of performance evaluation, additional study is necessary on the method for the full scale expansion via separating the drag of pod body, strut and fin which consist the pod housing.

• 설비공학논문집
• /
• 제14권1호
• /
• pp.31-37
• /
• 2002

This paper is concerned with the development of a new method for making and separating ice and saving floated ice by installing an evaporation plate at in-water within a storage tank. In a conventional harvest-type ice storage system, a tank saves ice by separating a formed ice from an installed evaporation plate, which is located above an ice storage tank as an ice storage system. A new harvest-type method shows very good heat transfer efficiency than a convectional method. It is because the evaporation panel is directly contacted with water in a storage tank. Also, at a conventional system a circulating pump, a circulating water distributor and a piping are installed, but these components are not necessary in a new method. In this study two kinds of ice storage systems are experimentally investigated to study the thermal characteristics of ice storage tanks. The results showed discharge of cold capacity of new type indicated the high values about 30~40% based on five time of drive, the temperature difference of inlet/outlet occurred the big range about $1.3^{\circ}C$. So, the new type which makes ice in water showed superiorly.

• 한국컴퓨터정보학회논문지
• /
• 제15권10호
• /
• pp.49-57
• /
• 2010

본 논문에서는 웨이브릿 변환을 이용한문자인식 방법 중 문자의 최소 단위인자음과 모음을 분리시켜 문자의 모멘트를 분석하여 산출되는 정보를 사전에 컴퓨터에 입력시켜 문서화된 수기 문자를 컴퓨터에 저장하고 인식시키는 방법에 접근 하였다. 연구는 획득한 문장 이미지에서 잡음을 없애고 줄 단위로 분리, 분리된 줄 단위 문장은 한 문자 단위로 다시 분리된 후 자음과 모음으로 분리 하였다. 분리된 자소는 CVIPtools를 사용하여 히스토그램 평활화와 침식 및 평균값 필터를 처리한 후 C++를 이용하여 세선화 처리하고 세선화된 자소는 팽창 및 크기 변환하여 모든 자소가 동일 굵기, 크기 이미지로 만들었다. 표준화 이미지는 이진화 이미지로 변환하여 3단계 웨이브릿 변환을 이용하여 데이터의 양을 1/64로 줄인 후 해밍거리를 조사하였다. 연구 결과 다양한 'ㄱ'상호간 및 'ㅅ'상호간의 일치도는 매우 높게 나타났고, 서로 상이한 'ㄱ'과 'ㅅ'을 비교 했을 때 상호간 일치도가 매우 낮게 나옴을 알 수 있었다. 이 연구 결과로 더 많은 수기 자소들에 대한 해밍거리조사가 이루어지면 각각의 자음과 모음의 모멘트 구분하여 수기 문자 인식에 중요한 정보를 알 수 있을 것으로 판단된다.

• 인터넷정보학회논문지
• /
• 제20권3호
• /
• pp.33-41
• /
• 2019

본 논문에서는 실내 공간 이미지의 의미론적 영상 분할을 위해 배경과 물체로 재설계된 클래스를 학습하는 방법을 제안한다. 의미론적 영상 분할은 이미지의 벽이나 침대 등 의미를 갖는 부분들을 픽셀 단위로 나누는 기술이다. 기존 의미론적 영상 분할에 대한 연구들은 신경망을 통해 이미지의 다양한 객체 클래스들을 학습하는 방법들을 제시해왔고, 긴 학습 시간에 비해 정확도가 부족하다는 문제가 지적되었다. 그러나 물체와 배경을 분리하는 문제에서는, 다양한 객체 클래스를 학습할 필요가 없다. 따라서 우리는 이 문제에 집중해, 클래스를 단순화 후에 학습하는 방법을 제안한다. 학습 방법의 실험 결과로 기존 방법들보다 정확도가 약 5~12% 정도 높았다. 그리고 같은 환경에서 클래스를 달리 구성했을 때 학습 시간이 약 14 ~ 60분 정도 단축됐으며, 이에 따라 물체와 배경을 분리하는 문제에 대해 제안하는 방법이 효율적임을 보인다.

• 멤브레인
• /
• 제8권2호
• /
• pp.69-76
• /
• 1998

막분리기술은 다른 분리기술에 비해 에너지절약형이며 또 비교적 대량으로 분리를 수행할 수 있다는 장점이 있어 근래 산업 현장에서 많이 이용되고 있다. 특히 mass separating agent를 사용하지 않고, 상변화를 수반하지 않는 순조건에서 실시할 수 있다는 특성으로 인하여 생물물질의 생산 및 회수에 있어서 막분리의 사용이 크게 증가하고 있다. 근래에 들어 막의 재지라 분리 module의 개발 등에 의해 fouling, 농도분극현상 등, 막분리의 근본적 문제점들이 많이 해결되고 있을 뿐 아니라, 기존의 조분리의 영역을 넘어서 정밀분리에로의 발전이 가시화되고 있다. 또한 생물분리기술의 추세인 복합분리와 동시분리의 측면에 있어서도 막분리의 응용성은 우수하여, 향후 생물공학 제품의 생산에 있어 막분리 기술의 역할은 막대할 것으로 사료된다.

• Fibers and Polymers
• /
• 제7권2호
• /
• pp.191-194
• /
• 2006

This paper adopts nonlinear vibration method to analyze the fluctuation process of fiber movement. Based on Hamilton Principle, this paper establishes differential equation of fiber axial direction movement. Using variable-separating method, this paper separates time variable from space variable. By using the disperse movement equation of Galerkin method, this paper also discusses stable region of transition curve and points out those influencing factor and variation trend of fiber vibration.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2007년도 추계학술대회 및 정기총회
• /
• pp.469-473
• /
• 2007

For the quantitative analysis of inclusion using OES data, separating of noise and inclusion is needed. In previous methods assuming that noises come from a normal distribution, intensity levels beyond a specific threshold are determined as inclusions. However, it is not possible to classify inclusions in low intensity region using this method, even though every inclusion is an element of some chemical compound. In this paper, we assume that distribution of OES data is a Gaussian mixture and estimate the parameters of the mixture model using EM algorithm. Then, we calculate mixing ratio of noise and inclusion using these parameters to separate noise and inclusion.