• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.304-308
• /
• 2000

Surface roughness measurement system with capacitance type gap sensor. Tentative result from the calibration measurement showed the potential applicability of the sensor to the processed specimen. In order to test the sensitivity of the measurement system, several parameters including valley depth, width of the specimen have been changed. Effect of the charge area between sensor and specimen surface has been also analyzed.

• 센서학회지
• /
• 제23권6호
• /
• pp.402-408
• /
• 2014

Heart rate is one of the most important signal to monitor the health condition of the patient or exerciser. Various wearable devices have been developed for the continuous monitoring of ECG signal from human body during exercise. Among these, ECG chest belt has been widely used. However wearing chest belt with ECG sensor is uncomfortable in normal life due to the electrode contact between metal electrodes of ECG sensor and skin of the human body. So we develop the royal healthcare backpack that can measure ECG signal without skin contact by using capacitor-type ECG sensor. The position of the measurement point is critical to collect a clear ECG signal in the capacitive ECG measurement from backpack. Various tests were conducted to find the optimal ECG measurement position which has less noise and could get strong and clear ECG signal during exercise, walking, hiking, mountain climbing and cycling.

• 센서학회지
• /
• 제21권2호
• /
• pp.121-126
• /
• 2012

Piezoresistive type contact force sensor array is fabricated by (111) Silicon bulk micromachining for continuous blood pressure monitoring. Length and width of the unit sensor structure is $200{\mu}m$ and $190{\mu}m$, respectively. The gap between sensing elements is only $10{\mu}m$. To achieve wafer level packaging, the sensor structure is capped by PDMS soft cap using wafer molding and bonding process with $10{\mu}m$ alignment precision. The resistance change over contact force was measured to verify the feasibility of the proposed sensor scheme. The maximum measurement range and resolution is 900 mm Hg and 0.57 mm Hg, respectively.

• 센서학회지
• /
• 제14권3호
• /
• pp.169-179
• /
• 2005

A multiplexed bend loss type single-mode fiber-optic sensor system was prepared to measure the displacement of several cm of the civil engineering structures such as many bridges, tunnels and various buildings. This bend loss type fiber-optic sensor used the signal difference between two reflection signals due to various bend losses generating at a pair of optical connectors by using OTDR (optical time domain reflectometer) for measuring displacements. And the experiments were conducted for showing the measurement feasibility on the range of 10 cm, and the multiplexing experiments were also performed to measure the displacements of 5 measuring positions of an object by setting these 5 fiber-optic sensors on a single mode fiber simultaneously.

• 센서학회지
• /
• 제10권1호
• /
• pp.9-15
• /
• 2001

외인성 패브리-페롯 간섭계(EFPI) 광섬유 센서는 민감도와 분해능이 우수하며, 다른 종류의 광섬유 센서에 비해 많은 장점을 가지고 있다. 하지만 EFPI 광섬유 센서는 단지 프린지 개수만을 계산하여 측정량을 얻기 때문에 측정 방향을 구별하기 어렵다. 본 논문에서는 측정방향의 구분을 위한 추가적인 기능과 기존의 EFPI 광섬유 센서와는 다른 측정 시스템을 갖는 투과형 외인성 패브리-페롯 간섭계(TEFPI) 광섬유 센서를 개발하였다. 그리고 이를 이용하여 변형률 및 온도를 측정하였다.

• 한국토양비료학회지
• /
• 제31권2호
• /
• pp.85-94
• /
• 1998

물의 높은 유전율을 이용하여 토양 수분함량을 검정하고저 피복 절연 철봉을 토양에 박아 두 극으로 하는 토양 매질 콘덴서에 RC발진회로를 적용하여 주기를 조사하거나 또는 10 mega Herz Pulse 투여시 최대 저장(貯藏) 전압을 검정하는 방식으로 수분 변화에 따른 토양의 유전율을 조사하였다. 주기식 쎈서에선 토양 콘덴서의 용량이 영점 조정후 표준 콘덴서에 비교된 백분율로 출력되었는데 쎈서봉을 물에 담근 깊이와 선형적 관계에 있었다. 여러 개의 쎈서를 가까운 거리에 설치하면 쎈서봉이 안테나 역할을 하여 RC 발진에 교란이 있었으며 변온에 따른 출력 보정 함수를 제시했다. 토양 수분 함량과 출력사이에 높은 상관성이 있으나 쎈서 붕이 설치된 깊이 및 방향에 따라 출력반응이 변화하므로 사용자가 설치후 출력을 토양수분으로 변환하는 함수를 구하여야 한다. 전압식 쎈서에선 출력이 토양수분 함량과 역함수적 관계에 있어 토양 수분 정밀 계측용으론 적합치 않으나 구성 부품이 적고 노화가 느리어 토양 수분의 간이 검정에 적합하고 출력 전압에 따라 relay를 개폐하되 개폐 전압을 사용자가 설정할 수 있는 회로를 첨부하여 수위 조절 또는 토양수분에 따른 관개 line개폐에 활용한 결과 재현성이 우수하였다.

• 한국소음진동공학회논문집
• /
• 제23권12호
• /
• pp.1082-1089
• /
• 2013

3-Axis sensor measurement system is needed for measuring ride quality of elevator. But because 3-Axis piezoelectric accelerometer is expensive. We developed 3-Axis sensor system which is suitable for measuring ride quality of elevator using cheap MEMS sensor. There are two types of MEMS sensor that are piezoresistive and capacitive type. The excellence of piezoresistive type in characteristic of frequency response and noise is confirmed compare to capacitive type as a result of this paper's experiment and reference. 3-Axis system using MEMS sensor needs MEMS's proper frequency response characteristic. Additionally noise characteristic of sensor and circuit, stiffness of assembly are needed for deciding frequency range and accuracy of amplitude.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권2호
• /
• pp.147-152
• /
• 1999

Semiconductor piezoresistive type vibration sensor was fabricated by using semiconductor process and micromachining technology. To measure the micro electromagnetic force between coil and magnet, fabricated vibration sensor was used. Toapply micro electromagnetic force produced from the micro exciter, small-sized NdFeB permanent magnet was attached on the mass of the fabricated vibration sensor. The measured electromagnetic force are about 5~180dyne when the applied sinusoidal current of 1KHz in the range of 1.5~8mA. The measurement of micro electromagnetic forcewas performed by changing the distance between coil and magnet. Output characteristics of micro electromagnetic force according to the applied coil current were linear. Furthermore, output results were used to get the transfer constant that is important to decide the efficiency and the performance of the coil and magnet.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권2호
• /
• pp.83-90
• /
• 2004

This paper describes investigations of the UHF(Ultra High Frequency) PD(Partial Discharge) measuring technology designed for monitoring of PD in high power apparatus. Based on the spiral antenna theory, the hole type sensor for GIS with metal flange spacer and injection type sensor for oil filled transformer are developed. The experimental results show measurement characteristics of the PD sensor for several artificial defects in gas-insulated system(GIS) and oil transformer. Moreover, we proposed the new $\phi$-f-q method for the purpose of condition assessment of high power apparatus.

• 한국공간구조학회논문집
• /
• 제17권1호
• /
• pp.93-100
• /
• 2017

With increasing number construction of high-rise building which has about 40 to 60 floors there have been many kinds of problem which related with usage from vibration. To predict response acceleration, it is important to assess correct natural frequency. However, due to the noise of MEMS sensor, it is difficult to measure dynamic characteristic such as natural frequency when measuring ambient vibration using MEMS sensor within cell phone. Therefore, a comparative analysis on vibration measuring applications was performed after measuring ambient vibration of 2 skyscrappers which have height between 133.5~244.3m that are located in Seoul and Observation tower using I-jishin APP with noise reduction function of MEMS sensor in order to verify the effectiveness of low noise type vibration measurement APP.