• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.331-336
• /
• 1999

The optical sensors of Electro-Optical Camera (EOC) and Ocean Scanning Multi-spectral Imager (OSMI) aboard the Korea Multi-Purpose SATellite (KOMPSAT) will be placed in a sun synchronous orbit in 1999. The EOC and OSMI sensors are expected to produce the land mapping imagery of Korean territory and the ocean color imagery of world oceans, respectively. Utilization of the EOC and OSMI data would encompass the various fields of science and technology such as land mapping, land use and development, flood monitoring, biological oceanography, fishery, and environmental monitoring. Readiness of data support for user community is thus essential to the success of the KOMPSAT program. As part of testing such readiness prior to the KOMPSAT launch, we have performed the preliminary acceptance test for the KOMPSAT data processing system using the simulated EOC and OSMI data sets. The purpose of this paper is to demonstrate the readiness of the KOMPSAT data processing system, and to help data users understand how the KOMPSAT EOC and OSMI data are processed and archived. Test results demonstrate that all requirements described in the data processing specification have been met, and that the image integrity is maintained for all products. It is however noted that since the product accuracy is limited by the simulated sensor data, any quantitative assessment of image products can not be made until actual KOMPSAT images will be acquired.

• 센서학회지
• /
• 제15권5호
• /
• pp.303-308
• /
• 2006

Aggregation-induced emissions of polymetalloles have been investigated since they are very attractive in their possible optoelectronic applications such as P-LED's and Sensors. Size of nanoparticulates was measured by using scanning electron micrograph and was about 200-300 nm. Phenylmethylpolysilane (PMPS) and polymetalloles emit the light at 360 nm and 520 nm, respectively. However, the aggregates of polymetallole containing PMPS exhibit an enhanced emission band at 520 nm, indicating that the energy transfer occurs from PMPS to polymetalloles in aggregates. Emission intensity of PMPS/polymetallole nanoparticulates at 520 nm increases depending on the aliquot of PMPS.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.13-13
• /
• 2010

Piezoelectric sensors are extensively used to measure force because of their high sensitivity and low cost. however, the development of device with reduced size but with improved sensitivity is highly important. Low-temperature co-fired ceramic (LTCC) is one of promising materials for this application than a silicon substrate because it has very good electrical and mechanical properties as well as possibility of making various three dimensional (3D) structures. In this work, piezoelectric pressure sensors based on hybrid LTCC technology were presented. The LTCC diaphragms with thickness of $400\;{\mu}m$ were fabricated by laminating 12 green tapes which consist of alumina and glass particle in an organic binder. The piezoelectric sensing layer consists of PZT thin film deposited by RF magnetron sputtering method on between top and bottom Au electrodes. The PZT films deposited on LTCC diaphragms were successfully grown and were analyzed by using X-ray diffraction method (XRD) and field emission scanning electron microscope (FESEM).

• 열처리공학회지
• /
• 제5권3호
• /
• pp.149-156
• /
• 1992

Transformation behavior and reversible shape memory effct of Ti-Ni-Cu alloys with various Cu content has been investigated by means of electrical resistivity measurement, differential scanning calorimetry. X-ray diffraction and strain gage sensor. The transformation sequence in Ti-Ni-Cu alloys substituted by Cu for Ni up to 5at.% occurs to $B2{\leftrightarrow}B19^{\prime}$ and it proceeds in two stages by addition of 10 at.%Cu. i.e. $B2{\leftrightarrow}B19{\leftrightarrow}B19^{\prime}$. But the content of Cu increases up to 20at.%, it has been transformed in one stage ; $B2{\leftrightarrow}B19$. The shape change of Ti-40Ni-10Cu alloy which was constrain aged in circular form bended in $B2{\leftrightarrow}B19$ transformation but it spreaded out in $B19{\leftrightarrow}B19^{\prime}$ transformation. The amount of reversible shape change (${\Delta}{\varepsilon}$) of Ti-47Ni-3Cu alloy constrain aged at $400^{\circ}C$ after solution treatment has a maximum value of about $5.6{\times}10^{-3}$, but that of cold rolled and constrain aged specimens exhibits a little value independent of Cu concentrations.

• 센서학회지
• /
• 제27권4호
• /
• pp.249-253
• /
• 2018

Infrared transparent ZnS ceramics were synthesized through hydrothermal synthesis ($180^{\circ}C$, 70 h) and sintered using a hot press process at $750^{\circ}C-1000^{\circ}C$. We carried out x-ray diffraction, scanning electron microscopy, and Fourier transform-infrared spectroscopy to confirm the optical properties of the ZnS ceramics after sintering at various temperatures. The phase of ZnS nanopowders was a single phase (cubic) without the hexagonal phase. However, as sintering temperature increased, the formation and increment of hexagonal structures was confirmed. The ZnS ceramic sintered at a temperature of $750^{\circ}C$ showed poor transmittance because it was not completely sintered and because of the pore effect. The ZnS ceramic with the highest transmittance (approximately 69%) was sintered at $800^{\circ}C$. As sintering temperature increased, transmittance gradually decreased owing to the increase in the formation of the hexagonal phase.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.315.2-315.2
• /
• 2014

Pt-functionalized ZnS nanowires were synthesized on Au-deposited c-plane sapphire substrates by thermal evaporation of ZnS powders followed by wet Pt coating and annealing. The $NO_2$ gas sensing properties of multiple-networked Pt-functionalized ZnS nanowire sensors were examined. Scanning electron microscopy showed the nanowires with diameters of 20-80 nm. Transmission electron microscopy and X-ray diffraction showed that the nanowires were wurtzite-structured ZnS single crystals. The Pt-functionalized ZnS nanowire sensors showed enhanced sensing performance to $NO_2$ gas at $150^{\circ}C$ compared to pristine ZnS nanowire sensors. Pristine and Pt-functionalized ZnS nanowire sensors showed responses of 140-211% and 207-488%, respectively, to 1-5 ppm $NO_2$, which are better than or comparable to those of many oxide semiconductor sensors. In addition, the underlying mechanism of the enhancement of the sensing properties of ZnS nanowires by Pt functionalization is discussed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.189.1-189.1
• /
• 2014

Lead zirconium titanate (PZT) is usually used as bulk and thin films. Due to high flexibility and piezoelectric, ferroelectric and pyroelectric properties, PZT fiber has attracted in a variety of fields such as sensor devices, non-electromechanical systems and non-volatile ferroelectric memory devices. And PZT fiber can be numerously synthesized and almost with the diameter of PZT fiber thicker than $10{\mu}m$. However, the electrospinnig method is cost effective and convenient. PZT obtained by electrospinning methodhas the diameter from sub-micro to nanometer. In this paper, the PZT/PVP nanofibers were synthesized with three precursors, lead nitrate, zirconium ethoxide and titanium isopropoxide. And the PZT nanofibers were fabricated after removal of PVP by annealing process at various temperature. The obtained PZT nanofibers were characterized by means of X-ray photoelectron spectroscopy (XPS) for chemical properties, X-ray diffraction (XRD) for crystallinity and phase, scanning electron microscopy (SEM) for morphologies. The diameter of PZT nanofibers were measured with SEM. From the SEM images, we confirmed that diameter of PZT nanofibers was hundreds of nanometers and decreased with increasing the annealing temperature. When the annealing temperature increased, the crystallinity of PZT nanofibers changed from pyrochlore to perovskite structure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.2000-2002
• /
• 2002

신장병의 조기진단을 위해서 체내의 요소 농도의 정확한 측정은 매우 중요하며, 이러한 이유에서 많은 연구자들은 보다 빠르고 정확한 체내의 요소농도 측정을 위한 바이오센서를 개발 중이다. 본 논문은 반도체 공정을 이용하여 산화막(4.000${\AA}$)이 성장된 p-형 실리콘 웨이퍼를 사용하였다. RF sputter를 사용하여 티타늄과 백금을 증착한 백금 박막전극을 제작하였다. 그 위에 전도성 고분자인 Polypyrrole(PPy)과 전도도를 증가시키기 위하여 구리를 도펀트로 사용 scan rate 40mV/S $0.8{\sim}-0.8V$ 전위영역에서 산화적 전기 중합법 (anodical electropolymerization)을 이용하여 전극을 형성하였다. 요소를 2개의 암모늄 이온과 1개의 탄산 이온으로의 가수분해반응을 촉매하는 효소로써 유레이즈(urease)를 전기적 흡착방법을 이용하여 고정화하고 이에 요소농도의 변화에 대하여 시간대 전류법 (chronoamperometry:CA)을 사용하여 감도를 측정하였다. 최적화된 조건하에서 요소농도에 비례하여 Cu-doped PPy electrode로부터 얻어진 확산한계전류는 $4.5{\mu}A$/decade의 기울기를 나타내었다. 전극의 표면은 SEM(Scanning Electron Microscopy)과 EDX(Energy Dispersive X-Ray Spectrometer)를 이용하여 분석 하였다.

• 센서학회지
• /
• 제9권6호
• /
• pp.455-460
• /
• 2000

질산 아연, $Zn(NO_3)_2$, 수용액 속에서 전착에 의해 ITO 유리기판에 ZnO 박막을 성장하였다. 성장 매개 변수로 용액농도, 성장온도, 및 전착 전위를 선택하였으며, 성장된 박막은 SEM사진과 XRD 및 광흡수 계수 측정을 통해 연구되었다. 성장된 ZnO 박막은 육방정계 wurtzite 구조를 가지며, 질산아연 수용액농도가 0.1mol/liter, 성장온도 $60^{\circ}C$ 및 Ag/AgCl 기준전극에 대한 전위 -0.7V인 조건에서 양질의 ZnO 박막이 성장되었다.

• 센서학회지
• /
• 제26권5호
• /
• pp.360-365
• /
• 2017

In this study, a heat treatment process was applied to ZnS nano-powder to improve the optical properties of ZnS ceramic, and the characteristics of heat treatment time were studied. The ZnS nano-powders were synthesized by hydrothermal synthesis. The heat treatment was carried out at $550^{\circ}C$ for 0.5, 1, 2, and 4 hours in a vacuum atmosphere ($10^{-2}torr$). X-ray diffraction and scanning electron microscope analyzes confirmed the change of crystal phase and grain size to confirm the structural change with heat treatment time. The heat treated ZnS nano-powder was sintered by hot pressing, and the change of optical properties of the ZnS ceramic was analyzed by infrared spectroscopy.