• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.209-213
• /
• 2010

This paper is a study of Car safety network system using sensed data from varied sensors. This hardware will work with various sensors and communication protocols. There are many sensors. Then, I selected 3 sensors for test, which were sonic sensor for distance checking, tilt sensor for rollover and impact sensor for car accident and theft. Also, there are many interfaces for sensor. Therefore I designed hardware to support various sensor interfaces. For instance ADC(Analog to Digital converter), I2C, RS232, RS485, CAN. In this case, sonic sensor have I2C interface, tilt sensor have RS485 interface and Impact sensor have analog interface. In this research, I can gather sensing data from 3 sensors (mentioned above), and sending control signal to other processor with RS232, RS485, CAN communication. So, we can use easily this hardware for many cases of systems, which need sensors.

• Korean Journal of Remote Sensing
• /
• v.36 no.4
• /
• pp.645-652
• /
• 2020

GK2A(GEO-KOMPSAT-2A)satellite has been operating excellently since its launch in Dec 2018. The secondary payload called KSEM (Korean Space Environment Monitor) was equipped into the GK2A satellite along with AMI (Advanced Meteorological Imager) sensor. KSEM is the Korea's first operational geostationary space weather sensor and has been developed collaboratively by KHU (Kyung Hee University) and KARI (Korea Aerospace Research Institute). The interface works between KSEM and GK2A were conducted by KARI. Various interface tests, which aim for evaluating effective functionality of KSEM with the spacecraft, were intensively conducted at KARI facilities. Main tests consisted of mechanical and electrical check-up activities between the KSEM and GK2A. Interface tests of KSEM, which involve pre-launch tests such as ETB and GK2A system level tests, were conducted to evaluate functional and performance of KSEM before the launch. The tests carried out during the GK2A LEOP (Launch and Early Orbit Phase) and IOT (In Orbit Test) period (Dec 2018 ~ June 2019) showed excellent in-orbit performance of KSEM data.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.1
• /
• pp.51-57
• /
• 1999

This thesis is written about the Wired Logic Type Unit in developing equipment that the load is driven, that the interface unit connect with 1 Scan time to PO30 of operated PLC output contact with that a sensing signal of Temperature Sensor RSD Pt $100\Omega$ let generate the relay output of temperature controller and input the PLC. The PLC Test Kit in country that the PLC to be programmed at the PLC education place is able to drive the load, is done to do a education of PLC on status that interface process between PLC and load are disregarded. As Developing Kit for supplement this point, when the relay output of temperature controller to use Pt 100 of temperature sensor as mentioned on the former among every kinds of sensor feed back to the input of the PLC, as the equipment to act with real time system that the output contact of PLC operated to insert the WLTIJ among PC, PLC and the load, it can understand and see very easy the main principle of PLC use. The structure of WLTU to be a interface unit of load separated as to the point of contact and noncontact, sensor, indicating lamp and A contact and B contact that is belong to driving part, and a motor is belong to loading part.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.6
• /
• pp.19-24
• /
• 2012

In this paper we introduce a commercial interactive whiteboard (IWB) system named ImSensorTouch by ImSensor Inc. Using this interface system, we can control our computer through the interactive whiteboard screen just by touching it with your finger or a pen. The interface interacts with Windows operating system (OS) and is adaptable to changes of surroundings especially temperature, and illumination condition. The proposed system calculates the difference between a reference image and a current image captured by a camera in the optical receptive field. And the position making the difference is used to generate the position on Windows screen. Then, we send a mouse event on the position to Windows OS. We have implemented the system using a critical section(CS) with two threads for the reference frame update process in which an adaptive thresholding technique is periodically exploited to get reliable result. We expect the system is competitive and promises a bright future in the IWB market.

• Journal of Sensor Science and Technology
• /
• v.3 no.1
• /
• pp.54-60
• /
• 1994

In this paper, the multi-sensor signal processing IC is designed. It consists of an analog multiplexer for selection of multi-sensor signals, active filters for noise rejection and signal amplification, and a sample and hold circuit for interface with digital signal processing. By implementing these circuits with CMOS transistors, integration, low power dissipation and miniaturization of the total signal processing system have been made possible.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1067-1070
• /
• 2003

In this paper, we present a remote measurement system for the wireless monitoring of ECU Sensor Signals of vehicle. In order to measure the ECU sensor signals, the interface circuit is designed to communicate ECU and designed terminal wirelessly according to the ISO, SAE regulation of communication protocol standard. A micro-controller 80C196KC is used for communicating ECU sensor signals. ECU sensor signals are transmitted to the RF-wireless terminal that was developed using the micro controller 80386EX. LCD, and RF-module. 80386EX software is programmed to monitor the ECU sensor signals using the Borland C++ compiler in which the half duplex method was used for the RS232 communication. The algorithms for measuring the ECU sensor signals are verified to monitor ECU state. At the same time, the information to fix the vehicle's problem can be shown on the developed monitoring software. The possibility for remote measurement of ECU sensor signals using 80386EX is also verified through the developed systems and algorithms.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.1
• /
• pp.183-192
• /
• 2012

Although underground water resource has relatively less pollution rate compared with surface water, its recovery faces many difficulties due to poor management. Our country monitors underground water to manage it effectively through auxiliary observation network for underground water. In this paper, we suggest water-well auto measure system based on Geosensor for business efficiency increase of water-well management and realtime monitering. In this system is consist of user GUI(Graphic User Interface) composed with water-well information and movement sub-observation network prototype system composed with GPS(Global Positioning System) and wireless sensor node such as water temperature, water level, electrical conductivity. In this system is using the light of the sun for self-power, variety water-well information collected wireless sensor node was a wireless transmitting/receiving a using CDMA(Code Division Multiple Access) module. Also, for promote with user ease, user GUI express that water-well collected in GIS(Geographic Information System) map. For performance evaluation of the proposed system, we perform experiment using sensing information through designed sub-observation network. And we was proved superiority of the proposed system through qualitative evaluation with other paper.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.538-540
• /
• 2004

Electrical currents generated by human heart activities create magnetic fields represented by MCG(MagnetoCardioGram). Since an MCG signal acquisition system requires precise and stable operation, the system adopts hundreds of SQUID(Superconducting QUantum Interface Device) sensors for signal acquisition. Such a system requires fast real-time data acquisition in a required sampling interval, i.e., 1 mili-second for each sensor. This paper presents designed hardware to acquire data from 256-channel analog signal with 1 ksamples/sec speed, using 12-bit 8-channel ADC devices, SPI interfaces, parallel interfaces, 8-bit microprocessors, and a DSP processor. We implemented SPI interface between ADCs and a microprocessor, parallel interfaces between microprocessors. Our result concludes that the data collection can be done in $168{\mu}sec$ time-interval for 256 SQUID sensors, which can be interpreted to 6 ksamples/sec speed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.4
• /
• pp.439-444
• /
• 2009

Recently, a wide range of next-generation's game consoles has been developed by many game makers. Particularly, active interaction between users and games is required more than ever before for giving gamers the fullest pleasure. In this work, an infrared image sensor based position recognition system which can be used for virtual game interface is proposed. Furthermore, two kinds of compensation algorithms and Extended Kalman Filter are utilized to enhance the performance of the proposed system. The proposed system can effectively generate the position of the gamer in the face of the coordinate distortion and noise. To verity the feasibilities of the proposed system, various experiments are carried out.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2595-2600
• /
• 2012

In this study, we propose the new interface system for the disabled and old people who do not well using electronic equipment that is used physical switch interface system. The proposed new interface system is consisted of speech and motion recognition system. Speech recognition system is mike in the headset, and motion recognition system is 3-axis accelerometer in the headset. In order to verify the usefulness of the proposed system, we make an experiment on new interface.