• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.643-650
• /
• 2002

It is necessary, in the light of the importance of long-term slope stability problem, to develop a simple method or tool which can figure out the possible failure zone resulted from weathering effect and other factors. The FBG sensor system is used to estimate the correlations between the temperature and the slope in Yunhwajae, and to find a failure zone in slopes effectively. This research is to seek for the correlation between the soil temperature distribution and the strain distribution in a active zone by analyzing the data from the in-situ measurement so that the possible failure zone should be well defined based on the correlation. The zone of high temperature fluctuation can be regarded as one of the possible sliding zone due to the weathering effect while the constant temperature depth of the ground, if exists, would not be relatively affected by the weathering process.

• 통합자연과학논문집
• /
• 제9권3호
• /
• pp.199-205
• /
• 2016

In this paper, we established ZIGBEE home network and combined smart-grid and u-Healthcare system. We assisted for amount of electricity management of household by interlocking home devices of wireless sensor, PLC modem, DCU and realized smart grid and u-Healthcare at the same time by verifying body heat, pulse, blood pressure change and proceeded living body signal by using SVM algorithm and variety of ZIGBEE network channel and enabled it to check real-time through IHD which is developed by user interface. In addition, we minimized the rate of energy consumption of each sensor node when living body signal is processed and realized Query Processor which is able to optimize accuracy and speed of query. We were able to check the result that is accuracy of classification 0.848 which is less accounting for average 17.9% of storage more than the real input data by using Mjoin, multiple query process and SVM algorithm.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.407-407
• /
• 2002

The most widespread techniques for DEM generation are stereoscopy for optical sensor images and interfereometry for SAR images. These techniques suffer from certain sensor and processing limitations, which can be overcome by the synergetic use of both sensors and DEMs respectively. In this paper, different strategies for fusing SAR and optical data are combined to derive high quality DEM products. The filtering techniques, which take advantage of the complementary properties of SAR and stereo optical DEMs, will be applied for the fusion process. By taking advantage of the fact that errors of the DEMs are of different nature using the filtering technique, affected part are filtered and replaced by those of the counterpart and is tested with two sets of SPOT and ERS DEM, resulting in a remarkable improvement in DEM. for the analysis of results, the reference DEM is generated from digital base map(1:5000).

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2019년도 춘계학술대회
• /
• pp.418-420
• /
• 2019

다양하게 요구되고 있는 해양 사물 인터넷 서비스 제공을 위하여 필요한 복합 센서 장치와 edge device를 제안하였다. 특히 통신 3사의 상용망 외에 폐쇄망을 통해 센싱 정보의 관리와 처리가 가능하도록 설계 제안하였다.

• Smart Structures and Systems
• /
• 제11권3호
• /
• pp.261-282
• /
• 2013

Structural health monitoring (SHM) is an application area of Wireless Sensor Networks (WSNs) which usually needs high data communication rate to transfer a large amount of monitoring data. Traditional sink node can only process data from one communication channel at the same time because of the single radio chip structure. The sink node constitutes a bottleneck for constructing a high data rate SHM application giving rise to a long data transfer time. Multi-channel communication has been proved to be an efficient method to improve the data throughput by enabling parallel transmissions among different frequency channels. This paper proposes an 8-radio integrated sink node design method based on Field Programmable Gate Array (FPGA) and the time synchronization mechanism for the multi-channel network based on the proposed sink node. Three experiments have been performed to evaluate the data transfer ability of the developed multi-radio sink node and the performance of the time synchronization mechanism. A high data throughput of 1020Kbps of the developed sink node has been proved by experiments using IEEE.805.15.4.

• 산업경영시스템학회지
• /
• 제35권4호
• /
• pp.118-125
• /
• 2012

When monitoring an instrumental process, one often collects a host of data such as characteristic signals sent by a sensor in short time intervals. Characteristic data of short time intervals tend to be autocorrelated. In the instrumental processes often the practice of adjusting the setting value simply based on the previous one, so-called 'adjacent point operation', becomes more critical, since in the short run the deviations are harder to detect and in the long run they have amplified consequences. Stochastic modelling using ARIMA or AR models are not readily usable here. Due to the difficulty of dealing with autocorrelated data conventional practice is resorting to choosing the time interval where autocorrelation is weak enough then to using I-MR control chart to judge the process stability. In the autocorrelated instrumental processes it appears that using the Shewhart chart and the time interval data where autocorrelation is relatively not existent turns out to be a rather convenient and very useful practice to determine the process stability. However in the autocorrelated instrumental processes we intend to show that one would presumably do better using the EWMA control chart rather than just using the Shewhart chart along with some arbitrarily intervalled data, since the former is more sensitive to shifts given appropriate weights.

• 센서학회지
• /
• 제7권2호
• /
• pp.124-130
• /
• 1998

독립적인 로보트나 자동차 제어 응용을 위하여 고속 3-D 비젼시스템들은 매우 중요하다. 이 논문은 다음과 같은 세가지 과정으로 구성되는 stereo vision process 개발에 대하여 논술한다 : 왼쪽과 오른쪽 이미지의 edges 추출, matching coresponding edges와 3-D map의 계산. 이 process는 VME 150/40 Imaging Technology vision system에서 이루어졌다. 이것은 display, acqusition, 4Mbytes image frame memory와 세 개의 연산 카드로 구성되는 modular system이다. 40 MHz로 작동하는 프로그래머불 연산 모듈은 $64{\times}32$ bit instruction cache와 두개의 $1024{\times}32$ bit RAM을 가진 TMS320C31 DSP에 기초를 두고 있다. 그것들은 각각 512 Kbyte static RAM, 4 Mbyte image memory, 1 Mbyte flash EEPROM과 하나의 직렬 포트로 구성되어있다. 모듈간의 데이터 전송과 교환은 8 bit globalvideo bus와 세 개의 local configurable pipeline 8 bit video bus에 의하여 이루어졌고, system management를 위하여 VME bus가 쓰였다. 두 개의 DSP는 왼쪽 및 오른쪽 이미지 edges 검출을 위하여 쓰였고 마지막 processor는 matching process와 3-D 연산에 사용되었다. $512{\times}512$픽셀 이미지에서 이 센서는 scene complexity에 따라 1Hz정도의 조밀한 3-D map을 생성했다. 특수목적의 multiprocessor card들을 사용하면 결과를 향상시킬 수 있을 것이다.

• 한국정보통신학회논문지
• /
• 제14권4호
• /
• pp.1023-1031
• /
• 2010

최근 하드웨어와 무선 통신 기술의 발달로 무선 센서네트워크를 이용하여 멀티미디어 데이터를 수집하기 위한 무선 멀티미디어 센서네트워크에 관한 연구가 활발히 이루어지고 있다. 많은 데이터를 갖는 멀티미디어 데이터를 네트워크 대역폭이 극히 낮은 무선 센서 네트워크에서 처리하기 위해서는 네트워크 상태에 따른 효율적인 데이터 압축과 전송에 관한 연구가 필요하다. 본 논문에서는 무선 센서네트워크에서 대표적인 멀티미디어 데이터인 이미지 데이터를 예측부호화를 통해 압축된 이미지를 우선순위에 기반하여 전송하기 위한 이미지 전송 기법(Priority based Image Transmission Technique With Wavelet Transform)을 제안한다. 제안하는 PIT 기법은 이미지의 웨이블릿 변환을 통하여 나누어진 영역별로 서로 다른 우선순위를 설정한다. PIT기법은 패킷의 우선순위에 따라 전달 여부를 결정하도록 하여 중요한 데이터일수록 전송이 성공할 가능성을 높인다. PIT기법은 웨이블릿 변환의 특성상 데이터의 일부가 손실되더라도 최대한 전체적인 내용을 파악할 수 있는 장점을 활용한다. PIT에서는 연속적인 이미지 사이의 유사성을 고려한 저주파수 영역에서의 예측부호화(DPCM)을 통하여 이미지 데이터가 우선순위별로 균등하게 분포시킴으로써 화질열화를 최소화한다. 실험을 통하여 제안하는 기법이 데이터가 손실되더라도 높은 화질을 보장함을 보인다.

• 한국기계가공학회지
• /
• 제20권3호
• /
• pp.1-7
• /
• 2021

With the advent of industry 4.0, big data and machine learning techniques are being widely adopted in the maintenance domain. Inverters are widely used in many engineering applications. However, overloading and complex operation conditions may lead to various failures in inverters. In this study, failure mode effect analysis was performed on inverters and voltages collected to investigate the over-voltage effect on capacitors. Several features were extracted from the collected sensor data, which indicated the health state of the inverter. Based on this correlation, the best features were selected for classification. Moreover, random forest classifiers were used to classify the healthy and faulty states of inverters. Different performance metrics were computed, and the classifiers' performance was evaluated in terms of various health features.

• 대한조선학회논문집
• /
• 제59권5호
• /
• pp.314-322
• /
• 2022

During the shipbuilding process, many blocks are moved between shipyard workshops by block carrying vehicles called a transporter. Because block logistics management is one of the essential factors in enhancing productivity, it is necessary to manage block information with the transporter that moves it. Currently, because a large amount of data per day are collected from sensors attached to blocks and transporters via IoT infrastructure installed in shipyards, automated methods are needed to analyze them. Therefore, in this study, we developed an algorithm that can automatically match the transporter and the working block based on the GPS sensor data. By comparing the distance between the transporter and the blocks calculated from the Haversine formula, the block is found which is moved by the transporter. In this process, since the time of the measured data of moving objects is different, the time standard for calculating the distance must be determined. The developed algorithm was verified using actual data provided by the shipyard, and the correct result was confirmed with the distance based on the moving time of the transporter.