• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.518-523
• /
• 2002

Nowadays the Rational Function Model (RFM), an abstract sensor model, is substituting physical sensor models for highly complicated imaging geometry. But RFM is algorithm to be required many Ground Control Points (GCP). In case of RFM of the third order, At least forty GCP are required far RFM generation. The purpose of this study is to research more efficient algorithm on GCP and accurate algorithm similar to RFM. The Polynomial Camera Model is relatively accurate and requires a little GCP in comparisons of RFM. This paper introduces how to generate Polynomial Camera Model and fundamental algorithms for construction of 3-D topographic data using the Polynomial Camera Model information in the Kompsat stereo pair and describes how to generate the 3-D ground coordinates by manual matching. Finally we tried to extract height information for the whole image area with the stereo matching technique based on the correlation.

• Journal of International Society for Simulation Surgery
• /
• 제1권2호
• /
• pp.83-86
• /
• 2014

Purpose This paper was purposed to suggest the method to produce the supportive helmet (head correction) for the infants who are suffering from plagiocephaly and to evaluate the level of transformation through 3D model. Method Either of CT or X-ray restored images has been used in making the supportive helmet (Head correction) in general, but these methods of measuring have problems in cost and safety. 3D surface measurement technology was suggested to solve such matters. Results It was to design the transformed model of the head within 0.7cm in average by scanning the surface of head and performing 3D restoration with marching cube and the changing rate of the head was compared in numerical data with 3D model. Conclusion The suggested methods displayed the better performance than the conventional method in respect of the speed and cost.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1177-1179
• /
• 2003

Recently, the ground-based laser profiler is used for acquisition of 3D spatial information of a rchaeological objects. However, it is very difficult to measure complicated objects, because of a relatively low-resolution. On the other hand, texture mapping can be a solution to complement the low resolution, and to generate 3D model with higher fidelity. But, a huge cost is required for the construction of textured 3D model, because huge labor is demanded, and the work depends on editor's experiences and skills . Moreover, the accuracy of data would be lost during the editing works. In this research, using the laser profiler and a non-calibrated digital camera, a method is proposed for the automatic generation of 3D model by integrating these data. At first, region segmentation is applied to laser range data to extract geometric features of an object in the laser range data. Various information such as normal vectors of planes, distances from a sensor and a sun-direction are used in this processing. Next, an image segmentation is also applied to the digital camera images, which include the same object. Then, geometrical relations are determined by corresponding the features extracted in the laser range data and digital camera’ images. By projecting digital camera image onto the surface data reconstructed from laser range image, the 3D texture model was generated automatically.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 추계학술대회
• /
• pp.617-619
• /
• 2022

3D 프린팅 기술을 이용하여 광섬유가 내장된 임베디드 센서 구조물을 제조하였으며, 광주파수 반사 산란광 측정법 기반의 분포 센서 기술을 이용하여 대상 구조물에 인가된 스트레인 분포를 측정하였다. 측정된 분포 데이터는 대상 구조물 형상에 실시간 대입하여 3차원 시각화 표현하였다.

• 지구물리
• /
• 제9권1호
• /
• pp.7-19
• /
• 2006

Laser scanning is a new technology for obtaining Digital Surface Models(DSM) of the earth surface.It is a fast method for sampling the earth surface with high density and high point accuracy. This paper is for buildings extraction from LiDAR points data. The core part of building construction is based on a parameters filter for distinguishing between terrain and non-terrain laser points. The 3D geometrical properties of the building facades are obtained based on plane fitting using least-squares adjustment. The reconstruction part of the procedure is based on the adjacency among the roof facades. Primitive extraction and facade intersections are used for building reconstruction. For overcome the difficulty just reconstruct of laser points data used with digital camera images. Also, 3D buildings of city area reconstructed using digital map. Finally, In this paper show 3D building Modeling using digital map and LiDAR data.

• 한국지리정보학회지
• /
• 제10권1호
• /
• pp.1-9
• /
• 2007

최근 들어 보행자 내비게이션을 위한 3차원 공간데이터의 요구가 급증하고 있다. 보행자 내비게이션에 있어서, 3차원 모델은 일반인의 시각에서 구체적으로 표현되어야 할 필요가 있다. 보행자 내비게이션을 위한 공간을 상세하게 구현하기 위해서는 실외 환경뿐만 아니라 지하쇼핑센터와 같은 실내 환경에서도 적용될 수 있는 3차원 모델을 개발하는 것이 필수적이다. 그러나 GPS 없이 모바일 맵핑만으로 3차원 데이터를 효율적으로 취득하기란 대단히 어렵다. 본 연구에서는 3차원 형상을 레이저 스캐너로 측정하고, 표면 텍스쳐는 CCD 센서로 취득하였으며, 계속적으로 변화하는 센서의 위치와 높이는 IMU를 통해 측정하였다. 또한 IMU의 위치데이터는 GPS의 위치보정 없이 CCD 이미지의 상대 표정을 통해 수정하였다. 연구결과로써, 디지털 카메라 및 레이저 스캐너와 IMU와의 통합을 통해 실내 환경에서 신뢰성 높고, 빠르며, 간편하게 3차원 공간 데이터를 취득할 수 있는 방법을 제안하였다.

• 로봇학회논문지
• /
• 제11권3호
• /
• pp.156-162
• /
• 2016

For the underwater localization, acoustic sensor systems are widely used due to greater penetration properties of acoustic signals in underwater environments. On the other hand, the good penetration property causes multipath and interference effects in structured environment too. To overcome this demerit, a localization method using the attenuation of electro-magnetic(EM) waves was proposed in several literatures, in which distance estimation and 2D-localization experiments show remarkable results. However, in 3D-localization application, the estimation difficulties increase due to the nonuniform (doughnut like) radiation pattern of an omni-directional antenna related to the depth direction. For solving this problem, we added a depth sensor for improving underwater 3D-localization with the EM wave method. A micro scale pressure sensor is located in the mobile node antenna, and the depth data from the pressure sensor is calibrated by the curve fitting algorithm. We adapted the depth(z) data to 3D EM wave pattern model for the error reduction of the localization. Finally, some experiments were executed for 3D localization with the fast calculation and less errors.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2009년도 학술대회
• /
• pp.324-329
• /
• 2009

Proactive computing의 핵심 기술인 손동작 인식 (Hand Motion Recognition, HMR) 기술은 인간과 컴퓨터 사이의 상호작용(Human Computer Interaction, HCI) 분야에서 많은 연구가 진행되고 있다. 본 연구에서는 3축 가속도 센서를 부착한 data glove를 제작하고, 3차원 손 모델을 구현한 후, 이를 이용한 손동작 인식 기술을 개발하였다. Data glove는 가상현실에 대한 입력 장치로써 본 논문에서는 3축 가속도 센서를 사용하여 획득된 신호를 wireless communication으로 PC에 전송할 수 있도록 구현하였다. 손 모델링은 ellipsoid를 이용한 kinematic chain 이론 바탕의 3차원 손 모델을 구현하였으며, data glove에서 얻어진 가속도 정보에 rule 기반의 알고리즘을 적용하여 구현된 3차원 손 모델을 통하여 간단한 손동작(가위, 바위, 보)을 인식하였다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제30권12호
• /
• pp.1239-1246
• /
• 2003

대상 물체의 3차원 모델을 구축하기 위해서는 여러 시점에서 측정된 거리정보 데이타들을 하나의 좌표계로 통합하는 정합(registration) 과정이 필수적이다. 3차원 데이타의 정합을 위해 가장 널리 사용되는 ICP(Iterative Closest Point) 알고리즘은 거리정보 데이타 간에 겹치는 영역 또는 일치점 등에 대한 사전 정보가 필요하다. 본 논문에서는 임의의 시점에서 측정된 데이타를 반복적인 방법에 의해 자동으로 정합하는 개선된 ICP 방법이 제안된다. 3차원 데이타가 거리정보 영상으로 맺히는 관계를 나타내는 센서 사영조건(projection constraint), 데이타의 공분산(covariance) 행렬, 교차(cross) 사영 등을 이용하여 정합과정을 자동화하였으며, 유저의 개입이나 3차원 기계 보조 장치 등을 사용하는 별도의 초기값 측정 없이 3차원 모델을 정확하게 구성할 수 있다. 다양한 거리정보 데이타에 대한 실험을 통해 제안된 방법의 우수한 성능을 확인하였다.

• 대한원격탐사학회지
• /
• 제28권3호
• /
• pp.319-327
• /
• 2012

In this paper, we introduce a newly developed photogrammetric software for automatic generation of high quality geo-products and its performance assessment carried out using various satellite images. Our newly developed software provides the latest techniques of an optimized sensor modelling, ortho-image generation and automated Digital Elevation Model (DEM) generation for diverse remote sensing images. In particular, images from dual- and multi-sensor images can be integrated for 3D mapping. This can be a novel innovation toward a wider applicability of remote sensing data, since 3D mapping has been limited within only single-sensor so far. We used Kompsat-2, Ikonos, QuickBird, Spot-5 high resolution satellite images to test an accuracy of 3D points and ortho-image generated by the software. Outputs were assessed by comparing reliable reference data. From various sensor combinations 3D mapping were implemented and their accuracy was evaluated using independent check points. Model accuracy of 1~2 pixels or better was achieved regardless of sensor combination type. The high resolution ortho-image results are consistent with the reference map on a scale of 1:5,000 after being rectified by the software and an accuracy of 1~2 pixels could be achieved through quantitative assessment. The developed software offers efficient critical geo-processing modules of various remote sensing images and it is expected that the software can be widely used to meet the demand on the high-quality geo products.