• Structural Engineering and Mechanics
• /
• 제18권6호
• /
• pp.709-729
• /
• 2004

This paper presents numerical and experimental investigations on damage detection of mono-coupled multistory buildings using natural frequency as only diagnostic parameter. Frequency equation of a mono-coupled multistory building is first derived using the transfer matrix method. Closed-form sensitivity equation is established to relate the relative change in the stiffness of each story to the relative changes in the natural frequencies of the building. Damage detection is then performed using the sensitivity equation with its special features and minimizing the norm of an objective function with an inequality constraint. Numerical and experimental investigations are finally conducted on a mono-coupled 3-story building model as an application of the proposed algorithm, in which the influence of modeling error on the degree of accuracy of damage detection is discussed. A mono-coupled 10-story building is further used to examine the capability of the proposed algorithm against measurement noise and incomplete measured natural frequencies. The results obtained demonstrate that changes in story stiffness can be satisfactorily detected, located, and quantified if all sensitive natural frequencies to damaged stories are available. The proposed damage detection algorithm is not sensitive to measurement noise and modeling error.

• Bulletin of the Korean Chemical Society
• /
• 제28권4호
• /
• pp.657-661
• /
• 2007

The specific rates of solvolysis of isopropyl fluoroformate are well correlated using the extended Grunwald-Winstein equation, with a sensitivity (l ) to changes in solvent nucleophilicity (NT) and a sensitivity (m) to changes in solvent ionizing power (YCl). The sensitivities (l = 1.59 ± 0.16 and m = 0.80 ± 0.06) toward changes in solvent nucleophilicity and solvent ionizing power, and the kF/kCl values are very similar to those for solvolyses of n-octyl fluoroformate, suggesting that the addition step of an addition-elimination mechanism is rate-determining. For methanolysis, a solvent deuterium isotope effect of 2.53 is compatible with the incorporation of general-base catalysis into the substitution process. The large negative values for the entropies of activation are consistent with the bimolecular nature of the proposed rate-determining step. These observations are also compared with those previously reported for the corresponding chloroformate and fluoroformate esters.

• Geomechanics and Engineering
• /
• 제24권3호
• /
• pp.295-305
• /
• 2021

In this study, design charts for estimating consolidation settlement are proposed according to finite strain consolidation theory using a nonlinear constitutive relationship equation. Results of parametric sensitivity analysis shows that the final settlement, initial height, and initial void ratio exerted the greatest effect, and the coefficients of the void ratio-effective-stress. Proposed design charts were analyzed for three regions using a representative constitutive relationship equation that enables major dredged-reclaimed construction sites in Korea. The regional design charts can be calculated accurately for the final settlement because it is applied directly to the numerical analysis results, except for reading errors. A general design chart applicable to all marine clays is proposed through correlation analysis of the main parameters. A final self-weight consolidation settlement with various initial void ratios and initial height conditions should be estimated easily using the general design chart and constitutive relationship. The estimated final settlement using the general design chart is similar to the results of numerical analysis obtained using finite strain consolidation theory. Under an overburden pressure condition, design charts for estimating consolidation settlement are proposed for three regions in Korea.

• 대한인간공학회지
• /
• 제20권2호
• /
• pp.59-70
• /
• 2001

White uniformity is one of the important inspection factors determining the image quality of CRT screen. In the full white pattern, white uniformity means the degree of uniform distribution of white color across the whole screen. To elicit the sensitivity factors affecting the decision of the white uniformity quality, experiments in which participants were confronted with 6 evaluation points embedded in 3 measurement groups on a CRT screen were conducted to gather the psychophysical data that are the level of white uniformity subjects perceived and CA100 produced. These data were used to develop a modified CIE1976 equation for calculating white uniformity. Performance comparison between the original CIE1976 equation and the modified equation was conducted in terms of accuracy test and magnitude estimation. It was concluded the modified equation is more sensitive in the change of white uniformity, compared to the original CIE1976 equation.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 추계 학술대회논문집
• /
• pp.176-182
• /
• 2000

This paper presents methods for dynamic stall control utilizing an optimization approach. Unsteady aerodynamic sensitivity code is developed using a direct diffentiation method from a discrete two-dimensional unsteady compressible Navier-Stokes code including a two-equation turbulence model. Dynamic stall control is conducted by minimizing an objective function defined at an instant instead of integrating a response for a period of time. Unsteady sensitivity derivative of the objective function is calculated by the sensitivity code, and optimization is conducted using a linear line search method at every physical time level. Examples of dynamic stall control utilizing airfoils nose radius or maximum thickness variation show very satisfactory results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.567-569
• /
• 1992

Design sensitivity analysis is proposed for the optimal shape design of three dimensional magnetostatic problems. The direct differentiation method is introduced for design sensitivity analysis and the boundary element method with reduced magnetic scalar potential as the state variable is used to analyze the magnetic characteristics. In the direct differentiation method, the design sensitivity, defined as the total derivative of the objective function with respect to the design variables, is calculated based on the variation of the state variable with respect to the design variable. And the variation of He state variable is calculated by differentiating the both sides of the system matrix equation obtained by applying boundary element method. Through the numerical example with simple electromagnet, the usefullness is proved.

• 산업기술연구
• /
• 제28권B호
• /
• pp.123-127
• /
• 2008

This paper studied the sensitivity characteries of the electronic ballast for the discharge lamps, which implies variation ratio of the output power by the passive element variation. We have derived the equation to represent the lamp power, and obtained the sensitivity characteristic equations. The simulation result shows that the proposed equations are correct and very useful to design the electronic ballast with the LCpCs-type resonant tank.

• 대한전기학회논문지
• /
• 제40권9호
• /
• pp.859-865
• /
• 1991

This paper presents a new shaoe optimal design method using Desing Sensitivity Analysis. Design Sensitivity, defined as the variation of the object function with respect to the design variables, is based on the total differentiation of the matrix equation obtained from discretization of governing equations with respect to design variables. Analysis of the various characteristics adn calculation of Design Sensitivity of optimization model are achieved by using finite or boundary element methods. The proposee algorithm is applied to the optimal shape design of high voltage electrode under specified conditions. It is shown, from the numerical results, that the algorithm is very useful for the optimal shape design of electric apparatus.

• 대한전기학회논문지
• /
• 제41권8호
• /
• pp.850-857
• /
• 1992

Design sensitivity analysis is proposed for the optimal shape design of three-dimensional magnetostatic problems. The direct differentiation method is introduced for design sensitivity analysis and the boundary element method with reduced magnetic scalar potential as the state variable is used to analyze the magnetic characteristics. In the direct differentiation method, the design sensitivity, defined as the total derivative of the objective function with respect to the design variables, is calculated based on the variation of the state variable with respect to the design variable. And the variation of the state variable is calculated by differetiating the both sides of the system matrix equation obtained by applying boundary element method. Through the numerical example with simple electromagnet, the usefulness is proved.

• 무역학회지
• /
• 제44권6호
• /
• pp.169-185
• /
• 2019

The purpose of this study is to analyze the structural relationships of perceived value, price sensitivity, and satisfaction between brand image and purchase intention of consumers who have experience of overseas direct purchase. This study collected questionnaires used to analyze these structural relationships. Using the R's plspm package, we analyzed the PLS (partial least squares) structural equation model. In order to examine the relationship between perceived value and price sensitivity, the research model was modified and analyzed. As a result, not only the adoption of the research hypothesis, but also the goodness of fit was higher than before the research model modifying, and the relationship between perceived value and price sensitivity was further verified. The modified research model has higher academic value, so it is necessary to select it as the final proposal model.