• Archives of Pharmacal Research
• /
• 제29권11호
• /
• pp.1055-1060
• /
• 2006

The objective of this study was to formulate itraconazole semisolid dosage forms and characterize their physicochemical properties. Itraconazole and excipients such as polysorbate 80, fatty acids, fatty alcohols, oils and organic acids were melted at $160^{\circ}C$. The fused solution was then cooled immediately at $-10^{\circ}C$ to make wax-like semisolid preparations. Their physicochemical attributes were first characterized using differential scanning calorimetry, Fourier transform infrared spectroscopy and nuclear magnetic resonance spectrometry. The solubility of itraconazole in semisolid preparations and their dispersability in the simulated gastric fluid were also determined. Our semisolid preparations did not show any distinct endothermic peak of a crystalline form of itraconazole around $160-163^{\circ}C$. This suggested that it was changed into amorphous one, when it was formulated into semisolid preparations. In addition, the distinctive functional peaks and chemical shifts of itraconazole were well retained after processing into semisolid preparations. It could be inferred from the data that itraconazole was stable during incorporation into semisolid preparations by the hot melt technique. In particular, itraconazole semisolid preparations composed of polysorbate 80, fatty acids and organic acids showed good solubility and dissolution when dispersed in an aqueous medium. It was anticipated that the semisolid dosage forms would be industrially applicable to improving the bioavailability of poorly water-soluble drugs.

• 한국주조공학회지
• /
• 제25권6호
• /
• pp.254-258
• /
• 2005

Semisolid process is possible in any material system possessing a freezing range where the microstructure should consist of the nondendritic globular solid phase separated and enclosed by the liquid phase, referred to as semisolid slurry. There are two primary semisolid processing routes, thixocasting and rheocasting. Especially, rheocasting process has become a new focus in the field of semisolid process because of its many advantages such as no special billet required and possibility of in-house scrap recycling, compared with the thixocasting process. In-Ladle direct thermal control (DTC) rheocasting has been developed, based on the fact that there is slurry and mush transition in every molten metal and the transition, which normally occurs in the range of liquid traction of 0.1 to 0.6, could be controlled by controlling solid shape and relative solid-liquid interfacial energy. In this study, A356 Al alloy was investigated to verify In-Ladle DTC rheocasting for obtaining semisolid slurry. Modeling of heat transfer was carried out to investigate the effect of pouring temperature and ladle material, geometry and temperature and the simulation results were compared with the actual experiments.

• Journal of Pharmaceutical Investigation
• /
• 제35권3호
• /
• pp.207-224
• /
• 2005

The objective of this study was to explore the principles of SUPAC-SS and its regulatory application in handling postapproval changes to nonsterile semisolid dosage forms. The types of postapproval changes that SUPAC-SS described were modifications in formulation (components and composition), batch size, manufacturing equipment & process, and the site of manufacturing. SUPAC-SS defined the levels of postapproval changes and what chemistry, manufacturing, and control tests should be conducted for each change level. The guidance also specified several occasions the manufacturers should perform in vitro release test (Franz cell diffusion test) and/or in vivo bioequivalence test. Finally, SUPAC-SS classified appropriate filing forms to be used in supporting postapproval changes. It was crystal clear that SUPAC-SS helped maintain the safety and quality of approved semisolid dosage forms when they were subject to certain postapproval changes. The availability of SUPAC-SS made contributions to reducing regulatory burdens of the industry, as well as expediting the postapproval process of regulatory agencies. This study also shed light on the background of relevant pharmaceutical sciences that the SUPAC-SS guidance adopted. Finally, the KFDA and the industry were strongly urged to implant a similar guidance in handling postapproval changes to semisolid dosage forms available in the Korean marketplace.

• 한국임상수의학회지
• /
• 제17권2호
• /
• pp.403-410
• /
• 2000

The Ultrasonographic method alas been widely applied to evaluating gastric motility with safety and reproducibility ill human medicine but few reference to its use in veterinary medicine is appeared. Therefore, in this study, the gastric motility was evaluated with ultrasonography by the cri-terion of mean cycle lime, short and lony axis and the area of pyloric antrum in dogs, fed with liquid of semisolid meals. Furthermore, the animals were evaluated for the effect of metoclopramide on the motility of pyloric antrum. Healthy 5 mongrel male dogs were fed with either 400 ml of milk a: a liquid meal or a mixed meal of 200 ml of milk with two pieces of bread as a semisolid meal. Mean cycle time of pyloric antrum of dogs was significantly delayed after feeding either of liquid and , semi- solid meals(P<0.05), alls it was returned to the fasting state at 60 min. after feeding of liquid meal and 160 min. after feeding of semisolid meal. Mean area of pyloric antrum of dogs was gradually decreased and was returned to the lasting state at 80 min. in doss fed liquid meal. but 1600 min. in dog\ulcorner fed semisolid meal. The administration of metoclopramide (1.0 mg/kg of of B.W.) accelerated the mean cycle time of pyloric antrum from 20 mill. to 60 min. after feeding of liquid meal and from 40 min. to 120 min. after feeding of semisolid meal. From this study, the ultrasonography was confirmed as a valuable diagnostic method leer evaluating the gastric motility and gastric area in dogs. It is non-invasive, safe and reproducible, and provides a method for the study of the effect of drugs and diseases states on gastric motility.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.148-151
• /
• 2004

Different kinds of feedstock of semisolid a356 aluminum alloy manufactured by EMS stirring only, inoculation of Al-5Ti-B only and combination of inoculation and EMS stirring were investigated. It is found that the grain size of these feedstock are $350{\mu}m$ for EMS casting only, $320{\mu}m$ for inoculation by Al-5Ti-B, and $100{\mu}m$ for the combination of EMS stirring and inoculation of Al-5Ti-B master alloys. The microstructure of the sample obtain by combination of inoculation and EMS system show the best homogeneousness and finest grains.

• Archives of Pharmacal Research
• /
• 제2권2호
• /
• pp.89-97
• /
• 1979

To find out the rheological characteristics of several pharamaceutical semisolid products, experiments were carriedout over the temperature range of 20 to 30 .deg.C . From continuous shear rheograms obtained with a Ferranti-Shirley cone and plate viscometer, loop area, shear rates, ryild values, limiting viscosities and activation energies were calculated. The systems were metastable and their viscosity decreased with time. As the temperature was raised, products studied showed a decrease in viscosity and yield value.

• Applied Biological Chemistry
• /
• 제19권4호
• /
• pp.219-226
• /
• 1976

옥수수 전분박을 이용하여 식사료 효모를 생산하기 위하여 전분박의 산당화법을 검토하고 이 산당화액을 이용하여 liquid culture에서 식용효모, semisolid culture에서 사료효모를 생산하기 위한 배양조건을 검토한 바 다음과 같은 결과를 얻었다. 1) 옥수수 전분박의 신당화시 가수분해제로는 염산이 황산보다 효과적이었으며, 염산 농도 1%, 압력 $2.0kg/cm^2$에서 30분간 가수분해 시켰을 때 당화율이 57.2%로서 가장 좋았다. 2) 산분해시 원료와 전분박의 비가 1:10 이상에서는 분해가 증가되지 않았으며 semisolid substrate를 만들기 위해서는 1:3의 비율이 적당하였다. 3) 6종류의 효모를 전분박 당화액에 배양시켰을 때 Candida tropicalis가 가장 좋았으며, 최적 초기 pH는 6이었으며, 최적온도는 $30^{\circ}C$였다. 4) Liquid culture에서 Candida tropicalis의 무기 영양 요구도를 조사한 결과 $(NH_2)_2CO$ 0.3%, $KH_2PO_4$, 0.15%, $MgSO_4{\cdot}7H_2O$ 0.04%였으며, semisolid culture시에는 $NH_4CI$ 0.4%, $KH_2PO_4\;0.1%\;MgSO_4{\cdot}7H_2O\;0.04%$를 가했을 때가 좋았다. 5) 식용 효모생산을 위한 액체배양에서는 초기당 4%에서 88.75%를 소비하였으며, 원료에 대한 건조효모로써 19.13%의 수율을 보였다. 6) 사료효모를 생산하기 위해 semisolid한 상태에서 배양하였을 때 처리하지 않은 전분박에 비해cellulose는 14.7%에서 3.76%로 감소하였으며, 건조효모는 13.89%가 생성되었다.

• 소성∙가공
• /
• 제11권2호
• /
• pp.114-122
• /
• 2002

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.668-671
• /
• 2004

The mechanics of the dendrite fragmentation is a very important aspect of grain refinement in rheocasting. In this work, the stress field of the dendrite stirred in the semisolid slurry was simulated by Metlab 6.0 software. The result shows that stress concentration at the root of the dendrite arms is great enough to cause plastic deformation though the agitation is moderate. Accordingly, dendrite fragmentation was suggested to be caused by fractured after fatigue erosion.

• 한국주조공학회지
• /
• 제17권1호
• /
• pp.67-75
• /
• 1997

The semisolid processing of two Al-Si alloys, A356 and Al-25wt%Si, was studied with using the rotor composed of permanent magnets. The semisolid slurry was agitated by the electromagnetic force induced from the rotating permant magnets. The round shaped primary ${\alpha}$ phases were formed in A356 alloy as a result of agitation. In Al25wt%Si alloy, spherodization of primary Si particles was not observed with the rotation of the magnets. The primary Si particles were segregated to the outer surface area of sample, which became pronounced with increasing the rotating speed of magnets.