• 항공우주시스템공학회지
• /
• 제14권5호
• /
• pp.33-41
• /
• 2020

항공기의 착륙장치는 지상에서 동체로 전달되는 충격에너지를 흡수 및 소산시키는 장치이다. 착륙장치 중 반능동형 MR 댐퍼 착륙장치는 다양한 착륙조건에서 높은 충격흡수효율을 보여주며 제어 불능 시 안정성을 확보할 수 있는 장점이 있다. 오리피스가 아닌 환형 관유로를 이용하는 MR 댐퍼 착륙장치의 경우, 유로 압력강하로 인해 발생하는 감쇠력이 MR 댐퍼 내부 형상 구조에 따라 저압 챔버에서 캐비테이션을 유발할 수 있어 기존의 2 자유도계 모델링 기법보다 다중물리시스템 해석 프로그램인 Amesim이 더 유용하다. Amesim을 이용한 해석결과를 바탕으로 착륙장치 내부 유로 형상 배치를 수정하여 캐비테이션을 방지할 수 있는 유로 구조를 제안하였고 낙하 시험 시뮬레이션 결과를 통해 이를 검증하였다. 본 논문에서는 환형 관로 형태 유로 구조를 갖는 MR 댐퍼형 착륙장치의 캐비테이션 발생시 주요 특성을 파악하였고, 아울러 내부형상 배치 수정을 통해 이를 방지하는 방안을 제시하였다.

• Smart Structures and Systems
• /
• 제23권6호
• /
• pp.695-702
• /
• 2019

The number of cable-stayed bridges has been increasing worldwide, causing issues in maintaining the structural safety and integrity of bridges. The stay cable, one of the most critical members in cable-stayed bridges, is vulnerable to wind-induced vibrations owing to its inherent low damping capacity. Thus, vibration mitigation of stay cables has been an important issue both in academia and practice. While a semi-active control scheme shows effective vibration reduction compared to a passive control scheme, real-world applications are quite limited because it requires complicated equipment, including for data acquisition, and power supply. This study aims to develop an Arduino-based integrated cable vibration control system implementing a semi-active control algorithm. The integrated control system is built on the low-cost, low-power Arduino platform, embedding a semi-active control algorithm. A MEMS accelerometer is installed in the platform to conduct a state feedback for the semi-active control. The Linear Quadratic Gaussian control is applied to estimate a cable state and obtain a control gain, and the clipped optimal algorithm is implemented to control the damping device. This study selects the magnetorheological damper as a semi-active damping device, controlled by the proposed control system. The developed integrated system is applied to a laboratory size cable with a series of experimental studies for identifying the effect of the system on cable vibration reduction. The semi-active control embedded in the integrated system is compared with free and passive mode cases and is shown to reduce the vibration of stay-cables effectively.

• Smart Structures and Systems
• /
• 제15권4호
• /
• pp.963-995
• /
• 2015

The effectiveness of the various control algorithms for semi-active structural control systems proposed in the literature is highly questionable when dealing with earthquake actions, which never reach a steady state. From this perspective, the paper summarizes the results of an experimental activity aimed to compare the effectiveness of four different semi-active control algorithms on a structural mock up representative of a class of structural systems particularly prone to seismic actions. The controlled structure is a near full scale 2-story steel frame, equipped with two semi-active bracing systems including two magnetorheological dampers designed and manufactured in Europe. A set of earthquake records has been applied at the base of the structure, by utilizing a shaking table facility. Experimental results are compared in terms of displacements, absolute accelerations and energy dissipation capability. A further analysis on the percentage incidence of undesired and/or unpredictable operations corresponding to each algorithm gives an insight on some factors affecting the reliability and, in turn, the real effectiveness of semi-active structural control systems.

• Smart Structures and Systems
• /
• 제11권5호
• /
• pp.435-451
• /
• 2013

High-rise buildings are a common feature of urban cities around the world. These flexible structures frequently exhibit large vibration due to strong winds and earthquakes. Structural control has been employed as an effective means to mitigate excessive responses; however, structural control mechanisms that can be used in tall buildings are limited primarily to mass and liquid dampers. An attractive alternative can be found in outrigger damping systems, where the bending deformation of the building is transformed into shear deformation across dampers placed between the outrigger and the perimeter columns. The outrigger system provides additional damping that can reduce structural responses, such as the floor displacements and accelerations. This paper investigates the potential of using smart dampers, specifically magnetorheological (MR) fluid dampers, in the outrigger system. First, a high-rise building is modeled to portray the St. Francis Shangri-La Place in Philippines. The optimal performance of the outrigger damping system for mitigation of seismic responses in terms of damper size and location also is subsequently evaluated. The efficacy of the semi-active damped outrigger system is finally verified through numerical simulation.

• 한국소음진동공학회논문집
• /
• 제26권2호
• /
• pp.157-164
• /
• 2016

이 논문은 MR 댐퍼를 적용한 맥퍼슨 타입의 반 능동 현가장치의 진동제어에 관한 연구를 보여준다. 맥퍼슨 스트럿의 기하학적 분석을 바탕으로 동역학 지배 방정식이 설립되었으며, 제어기 설계를 위해 평형 점 근처의 비선형적 운동이 선형화하였다. 이어서 시스템의 향상된 반응시간을 위해 새로운 적응 움직임 슬라이딩모드 제어기를 제안하였으며, 시뮬레이션을 통해 범프와 랜덤도로에서 차량으로 가해지는 진동에 따른 제어 성능을 기존슬라이딩모드 제어기 및 스카이훅 제어기와의 비교를 통해 우수성을 평가하였다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.393-400
• /
• 2006

One of the most promising semi-active devices proposed for structural control is magnetorheological fluid (MR) dampers. While many researches are making too much of application to structural control, few of papers are considering how to design the MR dampers having good performance. In this paper, the sub-optimal design procedure for MR dampers is presented. This paper shows that an MR damper having the capacity of about 5,000 N is designed according to proposed procedure, as an exmple.

• 한국지진공학회논문집
• /
• 제23권4호
• /
• pp.211-219
• /
• 2019

In this study, SMG(Smart Material with Grease) was developed, which was improved the precipitation minute particle in grease during long term standstill. Also, small-sized cylinder damper equipped with an electromagnet in a piston was developed for using a performance evaluation of the damper with SMG and the dynamic load test, and damping force using Power model and Bingham model was derived in order to compare to the result of that of the damper. The data obtained from the dynamic load test were analyzed and plotted, and then a dynamic range was calculated to evaluate the usability of the damper with SMG. The performance of the damper with SMG was compared to the damping forse derived from the Power and Bingham model. The result of this evaluation shown that the usability of SMG damper was demonstrated by this test as a semi-active controlling equipment of small-sized damper.

• 대한토목학회논문집
• /
• 제34권3호
• /
• pp.729-737
• /
• 2014

비대칭 사장교에 지진으로 인한 진동을 MR(Magneto-rheological) 댐퍼를 이용하여 효과적으로 제어하는 연구를 수행하였다. MR 댐퍼의 실용적인 사용성을 높이기 위하여 비대칭 사장교 구조물을 설계/제작하고, 이 교량구조물을 적정하게 제어할 수 있도록 MR 댐퍼를 제작하였다. El-centro 지진파로 비대칭 사장교를 수평방향으로 가진하여 수직방향과 수평방향의 진동을 제어하는 실험을 하였다. 각 방향의 진동제어 실험에 5가지의 제어 조건으로 MR 댐퍼의 제어성능을 평가 하였다. 실험결과 MR 댐퍼는 지진진동으로 인한 비대징사장교를 진동제어 하기 위하여 Lyapunov Control 알고리즘과 Clipped-optimal control 알고리즘을 이용하여 제어를 할 경우, 보다 효과적으로 진동을 제어하는 것을 알 수 있었다. 그리고 구조물의 비대칭성과 수평 가진으로 인하여 수직 및 수평 방향의 진동제어가 서로 다른 제어효과를 보였다. 이와 같은 제어효과는 비대칭 사장교와 같은 유연하며 비대칭인 구조물에 준능동의 MR 댐퍼가 효과적으로 지진진동을 제어하는 것으로 평가되었다.

• Smart Structures and Systems
• /
• 제16권2호
• /
• pp.329-345
• /
• 2015

As commonly known, sensor errors and faulty signals may potentially lead structures in vibration to catastrophic failures. This paper presents a new approach to deal with sensor errors/faults in vibration control of structures by using the Fault detection and isolation (FDI) technique. To demonstrate the effectiveness of the approach, a space truss structure with semi-active devices such as Magneto-Rheological (MR) damper is used as an example. To address the problem, a Linear Matrix Inequality (LMI) based fixed-order $H_{\infty}$ FDI filter is introduced and designed. Modeling errors are treated as uncertainties in the FDI filter design to verify the robustness of the proposed FDI filter. Furthermore, an innovative Fuzzy Fault Tolerant Controller (FFTC) has been developed for this space truss structure model to preserve the pre-specified performance in the presence of sensor errors or faults. Simulation results have demonstrated that the proposed FDI filter is capable of detecting and isolating sensor errors/faults and actuator faults e.g., accelerometers and MR dampers, and the proposed FFTC can maintain the structural vibration suppression in faulty conditions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.980-985
• /
• 2008

This paper presents vehicle road test of a semi-active suspension system equipped with continuously controllable magnetorheological (MR) dampers. As a first step, front and rear MR dampers are designed and manufactured based on the optimized damping force levels and mechanical dimensions required for a commercial middle-sized passenger vehicle. After experimentally evaluating dynamic characteristics of the MR dampers, the test vehicle is prepared for road test by integrating current suppliers, real-time data acquisition system and numerous sensors such as accelerometer and gyroscope. Subsequently, the manufactured four MR dampers (two for front parts and two for rear parts) are incorporated with the test vehicle and a skyhook control algorithm is formulated and realized in the data acquisition system. In order to emphasize practical aspect of the proposed MR suspension system, road tests are undertaken on proving grounds: bump and paved roads. The control responses are evaluated in both time and frequency domains by activating the MR dampers.