• 인간행동과 음악연구
• /
• 제13권1호
• /
• pp.1-18
• /
• 2016

본 연구는 아동의 리듬 수행 능력과 인지 능력 간 상관관계를 알아보고자 하였다. 이를 위해 평균 연령 9세의 초등학생 59명을 대상으로 iPad 기반 리듬 수행 검사, 숫자 외우기 검사(DST), 아동 색선로 검사(CCTT), 키보드를 활용한 자가탭핑 검사를 진행하였다. 검사 결과, 리듬 재산출의 정확도(accuracy)를 측정하는 리듬 수행 검사 1단계 10개 문항은 자가탭핑 평균속도(s)와 유의한 상관관계가 나타났으며, 리듬 수행 검사 2단계에서 측정하는 그룹핑(grouping) 능력은 CCTT 검사 결과와 유의한 상관관계가 있었다. 특히 문항 특성에 따른 결과를 분석한 결과 일정한 리듬이 두 번 이상 연속으로 반복되어 제공되는 리듬꼴의 정확한 수행은 자가탭핑 속도와 부적 상관관계가 있었으며, 분할박이 많은 리듬꼴의 리듬 수행력은 CCTT, 즉 집행기능과 유의한 상관관계가 있는 것으로 나타났다. 본 연구 결과 리듬 재산출 과제가 초등학교 학령기 아동의 인지 기능 검사 결과와 유의한 상관관계에 있다는 것을 확인하였다. 또한 아동이 산출하는 자가탭핑 속도, 즉 내적 리듬 특성이 인지 기능과 상관관계에 있음을 알 수 있었다. 본 연구는 학령기 아동의 리듬 수행력과 관련된 기초 자료를 제시하고, 이러한 리듬수행력이 인지 기능의 측정 지표가 될 수 있는 가능성이 있음을 시사한다. 본 연구에서 도출된 결과를 통해 추후 리듬꼴의 특징 및 리듬 과제의 난이도에 따른 리듬 수행력이 학령기 아동의 인지적, 정서행동적, 음악적 특성을 다각적으로 평가할 수 있는 가능성 또한 제언되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.120-123
• /
• 2003

To investigate the characteristics of the single dendrimer molecule, we attempt to measure morphology and electrical properties of the self-assembled dendrimer on Au (111)substrate with SPM(scanning probe microscopy). The same self-assembly procedure was used for two different concentrations, $10{\mu}mol/ml$ and $100{\mu}mol/ml$. The case of lower concentration, we can measure the diameter and the height of the single molecule with the tapping mode AFM image. The imaged single molecules were dome shaped and the average diameter and height were 15.6 nm, 1.2 nm respectively. From these sizes, we can calculate the volume of the single molecule. The volume of the single molecule was estimated about $116nm^3$. However, that of higher concentration, it is difficult to obtain obvious image of the single molecule. To add to, I-V characteristics were investigated using STM, on which the phenomenon of negative differential resistance (NDR)was observed between 0.14 V and 0.24 V reproductively.

• 구강회복응용과학지
• /
• 제17권3호
• /
• pp.205-211
• /
• 2001

The aim of this investigation was to evaluate successfully functioning implants stability in the partially edentulous mandibular molar sites by resonance frequency measurements. Resonance frequency measurement is more objective and clinically non-invasive method than any other methods had been used. In this study, $Osstell^{TM}$ (Integration Diagnostics, Sweden) was used. 15 patients ( 7 males, 8 females ) were received each 2 implants in their mandibular unilaterally partial edentulous molar sites. Total 30 implants were installed, 28 implants were $Br{\aa}nemark^{(R)}$ self-tapping fixtures(MK II, Nobel Biocare, Sweden) and 2 were $3i^{(R)}$(USA) self-tapping fixtures. Minimum of functional loading durations was 12 months and there were no significant marginal bone resorptions and peri-implant problems. From this test, the following results were drawn: 1. Mean ISQ values of implants in the first and second mandibular molar area were $73.66{\pm}4.45$, $71.93{\pm}3.41$, respectively. There was no significant difference between two groups(p>0.05). Also mean ISQ value of total sum was 72.8. 2. Mean ISQ values of implants in males and females group were $71.64{\pm}4.06$, $73.81{\pm}3.76$, respectively. And there was no significant difference between two group(p>0.05). 3. Correlation between implant lengths and ISQ values was weak(r=0.128).

• Journal of the Korean Wood Science and Technology
• /
• 제49권1호
• /
• pp.93-102
• /
• 2021

In this article, withdrawal resistances of axially loaded self-tapping screws on wood products made by Korean Larch were predicted with existing estimation equation, and compared with experimental test data. The research was required because no design methodology for the withdrawal resistance of self-tapping screw is present in Korean building code (KBC). First, the withdrawal resistance of wood screw was predicted to use the withdrawal design value estimation equation in National Design Specification for Wood Construction (NDS). Second, three types of wood products, solid wood, cross-laminated timber (CLT) and plywood, were utilized for withdrawal test. For decades, various engineered wood products have been developed, especially cross-laminated timber (CLT) and hybrid timber composites such as timber composites of solid wood and plywood. Therefore, CLT and plywood were also investigated in this study as well as solid wood. Finally, the predicted values were compared with experimentally tested values. As the results, the tested values of solid wood and CLT were higher than the predicted values. In contrast, it is inaccurate to predict withdrawal resistance of plywood since prediction was higher than tested values.

• Steel and Composite Structures
• /
• 제44권3호
• /
• pp.423-436
• /
• 2022

This paper proposes an innovative thin-walled square concrete filled steel tubular (CFST) column with an octagonal/circular lining steel tube, in which the outer steel tube and the inner liner are fabricated independently of each other and connected by slot-weld or self-tapping screw connections. Twelve thin-walled square CFST columns were tested under quasi-static loading, considering the parameters of liner type, connection type between the square tube and liner, yield strength of steel tube, and the axial load ratio. The seismic performance of the thin-walled square CFST columns is effectively improved by the octagonal and circular liners, and all the liner-stiffened specimens showed an excellent ductile behavior with the ultimate draft ratios being much larger than 1/50 and the ductility coefficients being generally higher than 4.0. The energy dissipation abilities of the specimens with circular liners and self-tapping screw connections were superior to those with octagonal liner and slot-weld connections. Based on the test results, both the finite element (FE) and simplified theoretical models were established, considering the post-buckling strength of the thin-walled square steel tube and the confinement effect of the liners, and the proposed models well predicted the hysteretic behavior of the liner-stiffened specimens.

• 아동학회지
• /
• 제29권5호
• /
• pp.65-78
• /
• 2008

This study examined whether parental psychological control influences adolescents' depressive feelings through personality features of dependency and self-criticism. Participants were 315 high school students (M=16 years) who completed questionnaires tapping two types of parental psychological control and student personality and depressive symptoms. Both girls and boys perceived equal levels of maternal and paternal separation-anxious psychological control. Boys perceived higher achievement- oriented psychological control of fathers than mothers; girls perceived equal levels of maternal and paternal achievement-oriented control. Structural relations between types of psychological control, personality features, and depressive symptoms were equivalent for both mothers and fathers and for both boys and girls. Results confirmed that separation-anxious and achievement-oriented control have negative effects on adolescents' adjustment through differential pathways; dependency and self-criticism, respectively.

• 대한두개안면성형외과학회지
• /
• 제23권1호
• /
• pp.23-28
• /
• 2022

Background: Intermaxillary fixation (IMF) is a technique that allows for the reduction and stabilization of mandibular fractures. Several methods of IMF, such as self-tapping screws or arch bars, have been developed. This study aimed to validate the usefulness of IMF with a self-tapping screw compared to IMF with arch bars with focus on the patients' perspective. Methods: We retrospectively reviewed the medical records of all patients who were treated for mandibular fractures at our hospital between August 2014 and February 2021. A total of 57 patients were enrolled in this study. Thirteen patients were excluded from the analysis: three patients were lost to follow-up, and 10 patients did not undergo IMF. Finally, 44 patients were analyzed, of which 31 belonged to the arch bar group, and 13 belonged to the screw group. Patient discomfort and pain during IMF application and removal were analyzed using a patient self-assessment questionnaire. The surgeon also assessed oral hygiene, IMF stability, and occlusion. Results: We applied IMF to 34 men (77%) and 10 women (23%). The mean age of the patients was 37.3 years. The most common fracture site was the angle (30%), followed by the parasymphysis (25%), the body (23%), the condyle (11%), and the ramus (11%). Patient discomfort and oral hygiene were statistically favorable in the screw group. The IMF application time was statistically shorter in the screw group (p< 0.001). IMF stability was not statistically different between the two groups. The pain score during IMF removal was lower in the screw group (p< 0.001). Conclusion: Compared to arch bars, IMF screws provide more comfort during the IMF period, help maintain favorable oral hygiene, and have a shorter application time. From the patient's perspective, IMF screws are an excellent alternative to conventional arch bars when applicable.

• Journal of the Korean Wood Science and Technology
• /
• 제50권1호
• /
• pp.1-11
• /
• 2022

To evaluate the bearing strength of red pine cross-laminated timber (CLT) with self-tapping screw (STS), which is widely used as a fastener for connection in CLT building, the bearing test was conducted. Accoring to the STS's diameters (8, 10, 12 mm), the bearing test specimens with half hole were manufactured. Bearing strength was compared and reviewed in consideration of the configuration in STS and the loading direction to the grain of red pine. As a result of the bearing test on the STS's diameter, the yield bearing load increases as the larger diameter of the STS in all directions of the red pine. The bearing strength of the thread part (thread + tip) was higher than the shank part (shank + shank cutter). In compared with the directions to the grain of red pine, the bearing strength of the cross section parallel to the loading direction was the highest, and the tangent section was the lowest bearing strength. The average bearing strength of the loading direction in parallel to the grain was 23.43 MPa, which was about 45% higher than the average 16.16 MPa in perpendicular to the grain. The predicted bearing strength calculated by Eurocode (EN) and Korean Building Code (KBC)'s equation was lower than the experimental value. It is nessesary to propose the new equations of bearing strength reflected the configuration information of STS.

• 한국한의학연구원논문집
• /
• 제18권2호
• /
• pp.123-130
• /
• 2012

Objectives : The purpose of this study is to identify the origin of meridian-based psychotherapy, and thereby utilize this technique more flexibly and widely, as well as use our findings as the base data for the development of unique and oriental medicine-based psychotherapies. Methods : This study investigated various activities and references of meridian-based psychotherapy developers in historical order. For the books that have been translated into Korean, the translated books were examined as priority. Otherwise, examination was based on original books. Results : The study results were as follows. EFT (Emotional Freedom Techniques) is a technique completed by combining the psychological reversal, acupuncture point tapping, and gamut series in TFT (Thought Field Therapy), and the affirmations that were formed by reflecting the deep understanding on languages derived from NLP (Neuro Linguistic Programming). ESM (Emotional Self Management) can be viewed as having applied the implications of cognitive therapy and hypnosis while accepting the treatment of TFT as it is. Roger J. Callahan developed TFT by adopting theories such as AK(Applied Kinesiology), acupuncture, NLP, quantum mechanics, and split brains. On the EFT, ESM, TFT, the method for stimulating acupuncture points appears to be tapping, which is one technique of the oriental traditional exercise and manual techniques(導引按蹻). Tapping may be the English translation of Bak-beop(拍法). Conclusions : When the oriental medicine techniques that enable meridian tuning are applied along with accommodating Western psychological theories actively, this can not only help use meridian-based psychotherapy more flexibly, but also enable the development of new oriental medicine-based psychotherapies.

• The Journal of Advanced Prosthodontics
• /
• 제14권3호
• /
• pp.133-142
• /
• 2022

PURPOSE. A large number of studies have suggested the practicability and predictability of immediate implant function, but few studies have reported marginal bone level changes during sequential loading periods. The purpose of this study was to evaluate the marginal bone remodeling of immediately loaded self-tapping implants both at each time point and during each loading period between two time points. MATERIALS AND METHODS. The patients included in this retrospective study were treated with immediately loaded NobelSpeedy Replace implants between August 2008 and July 2009. Differences in the marginal bone level (MBL) at each time point and the marginal bone level change (ΔMBL) between two time points were analyzed with Bonferroni correction (P < .05). RESULTS. Overall, 24 patients (mean age, 47.3 ± 12.8 years) with 42 immediately loaded implants and a median follow-up of 6.5 years (IQR, 67.8 months) were included. The cumulative survival rate after 10 - 12 years was 95.2%. Continuous but slow marginal bone loss was observed during long-term follow-up. MBL at both 7.5 years and 11 years was significantly lower than that at loading, 6 months, 2 years and 4 years (P < .05). No bone loss difference was found in any period before 4 years of follow up (P > .05). The loading period of 4 years to 7.5 years showed the largest ΔMBL compared to those of other time periods (P < .05). CONCLUSION. Slight bone loss occurred continuously, and more radical changes of marginal bone can be observed during the period of 4-7.5 years. Thus, long-term effective follow-up of immediately loaded implants is needed.