• 한국디지털건축인테리어학회논문집
• /
• 제7권2호
• /
• pp.33-41
• /
• 2007

This thesis aims at understanding Le Corbusier's architecture through study of proportion. Based on the analysis of these texts, four elements - geometry in the outline, diagonal regulation lines in the facade, arithmetic rhythm in the structure, composition in the inner space - were listed. Through these four proportional systems. ten houses of 1920's, designed by Le Corbusier were analysed. The Le Corbusier's proportional system can be classified by two different purposes ; aesthetics and utility standardization for the mass production was reflected. In the later period, the proportion system of 1920's has changed through the process of self-contradiction. But the concept of the golden section and the human scale was reflected on Modulor, which Le Corbusier created in 1940's. Therefore, Le Corbuiser's notion of proportion for harmony of architecture has consistent meaning throughout all of his works from the 1920's.

• 대한방사선기술학회지:방사선기술과학
• /
• 제40권3호
• /
• pp.493-499
• /
• 2017

임상실습 교육과정이 자기학습 발전능력 정도에 대해 분석하고자 수도권에 소재한 방사선학과 3, 4학년생을 대상으로 121명의 설문조사 결과를 분석하였다. 성별에 따른 자기학습 발전능력의 전체 평균은 $3.07{\pm}0.85$로 5점 척도의 기준으로 할 때, 보통 이상의 수준으로 성별에 따라 통계적으로 유의미한 차이를 나타냈다. 학제에 따른 자기학습 발전능력에 대한 결과는 전체 평균은 $3.07{\pm}0.85$로 보통 이상의 자기학습 발전능력 수준으로 학제에 따라 통계적으로 유의미한 차이는 없었다. 학과 선택 동기에 따른 자기학습 발전능력의 결과는 학과의 취업률이 높다고 판단하여 입학한 학생군($3.58{\pm}0.85$)이 높은 자기학습 발전능력 수준을 보였으며, 자아적성에 적합하여 입학한 학생군($2.30{\pm}0.40$)이 상대적으로 낮은 수준을 나타냈다. 진로선택 방향에 따른 자기학습 발전능력의 전체 평균은 $3.08{\pm}0.76$로 보통 이상의 자기학습 발전능력 수준으로 진로에 따라 통계적으로 유의미한 차이를 나타냈다. 임상실습 시 자기학습 능력을 높이는 방안이 필요하다. 아울러 통계적 유의수준의 차이를 보이지 않는 것은 문제점과 다양성을 제시하고 있다고 본다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2000년도 춘계학술대회
• /
• pp.9-26
• /
• 2000

Eventually so as to realize the construction safety, 1 found out the cause of accident and specificities of the construction industry. This study presented to several situations and problems on construction safety. As a result of this study, the below matters must be improved for more effective the construction safety management system. 1. It need to introduce the total construction safety management system. Because there is not effectiveness in the current safety management to the first on the construction field. a. We must consider the safety in the whole parts of the process of the construction and constructors of each part must devide responsibility of the construction safety as a CDM(The Construction Designed Management) used in UK. b. It is desirable to proceed control of safety in the whole parts of the construction to introduce the total safety coordinator that can consult the matters of safety as a law accepted in EU. c. Like management of the construction safety in USA, direction of the construction safety must be made to work exactly by code or manual. d. To improve the organization of the construction safety on the construction field unefficient, it must be introduced safety supervisor, safety coordinator or institutionalization of safety consultant. 2. The law of the construction safety not only have wasteful element but also decrease efficiency by overlapping of regulation, The Ministry of Labour and The Ministry of Construction & Transportation, So laws related with safety must be instituted. a. To realize total safety management, The Ministry of Labour must legislate the basic law about safety management in whole field. b. To legislate the construction safety under one law, and improve efficiency of the overlapping of regulation and the similar law by The Ministry of Construction & Transportation. c. It must be made the law of construction safety that can proper to change of situation in construction. d. The standard of safety must be instituted belong to international level and improved by year. e. We must improve irrational regulation to realize activity of safety self regulating for progress competition in construction industry

• 한국군사과학기술학회지
• /
• 제20권6호
• /
• pp.733-742
• /
• 2017

LADARs are used for important sensors in various applications, for example, terrain information sensors in self driving cars, safety sensors for factory automation, and 3D map constructions. This study develop important component technologies to improve the performance of a LADAR system under development in Korea. The component technologies include diode temperature regulation, reducing distance error in outdoor environment, and signal processing technique for better detection of distant objects. This paper explains the suggested component technologies and experimental results of the developed LADAR system. Also, the developed system is operated and tested an a single axis driving platform to acquire 3D information from 2D LADAR.

• 전기학회논문지
• /
• 제66권3호
• /
• pp.486-492
• /
• 2017

In recent years, renewable energy sources have been mentioned as solution to environmental regulation and energy supply-demand. Energy storage systems are needed to mitigate the intermittent output characteristics of renewable energy sources and to operate micro grid efficiently using renewable energy generation systems. However, despite the necessity of energy storage system, this cannot secure the economical efficiency of the energy storage system by high initial cost. In this paper, a micro grid is constructed to supply electric power to industrial customers by using solar power generation system and energy storage system among renewable energy generation power sources and operated to improve energy independence. In the case study, we use photovoltaic system which is representative renewable energy generation system. Unlike conventional photovoltaic system, this system uses floating photovoltaic system with the advantage of having high output and no land area limitations. It is operated for the purpose of improving energy independence in the micro grid. In order to secure economical efficiency, the energy storage system operates a micro grid with a minimum capacity. Finally, this paper calculates the appropriate subsidy for the energy storage capacity.

• 한국환경과학회지
• /
• 제17권4호
• /
• pp.423-437
• /
• 2008

Until comparatively lately, the annual time series of the $SO_2$ concentration had been shown in a decreasing trend in Ulsan as well as other Korean cities. However, the high concentration of $SO_2$ was frequently found in the specific countermeasure region including the national industrial complex such as Mipo and Onsan in the Ulsan city for the period of $2001{\sim}2004$. There are many conditions that can influence the high concentration of $SO_2$ at monitoring sites in Ulsan, such as: First, annual usage of the fuel including sulfur increased in comparison with the year before in spite of the fuel conversion policy which wants to use low sulfur oil less than 3% and LNG. Second, point source, such as the power plants and the petroleum and chemistry stacks, was the biggest contributor in $SO_2$ emission, as a analyzed result of both the air quality modeling and the stack tole-monitoring system (TMS) data. And third, the air pollutants that occurred in processes of homing and manufacturing of the fuel including sulfur were transported slow into a special monitoring site by accumulating along the frontal area of see-breeze. It was concluded that Ulsan's current environmental policy together with control methods should be changed into the regulation on total amount of emission, including a market-based emission trading with calculating of atmospheric environmental critical loads, for the $SO_2$ reduction like the specific countermeasure for the $O_3$ and PM10 reduction in the Seoul metropolitan area. And this change should be started in the big point sources of $1{\sim}3$ species because they are big contributors of Ulsan's $SO_2$ pollution. Especially it is necessary to revitalize of the self-regulation environmental management. Other control methods for sustaining the $SO_2$ reduction are as follows: maintenance of the fuel conversion policy, reinforcement of the regional stationary source emission standard, and enlargement of the stack TMS.

• 대한감각통합치료학회지
• /
• 제13권1호
• /
• pp.1-12
• /
• 2015

목적 : 본 연구의 목적은 학령전기 아동의 감각처리 능력을 측정하기 위해 사용되고 있는 평가도구의 종류를 알아보고 심리측정학적 특성을 평가하는 것이다. 연구방법 : 감각처리 평가도구는 PubMed, Cochrane, CINAHL, PsycINFO와 같은 전자 데이터베이스를 사용하여 논문을 검색한 뒤, 초록과 원문 검토를 통해 포함기준에 적합한 평가도구를 최종적으로 선택하였다. 결과 : 총 38개의 논문이 최종적으로 분석되었으며, 8개의 평가도구가 확인되었다. 가장 많은 신뢰도와 타당도가 검증된 도구는 Sensory Processing Measure-Preschool(SPM-P)이었으며 신뢰도와 타당도 검증이 부족한 도구로 는 Sensory Experiences Questionnaire(SEQ), Sense & Self-Regulation Checklist(SSRC), 그리고 Sensory Processing Scale Assessment(SPSA)가 있었다. 결론 : 본 연구결과는 임상가와 연구자들이 학령전기 아동에게 적합한 감각처리 평가도구를 선정할 때 근거자료가 될 것이다.

• 정보보호학회논문지
• /
• 제25권2호
• /
• pp.331-342
• /
• 2015

본 논문에서는 기초자치단체 277 기관 중 서울(25개 지역), 전북(14개 지역), 부산(16개 지역)을 선정하여 조례현황 및 관련 법률을 검토하였다. 자치법규 정보시스템을 활용하여 각 지역별 자치법규에서 운용되고 있는 조례 내의 별지서식 내용을 조사 분석하였다. 개인정보 공개 거부감이 있는 부분을 참고하여 총 4가지 항목(주민등록번호, 핸드폰번호, 자택전화번호, 소득정보)을 조사 분석 하였다. 이를 통해, 순환보직이 잦은 공공기관 담당자와 민간 컨설팅 담당자들이 법령과 각종 조례, 규칙을 이해하고 검토할 수 있도록 지자체 법규 개선 방안을 제안한다. 또한, 개인정보보호 관리체계를 활용하여 지자체 서식 개정 검토를 쉽게 할 수 있도록 문서 서식 규정과 별지 서식 검증 할 수 있도록 통제 항목추가를 제안하였다.

• 수산해양교육연구
• /
• 제11권2호
• /
• pp.150-183
• /
• 1999

Korea-Japan Fisheries Agreement concluded in 1965 made a contribution to the stable development of fisheries relationship for both countries until the year of 1980. From the time on thereafter a series of respectable fishery disputes occurred throughout the period of fisheries self-regulation in accordance with alteration of home and abroad conditions. And both countries marched into a cooperation era by enforcement of the new fisheries agreement from the 23 January 1999, because the Fisheries Agreement system of 1965 had many limitations to settle the fundamental fisheries problems. In this paper, the author carried out the legal interpretation, arrangement of historical facts and evaluation of actual results of the Korea-Japan Fisheries Agreement of 1965. The key contents of the Fisheries Agreement were the establishment of 12-nautical mile exclusive fishery zone and the joint-control fishery zone under the principles of maintenance of MSY for fishery resources, freedom of high seas and mutual cooperation. The legal foundation of the conclusion of the Fisheries Agreement were the San Francisco Peace Treaty of 1952 and the four International Conventions on the Law of the Sea of 1958. During the 33 years, the fisheries power of Korea made a rapid stride, on the other hand that of Japan was almost stagnated. And in the meantime, there were very important development on the international law of the sea, for instant, the settlement of 12-nautical mile territorial sea regime and the establishment of 200-nautical mile exclusive economic zone regime. Annual meetings of the Joint Fisheries Committee were not successful to fill the role for conservation of fishery resources. The Fisheries Self-Regulation Agreement concluded in 1980 was also insufficient to accept the new international regime on the law of the sea, for that reason it was terminated on 23 January 1999. But it is true that the Fisheries Agreement of 1965 made a contribution to normalization of fisheries relationship between both countries and fisheries development of Korea.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
• /
• pp.73-76
• /
• 2005

Recently, the demand for the Floating, Production, Storage, and Offloading facility (FPSO) which has some economic and technical advantages, has increased in offshore oil production areas. FPSO vessel dose not have self-propulsion system, but has additional facilities for oil production and positioning system. Main noise sources such as gas turbines, compressors, and pumps, are located on top of the hull (Topside area). In general, the noise regulation for the offshore structure is severer than that of the cargo ship and acceptable noise limit of cabin is specified as 45 dB(A). This paper describes the noise characteristics and the countermeasures for FPSO Topside area through investigation of noise analysis and site measurement results. Proper countermeasures, considering the characteristics of sources and receiver spaces, were applied from the noise prediction and various measurement results. Finally, this ship was successfully delivered with excellent noise properties.